|
| 1 | Attending complaints, by removiong of plumbing fittings such as leakage of bib tabs, angle valve, stop cock, pillar taps, float valves, water tanks, gratings, traps, WCs flushing cistern, waste pipe, WHB, EWCs waste pipe of Kitchen Sink/WHB or similar work for continuty of essential internal water supply/sanitary services by employing an experienced team of plumber and helper to restore the existing/services to the satisfaction of Engr-in-Charge.NOTE :- (i ) T&P including conveyance to reach door to door for attending the jobs will be provided by the contractor.(ii ) Material will be provided by segregation of Complainsts ( 72 Hours/3 days/15 days/30days) to the contractor and will be seperately measured & paid as per item concerned.(iii) The complainsts slip will be collected from complaint cell incharge/JE (Civil) by the contractor or auth rep in writting.(iv ) The area/location of job will be all Md and OTM Accn in AOR of AGE (I ) Manauri |
| 2 | Dismantling/taking down long body/short body bib cock/Stop Cock/Pillar Cock/Angle Cock/Two way angle Cock etc of any pattern or of any type and re-fixing the same after monir repairs such as replacement of washers and minor repair ssuch as jumper brass washer/spindle/caps etc or re-fixing old serviceable ong body/short body bib cock/Stop Cock/Pillar Cock/Angle Cock/Two way angle Cock complete all as specified and directed.NOTE:- Any major parts such as jumpers brass/spindles/caps any type etc to be measured as supply only in conjuction with this item and paid accordingly) |
| 3 | Supply only GI water tubing/pipe 15mm bore with all fittings fixed to wall or laid in floors or ceilings complete all as specified and directed. |
| 4 | Supply only GI water tubing/pipe 20mm bore with all fittings fixed to wall or laid in floors or ceilings complete all as specified and directed. |
| 5 | Supply only 15mm CP Pillar Cock chromium plated fancy type complete all as specified and directed. |
| 6 | Supply only 15mm dia PTMT pillar cock complete all as specified and directred. ( Make - Prayag or equivalent with Cat Part NO - 7302) |
| 7 | Supply only Bib taps, 15mm dia chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in position (Make - Cera or equivalent) |
| 8 | Supply only 15mm dia PTMT bib cock with flange complete all as specified and directed.( Make- Prayag or Equivalent ) |
| 9 | Supply only 15mm CP angle cock with flange complete all as specified and directed. ( Make - Cera or equivalent) |
| 10 | Supply only 15mm CP 2 way bib cock with flange ( Make- Cera or equivalent) |
| 11 | Supply only 15mm CP stop cock with flange ( Make- Cera or equivalent) |
| 12 | Supply only 15mm CP concealed stop cock with flange ( Make- Cera or equivalent) |
| 13 | Supply only CP sink bib cock 15mm with flnge ( Make- Cera or equivalent) |
| 14 | Supply only 15mm shower Rose of 150mm dia complete ( Make - Cera or equivalent with Cat part No - F70102211SS) |
| 15 | Supply only 15mm dia health faucet ABS Body with 1.25mtr SS Braided connection pipe complete ( Make Cera or equivalent) |
| 16 | Supply only tower rail brass chromium plated 600mm ( 24\\") complete ( Make- Cera or equivalent Cat Part No - F5007103) |
| 17 | Supply only Soap Dish complete all as specified and directed..( Make - Cera or equivalent Cat Part No - F5007106) |
| 18 | Supply only stainless steel toilet paper holder complete ( Make- Cera or equivalent Cat Part No- F5007109) |
| 19 | Supply only Coat Hook of 6 hanger ( Make- Cera or equivalent Cat Part No- F5003113) |
| 20 | Supply only Corner Glass shelves ( Large) 300 x 300mm complete. ( Make- Cera or equivalent Cat Part No- F5005103) |
| 21 | Supply only waste coupling full thread of 32/40mm dia complete all as specified and directed. |
| 22 | Supply only 32/40mm in size brass flush kit/valve piston for flushing cistern complete all as specified and directed. |
| 23 | Supply only cover for HDPE water tank of capacity 500/1000 ltrs roatating type including frame and nuts and bolts |
| 24 | Dismantling water tanks of 500 Ltr capacity complete all as specified and directed. |
| 25 | Dismantling water tanks of 1000 Ltr capacity complete all as specified and directed. |
| 26 | S&F in position Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of 500 Ltr capacity |
| 27 | S&F In position Rotational moulded polye thylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of 1000 Ltr capacity |
| 28 | Dismantling existing water tanks setting aside , Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, of 500 ltr capacity and fixed in same position |
| 29 | Dismantling existing water tanks setting aside , Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, of 1000 ltr capacity and fixed in same position |
| 30 | S&F in repairs vitreous china squatting pattern pan \\"Orrisa Pattern size 580 x 440mm whitemwith integral foot rest complete including provision of cement concrete bedding and connection to trap & to flushing cistern pipe, anti syphonic pipe etc complete including making good to disturbed portion all as per directed by Engr-in-Charge. |
| 31 | S&F in repair vitreous china wash down water closet pan ( Padastal pattern/EWC) white with fixing bolts , trap, including connection to drain (or out going pipe) & to flushing pipe , anti syphonic pipe / flush pipe connect to flushing cistern alongwith WC Seat Cover complete all as sspeciifed and direced by Engr-in-Charge. |
| 32 | Supply only Jumper walls/washers with brass for repair of 15mm bore bib tabs/Stop cock/pillar taps |
| 33 | Supply only brass spindles for repair of 15mm bore bib tabs/Stop cock/pillar taps |
| 34 | S&F in repair 10 ltr capacity PVC valveless syphonic action flushing cistern low level white with inlet ball valve, float and handle including brackets and fixed in position complete all as specified and direced. |
| 35 | S&F in repair vitreous china Wash Hand Basin , white flat baack size 580mm x 480mm excluding taps, waste pipe, chain and plug and porcelain stopper but including brackets complete all as specified and direced. |
| 36 | S&F in repair vitreous china half stall urinal (Back or corner wall type) complete including provision oand fixing plugs, bedding urinal against wall in cement mortar 1:2, seuring urinal to,plugs with and including 60cm long brass scfrew pointing around urinal back, in cement mortar fixing automatic flushing cistern with brackets flush pipe, gtating and unions for discharge pipe complete. |
| 37 | Supply only PVC Waste pipe for kitchen sink, WHB, Urinal complete all as specified and directed. |
| 38 | S&F in repair SS Kitchen plate ack of size 787 x 762 x 254 mm of 0.60mm thickness fixed with necessary fixing arrangement includding necessary fastners, screw etc, Make :- Blue star or equivalent with Cat Part No - SS KPR-314 |
| 39 | 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 40 | Supply only PVC Connection pipe 15mm size with PTMT nuts of length 600mm long complete all as specified and directed. |
| 41 | S&F in repair flush pipe of polythene of low or high density or PVC, 32mm dia for low level cistern to padastal pan, including joints. |
| 42 | Supply only Grating doom with hole 100mm dia of PTMT (Min weight 25 gms) all as directed and specified. |
| 43 | S&F in repair 110mm bore pipe PVC (SWR) pipes single sockeets in any length with rubber ring joints fixed to wall/floors complete all as directed. |
| 44 | S&F 110mm PVC (SWR) bends any rdius |
| 45 | S&F in repair 110mm PVC (SWR) 'P' Trap/ 'S' Trap |
| 46 | S&F in repair wall mounted stainless steel automatic urinal flush sensor set dual power supply mode chromium plated sensor for urinal complete all as specified and directed. |
| 47 | Supply only 15-20mm (out side - 20mm dia) GI Reducer |
| 48 | Supply only 20mm bore GI union Complete |
| 49 | Supply only 20mm bore GI Elbow Complete |
| 50 | Supply only 20mm bore GI Socket Complete |
| 51 | Supply only 20mm bore GI Tee Complete |
| 52 | Supply only 15-20mm bore GI Tee Complete |
| 53 | Supply only 15mm bore GI union Complete |
| 54 | Supply only 15mm bore GI Elbow Complete |
| 55 | Supply only 15mm bore GI Socket Complete |
| 56 | Supply only 15mm bore GI Tee Complete |
| 57 | Supply only 15-20mm bore GI Tee Complete |
| 58 | Supply only 15mm bore 200mm long nipple |
| 59 | Supply only 15mm bore 150mm long nipple |
| 60 | Supply only 15mm bore 100mm long nipple |
| 61 | Supply only 15mm bore 50mm long nipple |
| 62 | Supply only 20mm bore 150mm long nipple |
| 63 | Supply only 20mm bore 100mm long nipple |
| 64 | Supply only 20mm bore 50mm long nipple |
| 65 | Supply only 20mm bore 200mm long nipple |
| 66 | Supply only 15mm GI Nipple fully threaded with two numbers check uts and washers 100mm long for PVC tank with back nut and washers for inlet and outlet pipe of different sizes. |
| 67 | Supply only 20mm GI Nipple fully threaded with two numbers check uts and washers 100mm long for PVC tank with back nut and washers for inlet and outlet pipe of different sizes. |
| 68 | Attending complaints, related carpenter work and obtaining complaint from B/R complaints cell including repair/easing of doors re-fixing or tightening of doors, windows, resecuring of door/winddow wire guage, (Fixing only) builders hardwares, helical door spring including use of all types of nails, screw etc which are required to make good the work, use of any other stores/fittings shall be paid seperatrely under supply only items in building to continuty of essential carpentry service by employing a team of experienced carpenters with a helpers to restore the existing service to the satisfaction of engineer -in-Charge and including taking down and removing of journey fittings etc, complete all as directed. T&P for attending the jobs will be provided by the contractor .NOTE:- ( i) T&P including convence to reach door to door for attending the jobs will be provided by the Contractor.(ii ) The complaint slip will be collected from complaint cell Incharge/JE (CIV) by the contractor's supervisor/(Auth Rep.(iii) The area/Location of job will be all MD and OTM accn in AOR of AGE (I ) |
| 69 | Hacking out old broken glass from mental frame including punching or drilling out old glazing complete |
| 70 | M&L for 4mm thick plain sheet glass ordinary quality including glazing with putty area n. exc 0.50 Sqm in each pane. |
| 71 | Supply only 18/19mm thick commercial plywood interior grade both sides fixed with screws to timber frame work edge chamfered including beading/battens as required including taking down as directed by Engr-in-Charge complete. |
| 72 | Supply & Fixed in repair stainless steel wire cloth 0.36mm nominal dia of wire and avrage width of aperture 1.40mm and fixed with stainless steel wire staples complete |
| 73 | Supply only 2nd calss hard wood plain fillets square/rectangular in section, sectional area exc 6 sqcm but n.exc 13 sqcm, wrought and fixed with nails complete |
| 74 | Supply only 300mm long stainless steel sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, complete all as specified and directed. |
| 75 | Supply only 300mm long aluminium anodised sliding door bolt with hasp staple (Bolt type) and fixing clips of sheet, complete all as specified and directed. |
| 76 | Supply only 100 mm long stainless steel hinges all as specified and as directed |
| 77 | Supply only 100 mm long stainless steel handle all as specified and as directed |
| 78 | Supply only 150 mm long stainless steel handle all as specified and as directed |
| 79 | Supply only 100 mm long Aluminium anodised handle all as specified and as directed |
| 80 | Supply only 150 mm long aluminium anodised handle all as specified and as directed |
| 81 | Supply only 150 mm long aluminium anodised handle all as specified and as directed |
| 82 | Supply only 100 mm long stainless steel barrel tower bolt all as specified and as directed |
| 83 | Supply only 150 mm long stainless steel barrel tower bolt all as specified and as directed |
| 84 | Supply only 100 mm long Alumionioum anodised barrel tower bolt all as specified and as directed |
| 85 | Supply only 150 mm long Aluminium anodised barrel tower bolt all as specified and as directed |
| 86 | Supply only 300mm size mild steel rat rail rod pattern door springs ISI marked including roller & roller plate etc complete |
| 87 | Supply only 100mm size 4- lever mild steel mortice lock vertical type with two keys etc complete |
| 88 | Supply only floor door stopper of aluminium anodised body and tounge anodised with hard drawn steel spring of cover plate length 150mm long |
| 89 | S&F in repair aluminium anodised cast body door closer hydraulically regulatede designation No-2 universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg complete |
| 90 | Supply only 100mm aluminium anodised hasp stapple, safety type, with mild steel hinge pin includeding bolts to hinge plate and fixed with screws. |
| 91 | S&F in repair stainless steel curtain rod 20mm dia including brackets and curtain rod holders of suitable size at ends etc complete all as specified and directed. |
| 92 | Attending complaints related to black smith and obtaining completion from user for resecuring/easing/minor repair to make functional of steel door steel window, steel rolling shutter and gates etc by greasing, oiling & cleaning and changing of required fittings, fixture & componens etc by employing experienced black smisth with a helper to rstore the existing service to the satisfaction of Engr-in-Charge by using store issued by the Dept. All as directed T&P for attending the jobs will be provided by the Contractor. NOTE:-(i ) T&P including convence to reach door to door for attending the jobs will be provided by the Contractor.(ii ) Mateial will be provided by the department through maintenance cell and necessary salvage/unused mateial deposit back to complaint cell incharge/JE (CIV).(iii ) The complaint slip will be collected from complaint cell incharge/JE (CIV) by the contractor supervisor( Auth Rep)(iv The area/Location of job will be all MD and OTM accn in AOR of AGE (I ) |
| 93 | Supply only 250mm size mild steel peg stay fixed to steel window (as per sample) complete all as specified. |
| 94 | Supply only mild steel handle for steel window etc complete all as specified and directed. |
| 95 | Spot welding in repair for fixing hinges/handle/bolts/helical door spring etc complete |
| 96 | Demolition of brick work built in cement mortar |
| 97 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 |
| 98 | M&L for Brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 but except bricks |
| 99 | Taking down cement plaster incl racking out joints hacking for key scrubbing down with water etc. |
| 100 | M&L 10mm thick plaster in CM (1:6) on brick or concrete surfaces of internal walls finished even and smooth without using extra cement |
| 101 | M&L 5mm thick plaster in CM (1:3) on concrete/brick surfaces of ceilings. |
| 102 | M&L 15 mm thick plaster in CM (1:4) finished fair and even on brick/concrete surfaces on ext external surface of wall. |
| 103 | M&L preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed |
| 104 | M&L for preparing new concrete/wood susrface of ceiling of any description or otherwise and applying three coats of white wash complete all as specified and directed |
| 105 | M&L for preparing new plastered surface of wall and applying two coats of cement base paiont over a coat of primer complete |
| 106 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 107 | M&L for Screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 |
| 108 | M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 109 | M&L for Rendering/backing coat of 10mm thick in CM 1:3 to receive the floor finish |
| 110 | M&L for Glazed ceramic tiles in vertical surface/skirting 300x 200x 7300 x 450 x 7mm mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the existing surface. |
| 111 | Demolition of cement concrete un-reinforced in any position and paving not exc 15 cm thick above or below ground level |
| 112 | ML cement conc (1:2:4) type B1 (using 20mm graded stone agg) in floors 40mm thick finished even and smooth without using extra cement. |
| 113 | Supply only Plastic dividing strips,1.5mm thick strip and 38mm wide fixed in position complete |
| 114 | M&L for PCC 1:3:6 type C2 using 40mm graded aggregate as in plinth protection finished even and smooth without using extra cement complete all as specified and directed |
| 115 | Resecuring or easing & adjusting without taking down door shutter area exc 1.00 Sqm but n. exc 2.00 Sqm each |
| 116 | Taking down chowkhat with shutters without taking off shutters from the frame area exc 1.50 Sqm but n. exc 4.00 Sqm each |
| 117 | Taking down chowkhat with shutters without taking off shutter from the frame area n. exc 1.50 Sqm each |
| 118 | Taking down shutters of any description exc 1.0 Sqm but n. exc 2.00 Sqm each |
| 119 | Dismantling MS Work of any description not otherwise provided for |
| 120 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 121 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing |
| 122 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 123 | S&F for Pressed steel door frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed |
| 124 | M&L for PCC 1:3:6 type C2 using 12.50mm graded aggregate as in filling of hollow pressed steel frame etc complete |
| 125 | M&L for IINd class hard wood Glazed and skeleton shutters, 30mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); |
| 126 | M&L for Flush shutters, 30mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 127 | S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples |
| 128 | S&F 100 butt hinges, heavy weight cold rolled mild steel and fixed in position complete |
| 129 | S&F 75 butt hinges, heavy weight cold rolled mild steel and fixed in position complete |
| 130 | S&F extruded aluminium alloy handle aluminium anodised 150mm longand fixed in position complete |
| 131 | S&F Aluminium anodised, barrel tower bolts 150mm longof ex truded section and fixed |
| 132 | S&F for Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed |
| 133 | M&L preparing new wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer. |
| 134 | M&L preparation of new steel surfaces of any description over 10cm width or girth, not other wise described and applying two coat of synthetic enamel paint over a coat of primer. |
| 135 | Taking down aluminium shutters and dismantling styles & rails including glass panes/particle board carefully refabricated and re-fixing in frame using all old material including replacement of required neoprene packing, cleats screws with necessary Aluminium angle cleat screw etc, complete all as specified and directed by Engr-in-Charge. |
| 136 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty made and fixed complete all as specified and directed. |
| 137 | S&F Towel Rail 450mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) |
| 138 | Supply and fixing in replacement of modular switch , one way 6 Amps 1 module |
| 139 | Supply and fixing in replacement of modular switch, one way 16 Amps 1 module |
| 140 | Supply and fixing in replacement of modular socket 6 A, 2/3 pin combined 2 module |
| 141 | Supply and fixing in replacement of modular socket 16 A, 3/5 pin combined 2 module |
| 142 | Supply and fixing in replacement modular fan regulator step type 120W 2 module |
| 143 | Supply and fixing in replacement LED light fitting with frame, driver etc in 20 W 4 feet long white colour mounting on tow Nos of PVC round/ square block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out to unsv old fittings complete as directed. Make:- Bajaj cat ref no BCSLB 20 WH and equivalent in Havells/Phillips/ Crompton |
| 144 | Supply and fixing in replacement LED tube light fitting with frame, driver etc in 10 W 2 feet long white colour mounting on tow Nos of PVC round/ squire block on surface of wall / beam etc incl making all electric connection using three core copper cable drawn through in PVC flexible counduit pipe from ceiling rose to fittings including taking out to unsv old fittings complete as directed. Make:- Bajaj cat ref no BCSLB 10 WH and equivalent in Havells/Phillips/ Crompton |
| 145 | Supply and fixing 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning |
| 146 | Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker MCB of SPN 32 AMP in the MCB DB complete with connection testing and commissioning. |
| 147 | Supply fixing in replacement of 35 watt LED building security light light fitting energy saving IP 65 protection including making electric connection using three core copper flexible cable drawn through in PVC flexible conduit complete all as specified and directed. |
| 148 | Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.(ii) Make of material shall be as per mentioned in Particular specifications or Appendix 'B' to Particular specifications as approved by AGE (I) AF manauri Please Enable Macros to View BoQ information |
