|
| 1 | SUPPLY OF BALL VALVES-FIRE SAFE-CSS FOR AG & UG PIPING (R04 BOM) FOR MSB, PFCC, GDS, FF FOR NREP PROJECT including TPI charges as specified in Material Requisition. |
| 2 | BALL VALVE SS DUAL, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2\\" TO, 11/2\\"AND SINGLE REDUCED BORE FOR 2\\" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE1 10.5 KG/CM2(G), DESIGN TEMPERATURE1 65 DEG.C, DESIGN PRESSURE2 18 KG/CM2(G), DESIGN TEMPERATURE2 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 3 | BALL VALVE SS DUAL, 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2\\" TO, 11/2\\"AND SINGLE REDUCED BORE FOR 2\\" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 4 | SUPPLY OF BALL VALVES-FIRE SAFE-CSS FOR AG & UG PIPING (R04 BOM) FOR MSB, PFCC, GDS, FF FOR NREP PROJECT including TPI charges as specified in Material Requisition. |
| 5 | BALL VALVE SS DUAL, 150,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2\\" TO, 11/2\\"AND SINGLE REDUCED BORE FOR 2\\" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE1 10.5 KG/CM2(G), DESIGN TEMPERATURE1 65 DEG.C, DESIGN PRESSURE2 18 KG/CM2(G), DESIGN TEMPERATURE2 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% |
| 6 | BALL VALVE SS DUAL, 300,0, API 608, FLGD,B16.5,RF, LO, FULL BORE, BB, FIRE SAFE, LONG PATTERN, WITH LOCKING ARRANGEMENT, A182F304/L A351CF3/M, A182 F316 /A351 CF8M, STEM SS 316, RTFE, SEAL FLEXIBLE GRAPHITE, A193 Gr.B7/A194Gr.2H, SPRINGS INCONEL X-750, SUPP. REQUIREMENTS, VALVE BORE SHALL BE FULL BORE FOR 1/2\\" TO, 11/2\\"AND SINGLE REDUCED BORE FOR 2\\" & ABOVE, SHALL BE A182 Gr.F304/304L OR, A351 Gr.CF3/CF8, ADD. INFORMATION, DOCUMENTS TO BE FOLLOWED, TK-1ZZZA-PI-SPE-0005,TK-1ZZZA-PI-SPE-0006,, TK-1ZZZA-PI-SPE-0008,TK-1ZZZA-PI-SPE-0009, AND IN-042, VENDOR TO SUBMIT PRESSURE-TEMP., RATING CHART, DESIGN PRESSURE 12 KG/CM2(G), DESIGN TEMPERATURE 65 DEG.C, VALVE SHALL HAVE 120MM EXTENDED SPINDLE, (MEASURED FROM THE VALVE BONNET) TO ENSURE, THAT THE LEVER CLEARS VALVE INSULATION., FOR TRUNNION MOUNTED VALVES SEALANT /, LUBRICANT / FLUSHING INJECTION S, ASSEMBLIES SHALL BE PROVIDED FOR THE, AND OR STEM SEAL. REFER CLAUSE B.5.16 OF, TK-1ZZZA-PI-SPE-0009., VALVE SHALL BE SUITABLE FOR, BI-DIRECTIONAL FLOW & PRESSURE SHUTOFF, VALVE SHALL BE TESTED IN PREFERRED AND, NON PREFERRED FLOW DIRECTION., PREFERRED FLOW DIRECTION SHALL BE MARKED., SHALL BE DUAL CERTIFIED AND THE, MAXIMUM CARBON CONTENT SHALL BE 0.03% Please Enable Macros to View BoQ information |
