|
| 1 | Dismentalling of existing PVC pipe from underground including necessary earth cutting etc.and dismentalled pipes,couplers,tees,etc properly stacking in safe site as per CPWD Specification & direction of Engineer-in-charge. a) Pipes,cables etc exceeding 75 mm dia but not exceeding 315 mm dia. |
| 2 | Labour charge for laying different dia rigid UPVC pipes of Working Pressure 4.0 kg/ sq.cm. complete with necessary coupler and solvent cement joints.( pipes, coupler and solvent cement will be issued free of cost ) as per CPWD Specification & direction of Engineer-in-charge. (a) 90 mm dia. |
| 3 | (b) 110 mm dia. |
| 4 | (c) 140 mm dia. |
| 5 | (d) 160 mm dia. |
| 6 | (e) 200 mm dia. |
| 7 | (f) 250 mm dia. |
| 8 | (g) 315 mm dia. |
| 9 | Providing and fitting fixing of G.I hydrant suitable for PVC pipes as per standard specification complete as per direction of Engineer-incharge (Rate excluding the cost of NTP control valve). 80 X 50 mm dia |
| 10 | Providing and laying different dia rigid UPVC pipes of Working Pressure 4.0 kg/ sq.cm. complete with necessary coupler and solvent cement as per CPWD Specification & direction of Engineer-in-charge. (a) 90 mm dia. |
| 11 | (b) 110 mm dia. |
| 12 | (c) 140 mm dia. |
| 13 | (d) 160 mm dia. |
| 14 | (e) 200 mm dia. |
| 15 | (f) 250 mm dia. |
| 16 | (g) 315 mm dia. |
| 17 | Labour charge for repairing of leakage in existing UPVC distribution system including required earth cutting and fitting fixing of necessary coupler etc. complete and refilling the trench with available excavated earth as per direction of the Engineer-in-charge. (Payment of couplers, tees, reducers etc will be made separately). (a) 315 mm dia |
| 18 | (b) 250 mm dia to 110 mm dia. |
| 19 | (c) 90 mm dia. |
| 20 | Providing & fitting fixing rigid UPVC bend(30 degree,45 degree,60 degree, 90 degree) for UPVC pipes as per IS specification of Working pressure 4.0 kg/sq.cm as per CPWD Specification & direction of Engineer-in-charge. (a) 90 mm dia. |
| 21 | (b) 110 mm dia. |
| 22 | (c) 140 mm dia. |
| 23 | (d) 160 mm dia. |
| 24 | (e) 200 mm dia. |
| 25 | (f) 250 mm dia. |
| 26 | (g) 315 mm dia. |
| 27 | Providing and fitting fixing of different dia rigid UPVC equal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of Working pressure 4.0 kg/sq.cm confirmingto IS: 10124 (Part-V) as per CPWD Specification & direction of Engineer-in-charge. Equal Tee (a) 90 x 90 x 90 mm dia. |
| 28 | (b) 110 x 110 x 110 mm dia. |
| 29 | (c) 140 x 140 x 140 mm dia. |
| 30 | (d) 160 x 160 x 160 mm dia. |
| 31 | (e) 200 x 200 x 200 mm dia. |
| 32 | (f) 250 x 250 x 250 mm dia. |
| 33 | (g) 315 x 315 x 315 mm dia. |
| 34 | Providing and fitting fixing of different dia rigid UPVC unequal Tee (including earth cutting & backfilling all socketted) suitable for pipes as per IS specification of working pressure 4.0 kg/sq.cm confirming to IS: 10124 (part-V) as per CPWD Specification & direction of Engineerin- charge. Unequal Tee (a) 110 x 110 x 90 mm dia. |
| 35 | (b) 140 x 140 x 90 mm dia. |
| 36 | (c) 140 x 140 x 110 mm dia |
| 37 | (d) 160 x 160 x 90 mm dia. |
| 38 | (e) 160 x 160 x 110 mm dia |
| 39 | (f)160 x 160 x 140 mm dia |
| 40 | (g) 200 x 200 x 90 mm dia |
| 41 | (h) 200 x 200 x 110 mm dia. |
| 42 | (i) 200 x 200 x 140 mm dia. |
| 43 | (j) 200 x 200 x 160 mm dia |
| 44 | (k) 250 x 250 x 90 mm dia. |
| 45 | (l) 250 x 250 x 110 mm dia. |
| 46 | (m) 250 x 250 x 140 mm dia. |
| 47 | (n) 250 x 250 x 160 mm dia. |
| 48 | (o) 250 x 250 x 200 mm dia. |
| 49 | (p) 315 x 315 x 90 mm dia |
| 50 | (q) 315 x 315 x 110 mm dia |
| 51 | Providing and fitting fixing rigid UPVC Reducing socket (one size lower at one end, both end socketted suitable for pipes of Working pressure 4.0 kg/sq.cm. as per CPWD Specification & direction of Engineer-in-charge. (a) 110 x 90 mm dia. |
| 52 | (b) 140 x 110 mm dia. |
| 53 | (c) 160 x 140 mm dia |
| 54 | (d)200 x 160 mm dia. |
| 55 | (e) 250 x 200 mm dia |
| 56 | (f) 315 x 250 mm dia |
| 57 | Providing & fitting fixing C.I tail piece of approved quality at site of work. (a) 150 mm dia. |
| 58 | (b) 125 mm dia. |
| 59 | Providing & fitting fixing Rubber flange washer 6mm thick at site of work of approved quality. (a) 150 mm dia. |
| 60 | (b) 125 mm dia. |
| 61 | Providing & fitting fixing M.S flange (10mm thick) at site of work of approved quality. (i) 150 mm dia. |
| 62 | (ii) 125 mm dia. |
| 63 | Providing and fixing C.I. sluice valves ( with cap ) complete with bolts, nuts, rubber insertions etc. ( the tail pieces if required will be paid separately ) as per CPWD specification and direction of the Engineer - in - charge. (a) 125 mm dia.(PN-1.0) |
| 64 | (b) 150 mm dia.(PN-1.0) |
| 65 | (c) 200 mm dia.(PN-1.0) |
| 66 | Providing, fixing and laying fabricated UPVC end cap conforming to IS : 10124 ( Part 4 ) with solvent cement conforming to IS : 14182 including testing of joints complete as per CPWD specification and direction of the Engineer - in- charge. (a) 110 mm dia |
| 67 | (b) 140 mm dia. |
| 68 | (c) 160 mm dia. |
| 69 | Providing and fitting fixing of full threaded nut and bolt of approved quality as per direction of the Engineer-In-Charge. |
| 70 | Excavating trenches of required width for pipes, cables etc. including exacavation for sockets, dressing of sides where required, ramming of bottoms, depth minimum 1.25 m including getting out the excavated soil and backfilling of soil as required after laying of pipeline, in layers not exceeding 20 cm in depth including consolidating each deposited layer by ramming, watering etc. and disposing of surplus excavated soil with all required lead of 50 m as per CPWD specification and direction of the Engineer - in - Charge. All kinds of soil (a) Pipes, cables etc. exceeding 75 mm dia but not exceeding 160 mm dia. |
| 71 | (b) Pipes, cables etc. exceeding 200 mm dia but not exceeding 315 mm dia. |
| 72 | Providing and fitting fixing rigid UPVC socket (coupler) suitable for UPVC pipes as per IS specification coupler with ccement solvent. (a) 90 mm dia. |
| 73 | (b) 110 mm dia. |
| 74 | (c) 140 mm dia. |
| 75 | (d) 160 mm dia. |
| 76 | (e) 200 mm dia. |
| 77 | (f) 250 mm dia. |
| 78 | (g) 315 mm dia. |
| 79 | Suppliying and fitting fixing of sluice valve spindle with nuts suitable for different dia existing sluice valve as per direction of the Engineer-In-Charge. (a) 100 mm dia. |
| 80 | (b) 125 mm dia. |
| 81 | (c) 150 mm dia. |
| 82 | (d) 200 mm dia. |
| 83 | (e) 250 mm dia. |
| 84 | (f) 300 mm dia. |
| 85 | Repairing of spindle with nuts suiltable for different dia existing sluice valve by filling metals to the corroded spindles and nuts by welding, cutting, threading polishing and fitting fixing etc. complete at site of work as per direction of Engineer-In-Charge. (a) 100 mm dia. |
| 86 | (b) 125 mm dia. |
| 87 | (c) 150 mm dia. |
| 88 | (d) 200 mm dia. |
| 89 | (e) 250 mm dia. |
| 90 | (f) 300 mm dia. |
| 91 | Providing and fixing G.I. pipes medium class as per IS: 1239 with latest amendment complete with G.I. fittings including trenching and fefilling, cutting and making good the walls etc. complete as per CPWD specification and direction of Engineer-In-Charge. External Work. (i) 150 mm dia. Nominal bore. Please Enable Macros to View BoQ information |
