|
| 1 | Dismentalling of motor for vernishing, heating etc. complete in/c. reinstallation and making necessary electrical connection with main switch / starter with motor in/c trial run for 10 hrs in two spell complete as per direction of Engineer-in-charge. |
| 2 | Dismentaling of pump for over hauiling including greasing, gland packing, necessary repairs & reinstallation of the same including trial run for 10 hrs. in two spell complete as per direction of the Engineer-in-Charge.i) For L.I. |
| 3 | Supply & fitting fixing ball bearing of approved quality for pump required during overhauling. a) 6305 Ball bearing (TATA /SKF) |
| 4 | b) 6306 Ball bearing (TATA /SKF) |
| 5 | c) 6308 Ball bearing (TATA /SKF) |
| 6 | Providing & fitting fixing Shaft sleeve of approved quality. i) Cast iron (C.I.) |
| 7 | Providing & fitting fixing Shaft sleeve nut of approved quality. i) Cast iron (C.I.) |
| 8 | Providing & fitting fixing C.I coupling complete with nuts & bolts of approved quality. a) 150 mm dia. |
| 9 | Providing & fitting fixing PVC suction hose pipe overall thickness 5mm of best quality at site of work (Pankaj made) of approved quality. a) 150 mm dia. |
| 10 | Providing & fitting fixing MS hose clamp with nuts & bolts etc. complete at site of work of approved quality a) 150 mm dia. |
| 11 | Providing & fitting fixing C.I tail piece of approved quality at site of work. a) 150 mm dia. |
| 12 | Providing & fitting fixing C.I foot valve of heavy duty at site of work of approved quality. a) 150 mm dia. |
| 13 | Providing & fitting fixing C.I foot valve spare parts of 125/150 mm dia at site of work of approved quality. a) C.I foot valve Weight. |
| 14 | b) C.I foot valve Ring. |
| 15 | c) C.I foot valve Net. |
| 16 | Providing & fitting fixing foot valve leather washer (6 mm thick) of heavy duty at site of work of approved quality.A) 150 mm dia. |
| 17 | Providing and fitting fixing of C.I. gland of approved quality.A) For L.I. |
| 18 | Providing & fitting fixing gland nut/Stag Nut 100mm long for gland of approved quality.A) For L.I. |
| 19 | Providing and fitting fixing brass fullyway valve with handle in the G.I Pipe line including cutting threading etc complete, as per CPWD Specification and direction of the Engineer in charge. 40 mm dia |
| 20 | Providing and fixing G.I Bend / Elbow in the pipeline including testing of joints complete as per CPWD specification and direction of the Engineer in chargei) 40 mm dia |
| 21 | Providing and fixing G.I equal tee with the pipeline including testing of joints complete as per CPWD specification and direction of the Engineer in charge i) 40x40x40 mm dia |
| 22 | Providing and fixing G.I union as per CPWD Specification and direction of the Engineer in chargei) 40 mm dia. |
| 23 | Providing & fixing 900 G.I. bend of approved quality at site of work. a) 150 mm. dia. |
| 24 | b) 125 mm. dia. |
| 25 | Providing & fitting fixing M.S flange (10mm thick) at site of work of approved quality. a) 150 mm. dia. |
| 26 | b) 125 mm. dia. |
| 27 | Providing & fitting fixing Rubber flange washer 6 mm thick at site of work of approved quality. a) 150 mm. dia. |
| 28 | b) 125 mm. dia. |
| 29 | Providing and fitting fixing of full threaded nut and bolt of approved quality as per direction of the Engineer-in-charge. |
| 30 | Providing and laying of G.I. pipe with fittings complete as per direction of the Engineer-in-Charge. a) 40 mm. dia.(for priming line) |
| 31 | Repairing of OSCO starter including supplying & fixing of necessary spare parts as per direction of Engg-In-Charge. a) Stand finger |
| 32 | b) Gola finger |
| 33 | c) CT Coil |
| 34 | d) Magnet Coil |
| 35 | Supplying & fitting fixing manually operated oil immerged starter of approved quality a) 30 hp (OSCO/BCH Make) |
| 36 | Repairing of Main Switch in/c. supplying necessary Kit-cuts. a) 200 Amps |
| 37 | b) 63 Amps |
| 38 | Providing & fitting fixing Steel sheet enclosed switch Fuse unit (Suitable for DIN fuse) triple pole with Neutral Link (TPN) , 415/500 Volt, complete as per direction of Engineer-in-Charge. a) Current range 200 Amps. |
| 39 | b) Current range 63 Amps. |
| 40 | Supplying & fitting fixing kit cut for main & sub-main swich (Male & female) as per direction of the Engineer in Charge. a) 63 Amps main switch |
| 41 | b) 200 Amps main switch |
| 42 | Supplying and greasing/applying of grease of approved quality as per direction of Engineer-in-charge. |
| 43 | Supplying and fitting fixing of asbestos rope of best quality as per direciton of Engineer-in-charge.a) 10 to 12 mm thick |
| 44 | Supplying & filling of Transformer Oil in the oil tank of manually operated oil immerged starter of approved quality. |
| 45 | Providing and fitting fixing electronic timer type ET 100 of approved quality as per direction of the Engineer-in-charge. |
| 46 | Repairing of pump- shaft by welding, polishing etc. complete as per direction of the Engineer-in-Charge. |
| 47 | Providing & fitting fixing Pump Shaft of approved quality. |
| 48 | Supplying & fitting fixing of spare parts for 20/25 HP Horizontal motor. a) Motor Fan |
| 49 | b) Terminal Plate |
| 50 | Supplying & fitting fixing of PVC insulated Copper Wire with all electrical equipments including trial run etc. complete (ISI Marked) on the pannel board of approved quality.A) 7/16 Copper Wire.. |
| 51 | Supplying and fitting fixing AC Voltmeter (Moving Iron) on the panel board of approved quality. SMI-144, Range 0-400 to 0-500 |
| 52 | Supplying and fitting fixing AC Ammeter (Moving Iron) on the panel board of approved quality. SMI-144, Range 0-10A. |
| 53 | Supplying and fitting fixing of Indicator bulb (Flush type containig 3nos batton holder with bulb)) on the panel board of approved quality. |
| 54 | Providing & fitting fixing of pannel board of local teak wood for fitting & fixing of electrical items including 2 nos. MS angle post ( Size 50x50x6mm 2.80 Mtr. long) nuts& bolts etc. for errection of the same by 1 : 1.5 : 3 cement concreate casting (1feet x 1feet x 2feet) below the ground level and painting two or more coats of synthetic enamel paint on primer as per direction of Engg-in-Charge. Size 1.20 x 1.20 x 0.025 mtr. |
| 55 | Hiring charge of welding set of single phase with operating staff and carrying upto the site of work including loading and unloading (both way) complete as per direction of Engg-In-Charge. |
| 56 | Providing & fixing 200 Amps busbar of size 600 x 450 x 100 mm with 4 nos. copper strip of size 450 x 40 x 4 mm of approved quality. |
| 57 | Providing and Installation of Horizontal pump motor set (Centrifugal) with allied equipments by maintaining proper level/slope, alignment etc. in/c all necessary nuts & bolts, washers etc. at site of work and making necessary electrical connection with main switch / starter with motor in/c commissioning & trial run for 10hrs. in two spell as per direction of the Engineer-in-charge.a) 25 HP mortar with 60 LPS 22 m head pump |
| 58 | Providing and fixing G.I. pipes medim class as per IS : 1239 with latest amendment complete with G.I. fittings including trenching and refilling, cutting and making good the walls etc. complete as per CPWD specification and direction of the Engineer - in - chargeA. External work.a) 150 mm dia. nominal bore. |
| 59 | Providing and fixing C.I. non-return valve of approved quality as per of CPWD specification and direction of the Engineer - in - charge.a) 125 mm dia. Please Enable Macros to View BoQ information |
