|
| 1 | Dismentalling of existing PVC pipe from underground including necessary earth cutting etc.and dismentalled pipes, couplers, tees,etc properly stacking in safe site as per CPWD Specification & direction of Engg-in-charge.a) Pipes,cables etcexceeding 75 mm dia but not exceeding 315 mm dia. |
| 2 | Labour charge for laying different dia rigid UPVC pipes of Working Pressure 4.0 kg/ sq.cm. complete with necessary coupler and solvent cement joints.( pipes, coupler and solvent cement will be issued free of cost ) as per CPWD Specification & direction of Engineer-in-charge.a) 90 mm dia. |
| 3 | b) 110 mm dia. |
| 4 | c) 140 mm dia. |
| 5 | d) 160 mm dia. |
| 6 | e) 200 mm dia. |
| 7 | f) 250 mm dia |
| 8 | g) 315 mm dia |
| 9 | Excavating trenches of required width for pipes, cables etc. including excavation for sockets and dressing of sides ramming of bottoms, depth minimum 1.25m including getting out the excavated soil and returning the soil as required in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposal of surplus excavated soil as directed within a lead of 50 m as per CPWD specification and direction of the Engineer - in - charge.A) All kinds of soil.a) Pipes, cables etc. exceeding 75mm dia. but not exceeding 160mm dia. |
| 10 | b) Pipe , cables etc. exceeding 200 mm dia but not exceeding 315 mm dia |
| 11 | Providing and laying different dia rigid UPVC pipes of Working Pressure 4.0 kg/sq.cm. complete with necessary coupler and solvent cement as per CPWD Specification & direction of Engineer-in-charge.a) 90 mm dia. |
| 12 | b) 110 mm dia. |
| 13 | c) 140 mm dia. |
| 14 | d) 160 mm dia. |
| 15 | e) 200 mm dia. |
| 16 | f) 250 mm dia |
| 17 | g) 315 mm dia |
| 18 | Providing and fitting fixing of G.I hydrant suitable for PVC pipes as per standard specification complete as per direction of Engg-In-Charge. (Rate excluding the cost of NTP control valve).(a) 80 x 50 mm dia: |
| 19 | Labour charge for repairing of leakage in existing UPVC distribution system including required earth cutting and fitting fixing of necessary coupler etc. complete and refilling the trench with available excavated earth as per direction of the Engineer-In-Charge. (Payment of couplers, tees, reducers etc will be made separately)a) 315 mm dia. |
| 20 | b) 250 mm dia to 110 mm dia |
| 21 | c) 90 mm dia. |
| 22 | Providing & fixing rigid U.P.V.C socket (coupler) suitable for UPVC pipes as per I.S. specification coupler with cement solvent.a) 90 mm dia. |
| 23 | b) 110 mm dia. |
| 24 | c) 140 mm dia. |
| 25 | d) 160 mm dia. |
| 26 | e) 200 mm dia. |
| 27 | f) 250 mm dia |
| 28 | g) 315 mm dia |
| 29 | Providing & fitting fixing rigid UPVC bend(30 degree,45 degree,60 degree, 90 degree) for UPVC pipes as per IS specification of Working pressure 4.0 kg/sq.cm as per CPWD Specification & direction of Engineer-in-chargea) 90 mm dia. |
| 30 | b) 110 mm. Dia |
| 31 | c) 140 mm. Dia |
| 32 | d) 160 mm. Dia |
| 33 | e) 200 mm dia |
| 34 | f) 250 mm dia |
| 35 | g) 315 mm dia |
| 36 | Providing and fitting fixing of different dia rigid UPVC equal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of Working pressure 4.0 kg/sq.cm confirming to IS: 10124 (Part-V) as per CPWD Specification & direction of Engineer-in-charge.Equal Teea) 90 x 90 x 90 mm. Dia |
| 37 | b) 110 x 110 x 110 mm. Dia |
| 38 | c) 140 x 140 x 140 mm. Dia |
| 39 | d) 160 x 160 x 160 mm. Dia |
| 40 | e) 200 x 200 x 200 mm. Dia |
| 41 | f) 250 x 250 x 250 mm dia |
| 42 | g) 315 x 315 x 315 mm dia |
| 43 | Providing and fitting fixing of different dia rigid UPVC unequal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of working pressure 4.0 kg/sq.cm confirming to IS: 10124 (part-V) as per CPWD Specification & direction of Engineer-in-charge.Unequal Teea) 110 x 110 x 90 mm. Dia |
| 44 | b) 140x140x110 mm.dia |
| 45 | c) 140 x 140 x 110 mm.dia |
| 46 | d) 160 x 160 x 90 mm dia |
| 47 | e)160 x 160 x 110 mm.dia |
| 48 | f) 160 x 160 x 140 mm.dia |
| 49 | g) 200 x 200 x 90 mm.dia |
| 50 | h) 200 x 200 x 110 mm.dia |
| 51 | i) 200 x 200 x 140 mm. dia |
| 52 | j) 200 x 200 x 160 mm.dia |
| 53 | k) 250 x 250 x 90 mm.dia |
| 54 | l) 250 x 250 x 110 mm.dia |
| 55 | m) 250 x 250 x 140 mm.dia |
| 56 | n) 250 x 250 x 160 mm.dia |
| 57 | o) 250 x 250 x 200 mm.dia |
| 58 | p) 315 x 315x 90 mm dia |
| 59 | q) 315 x 315x 110 mm dia |
| 60 | Providing and fitting fixing rigid UPVC Reducing socket (one size lower at one end, both end socketted) suitable for pipes of Working pressure 4.0 kg/sq.cm. as per CPWD Specification & direction of Engineer-in-charge.a) 110 x 90 mm dia. |
| 61 | b) 140 x 110 mm dia. |
| 62 | c) 160 x 140 mm dia. |
| 63 | d) 200 x 160 mm dia. |
| 64 | e) 250x200 mm dia |
| 65 | f) 315x250 mm dia |
| 66 | Providing & fitting fixing M.S flange (10mm thick) at site of work of approved quality.a) 150 mm. dia. |
| 67 | b) 125 mm. dia. |
| 68 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. a) 150 mm. dia. |
| 69 | b) 125 mm. dia. |
| 70 | Providing and fitting fixing of full threaded nut and bolt of approved quality as per direction of the Engineer-in-charge. |
| 71 | Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in- charge.a) 90 mm. Dia |
| 72 | b) 110 mm. Dia |
| 73 | c) 140 mm. Dia |
| 74 | d) 160 mm. Dia |
| 75 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge.a) 125 mm dia. (PN - 1.0) |
| 76 | b) 150 mm dia. (PN - 1.0) |
| 77 | c) 200 mm dia. (PN - 1.0) |
| 78 | Providing & fitting fixing C.I tail piece of approved quality at site of work.a) 150 mm. dia. |
| 79 | b) 125 mm. dia. |
| 80 | Repairing of spindle with nuts suitable for different dia existing sluice valve by filling metals to the corroded spindles and nut by welding, cutting, threading polishing and fitting fixing etc. complete at site of work as per of direction of Engineer-in-charge. a) 100 mm dia. |
| 81 | b) 125 mm dia. |
| 82 | c) 150 mm dia. |
| 83 | d) 200 mm dia. |
| 84 | e) 250 mm dia. |
| 85 | f) 300 m.m dia. |
| 86 | Supplying and fitting fixing of sluice valve spindle with nuts suitable for different dia existing sluice valve as per direction of the Engineer-in-charge.a) 100 mm dia. |
| 87 | b) 125 mm dia. |
| 88 | c) 150 mm dia. |
| 89 | d) 200 mm dia. |
| 90 | e) 250 mm dia. |
| 91 | f) 300 m.m dia. |
| 92 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - charge.A. External work.i) 150 mm dia. nominal bore. Please Enable Macros to View BoQ information |
