|
| 1 | Civil work |
| 2 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 3 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 15.12.1 Of area 3 sq. metres and below |
| 4 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 5 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 15.23.1 Ceramic |
| 6 | Dismantling C.I. or asbestos rain water pipe with fittings and clampsincluding stacking the material within 50 metres lead : 75 to 80 mm dia pipe |
| 7 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : 15 mm to 40 mm nominal bore |
| 8 | Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 9 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 10 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 insuperstructure above plinth level up to floor V level in all shapes and sizes in : 6.4.1 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc.(9mm/10mm square bar) |
| 12 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 9.97.4 150x10 mm |
| 13 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) |
| 14 | Providing and fixing cupboard shutter with 19mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer- in-charge.(Payment of providing and fixing auto closing hinges shall be paid separately) |
| 15 | Providing and fixing 19mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in-charge. |
| 16 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm |
| 17 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in- charge. |
| 18 | 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 19 | 15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 fine sand) |
| 20 | 20 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) |
| 21 | Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In- Charge. |
| 22 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 23 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(Preferred brands-Asian / Birla/JK) |
| 24 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (Preferred brands-Asian paint , Birla, Berger) |
| 25 | Providing and fixing Ist quality 12mm ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(Size of Tile 300x300 mm)(Preferred brands-Kajariya/Somani/Johnsons) |
| 26 | Providing and laying 12mm Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (Preferred brands-Kajariya/Somani/Johnsons) |
| 27 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 28 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid |
| 29 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with apair of 15 mm C.P. brass pillar taps |
| 30 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete. |
| 31 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Make-Finolex/Prince pipe or equivallent grade) Concealed work, including cutting chases and making good the walls etc. (Make-Finolex/Prince/supreme pipe) 18.8.1 15 mm nominal outer dia Pipes |
| 32 | 18.8.2 20 mm nominal outer dia Pipes |
| 33 | Cutting holes up to 30x30 cm in walls including making good the same:With common burnt clay F.P.S. (non modular) bricks |
| 34 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints,,clamping complete as per direction of Engineer in Charge. (Make-Finolex/Prince/supreme pipe )External work 18.9.1 15 mm nominal dia Pipes |
| 35 | 18.9.2 20 mm nominal dia Pipes |
| 36 | 18.9.4 32 mm nominal dia Pipess |
| 37 | 18.9.5 40 mm nominal dia Pipes |
| 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 75 mm diameter (Prince/Finolex/Astral or equivalent) |
| 39 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Coupler75 mm |
| 40 | Single tee with door,75x75x75 mm |
| 41 | Bend 87.5°, 75 mm bend |
| 42 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : Brass Fittings 18.17.1A 20 mm nominal bore |
| 43 | 18.17.3 40 mm nominal bore |
| 44 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore |
| 45 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter |
| 46 | Providing and fixing brass stop cock of approved quality : 15 mm nominal bore |
| 47 | 20 mm nominal bore |
| 48 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. |
| 49 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 50 | Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of requiredsize,approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.Granite stone slab of colour black, cherry/Ruby Red Area of slab upto 0.50 sqm. |
| 51 | Area of slab over 0.50 sqm |
| 52 | Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of28 days to be not less than 30 N/ mm2). 12 mm average thickness |
| 53 | 25 mm average thickness in 2 layers. |
| 54 | 50 mm average thickness in 3 layers. |
| 55 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 56 | Providing and fixing hand rail of approved size(50mm dia) by welding etc. to steel ladder railing, balcony railing, staircase railing,parapet railing and similar works, including applying priming coat of approved steel primer. M.S. hollow Circular pipe |
| 57 | Providing & fixing 3-track, 3-shutter aluminium sliding window using Jindal aluminium sections (30mm x 50mm x 1.5mm thick), with 10–15 micron anodized finish coating. The window shall include 5mm thick plain glass (approved shade) of approved make (Saint-Gobain / Asahi), integrated mosquito mesh, EPDM gaskets, 6mm wool pile, steel body roller bearings, and all necessary hardware accessories including adequate size concealed locking system (metal/plastic body, star-lock type), complete in all respects. |
| 58 | Providing & fixing 4-track, 4-shutter aluminium sliding window using Jindal aluminium sections (30mm x 50mm x 1.5mm thick), with 10–15 micron anodized finish coating. The window shall include 5mm thick plain glass (approved shade) of approved make (Saint-Gobain / Asahi), integrated mosquito mesh, EPDM gaskets, 6mm wool pile, steel body roller bearings, and all necessary hardware accessories including adequate size concealed locking system (metal/plastic body, star-lock type), complete in all respects. |
| 59 | Providing and fixing anodised aluminium adjustable louvers with 4.00 thick froasted glass with necessary screws, fittings etc. all complete |
| 60 | Labour work:Applying one coat of cement primer of approved brand and manufacture on wall surface. (Note: Primer will be supplied by the Institute) |
| 61 | Labour work: Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade . Two or more coats (Note: Paint will be supplied by the Institute) |
| 62 | Labour work: Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (Note: Paint will be supplied by the Institute) |
| 63 | Providing and fixing PVC Nahani trap/floor trap of 100 mm inlet and 75 mm outlet (weighing 5.80kg each) joining with lead with connection pipes , placing as per the drawing , embedding in cement concrete 1:2:4 and making circular hole up to floor level using 100mm outer dia PVC of 6kgs/sqcm pressure and fixing 1no 120 m dia C.P. Brass grating, complete all upto exterior pipes/connection complete specifications and drawings and as directed at site. |
| 64 | Providing, fixing and jointing 100 mm diameter PVC SWR (Soil, Waste & Rainwater) pipe, conforming to IS: 13592, Type B, including all specials such as bends, tees, offsets, clamps, and necessary fittings. The pipe shall be fixed with approved quality MS galvanised clamps at required intervals, making proper leak-proof joints with rubber ring / solvent cement as applicable, cutting and making good the wall/floor wherever required, testing for leakage, and completing all work as per engineer-in-charge instructions. |
| 65 | Providing and fixing one side polished cuddapah stone in cement mortar 1:3 (1 cement : 3 coarse sand) 20mm thick |
| 66 | Providing and fixing CP brass jet spray (health faucet) of approved make, including 1.0–1.2 m flexible CP hose, holder, screws, washers, and all required fittings such as CP brass angle valve, wall flange, nipples, and teflon tape, complete. The jet spray shall be fixed firmly to the wall in the desired position, tested for proper water pressure and leak-proof performance, and completed as per the directions of the Engineer-in-Charge. |
| 67 | Providing and fixing CP brass 2-way bib cock, Seiko make, heavy-duty quality, including all fittings such as CP flange, teflon tape, brass nipples, washers, etc. The bib cock shall be fixed in the correct position, aligned properly, tested for leak-proof performance, and completed as per the directions of the Engineer-in-Charge. |
| 68 | Providing and Fixing CP‑Brass Mixer Tap of approved brand including supply, installation and making good — complete with all necessary fittings, accessories and final testing. |
| 69 | Providing and placing in position non-shrink cementitious Micro concrete M-40 ‘Renderoc RG’ or equivalent for repair of damaged reinforced concrete elements by adding clean water in required quantity as specified in manufacturer specifications to make a free flowing non-shrink repair micro-concrete all compete as per the direction of engineer-in-charge. |
| 70 | Providing, erecting, maintaining, and dismantling single bamboo scaffolding for construction, repair, or maintenance works such as sanitary, water supply, roofing, painting, plastering, or other related works up to Five floor levels (approximately 16-20 m height). |
| 71 | Providing and fixing heavy duty cast iron or UPVC manhole / chamber cover and frame of size 1.00 × 0.52 metre, conforming to relevant IS specifications, including embedding the frame in cement concrete (1:2:4) nominal mix, complete in all respects as per direction of Engineer-in-Charge. |
| 72 | Providing repair works to door including plane the wood, new hinges,latches,grip handle and other minor items where necessary for proper functioning all complete as per directions. Please Enable Macros to View BoQ information |
