|
| 1 | Earthwork in surface excavation not exceeding 30 cm depth(but exceeding 1.5 m width as well as 10 sq.m on plan) including disposal of excavated earth beyond work site for all leads lift disposed earth to be leveled and neatly dressed in: |
| 2 | Ordinary Soil |
| 3 | Supplying and filling in plinth under floors, trenches including watering ramming consolidating, dressing, complete. |
| 4 | Moorum |
| 5 | Preparation of Sub-grade by excavating earthwork in formed embankement/side shoulders to the following average depth of 22.5 cms, dressing to camber and consolidating with power road roller including making good the undulations etc and disposal of surplus earth with leadd upto 50 mts and lift upto 1.5 mts in ordinary or hard soil |
| 6 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation pipeline trenches drain (not exceeding 1.5 m in width or 10 sq.m. on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 m. |
| 7 | All kinds of soil |
| 8 | Supply and filling aggregate of size 20-10 mm in the pipeline and slit drain trenches |
| 9 | Supply and filling of fine river sand in the pipeline and slit drains |
| 10 | Sub Surface Drains with Perforated Pipe (Construction of subsurface drain with perforated pipe of 100 mm internal diameter of metal/ asbestos cement/ cement concrete/PVC, closely jointed, perforations ranging from 3 mm to 6 mm depending upon size of material surrounding the pipe, with 150 mm bedding below the pipe and 300 mm cushion above the pipe, cross section of excavation 450 x 550 mm. Excavated material to be utilised in roadway at site ) |
| 11 | GRASSING: Grassing with hybrid Bermuda : Includes supply of hybrid Bermuda TIFFWAY 419 sprigs and sprigging with the same with use of skilled and unskilled labour, cost of transportation, loading, unloading etc. This also includesm maintenance for 3 months till establishment of turf: The newly sprigged grass to be maintained till full establishment. Which includes cost of labour, watering, mowing 3 to 4 times a week , fuel, application of fertilizer, pesticides, weedicides, fungicides manual weeding, re -grassing wherever necessary, ground marking and cost of paint etc. This excludes the cost of water supply and electricity |
| 12 | Manually operated pop-up irrigation system with Hunterl Brand 5 i.25 Rotors, swing arms, PVC 6kg pipes,Control valves,presure valves, 7.5hp pump and other accessories as per details in Annexure 1 attached. |
| 13 | Barrier Netting behind both goals: Supply and installing vertical rectangular GI poles at every 6 meters distance at height 18 ft with 1.5 ft embedded in the ground with cement concrete including cost of fabrication , treatment with epoxy primer and paint finish. |
| 14 | FIFA standard Fixed Alluminium moulded Goal Posts with channel for net hooks,. Size L 20' B 7' D 6' and 5mm OD Pole thickness and 25mm net support poles |
| 15 | FIFA standard Moveabe Alluminium moulded Goal Posts with channel for net hooks,. Size L 20' B 7' D 6' and 5mm OD Pole thickness and 25mm net support poles and 8' pu wheels |
| 16 | Garware or equivalent FIFA Standard goal nets. Braided 4mm thickness |
| 17 | Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete. |
| 18 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing : |
| 19 | All works upto plinth level (Basketball Court) |
| 20 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge. |
| 21 | Laterite masonry in neatly dressed stones for 20 cms thick masonry walls in cm. 1 : 4 (1 cement : 4 coarse sand) in foundation upto plinth level |
| 22 | Supply and Installation of double layered Interlocking Wonder Tiles – Tile size - 1 ft x 1 ft. Thickness – 15.70 mm. Incl. of court markings. |
| 23 | Kerbs Locking System (Edge Border Patti – Male and Female) (0.05mX0.05m) |
| 24 | Supply and Installation of moveable and adjustable (8-10 ft) basketball poles (Koxton,Adom or other reputed brand) |
| 25 | Providing & laying cement concrete 1:3:6 (1cement : 3 coarse sand : 6 graded granitic orbasaltic stone aggrt. 40 mm. nominal size)excluding cost of centering, shuttering andfinishing in: |
| 26 | All works upto plinth level (For Ramp) |
| 27 | Providing and fixing G.I. chain link mesh 6.35cm x 6.35 cm x 10 gauge (2.5” x 2.5” x 10 gauge) fixed with angle iron posts and struts by G.I. or M.S. staples at 20cms apart with welding with the iron posts (placed at 3 meters centre to centre) including providing barbed wire stiffeners (shall weigh 9.33 kg. per 100 meters minimum) at top and bottom with barbed wire stiffers by binding wires at 50cms centre to centre complete as perthe direction of the Engineer – in – charge (angle iron posts struts, earthwork and concrete for fencing posts and struts to be paid separately) |
| 28 | Steel work welded (SAIL, TATA. VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only)in built up sections trusses and framed work including cutting, hoisting, fixing in position and applying priming coat of red lead paint. |
| 29 | In tees, angles, flats and channels |
| 30 | Chequered terrazo tiles 22 mm thick with marble chips of sizes upto 6 mm in floor on 25 mm thick bed of lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 coarse sand ) jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and polishing completed. |
| 31 | Dark shade using ordinary cement. |
| 32 | Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc.with hairline finish, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) Please Enable Macros to View BoQ information |
