|
| 1 | M&L for complete servicing and repairs of split type Air-conditioner 1.5/2.0 Ton capacity including taking down of air-conditioner. Servicing complete, cleaning of evaporating coil, condensor coil with CTC, blower, blower motor base tray, drain hole, cleaning of poly-propelene pad, oiling to fan/blower motor, checking of wiring connections, terminals, capacitors, relay, selector switches, thermostat etc and refixing the same in position and testing complete all as directed by Engineer-in-charge. |
| 2 | M&L for complete servicing and repairs of window type air conditioner 1.5 Ton capacity including taking down of air conditioner. Servicing complete, cleaning of evaporating coil. Condenser coil with CTC, Blower, Blower motor, base tray, drain hole, cleaning of filter pad, oiling fan/ blower motor, checking of wiring connection, terminals, capacitors relay, selector switches, thermostat etc. and refixing the same in position and testing complete all as directed by Engineer-in-charge. |
| 3 | Replacement of base tray of window type A/C 1.5/ 2.0 Ton capacity unit including the following :- (i) Removing of compressor, condenser, wiring kit from base tray. (ii) Fixing of new base tray having all fitting/ fixture to accommodate all accessories made out of MS sheet 2.0mm thick duly painted. (iii) Refixing of compressor, condenser coil, copper tubes by brazing etc. (iv) Carrying out the nitrogen pressure testing of whole system & holding the nitrogen pressure for 24 hour. (v) Carrying out the vacuumising & gas charging to unit. Gas will be measured & paid separately. |
| 4 | M&L for shifting of window type AC 1.5 TR cap any make as directed by Engineer-in-charge including making hole, arresting air leakages and connecting and testing including making good disturbed surfaces. Note :- Refrigerant will be measured and paid separately. |
| 5 | M&L for shifting of split type AC upto 1.5/2 TR as directed by Engineer-in-charge including making hole, arresting air leakages, connecting and brazing copper pipe and insulation and connecting and testing including making good disturbed surfaces. Note :- Refrigerant will be measured and paid separately. |
| 6 | M&L for dismantling and replacement of hermatic sealed compressor factor reconditioned single phase electrically operated on 230V, suitable for the following :-(a) 1.5TR capacity window/ split AC |
| 7 | M&L for dismantling and replacement of hermatic sealed compressor factor reconditioned single phase electrically operated on 230V, suitable for the following :-(b) 2 TR capacity window/ Split ACNote :- (i) All replacement of failed compressors shall accompained by the certificate from the original compressor manufacturer to the effect that the said compressor has been repaired by their authorised service centre and warrenty of not less than one year from the date of repair shall be provided. (ii) Cost is deemed to include carrying out the vacuumising, nitrogen pressure test for 24 Hrs & gas charging to unit. Gas will be measured & paid separately. Make - Shriram/ Tecumesh/ Kirloskar/ Voltas. |
| 8 | S&F in replacement auto cut thermostat for window/Split type AC of any capacity. |
| 9 | S&F in replacement of overload protectors for the following :-(a) Window type AC of any capacity, any model and any make |
| 10 | S&F in replacement of overload protectors for the following :-(b) Split type AC of any capacity, any model and any make |
| 11 | S&F in repalcement of relay suitable for window type AC of any capacity, model and make. |
| 12 | S&F in replacement of relay suitable for split type AC of any capacity, model and make. |
| 13 | S&F in replacement of selector switch for window type AC of suitable for any capacity, model and make. |
| 14 | S&F in replacement of air filter pad for window/ split type AC of any capacity, type, model and make. |
| 15 | S&F in replacement of filter pad/ wood wool net for desert/ air cooler of any capacity, type, model and make. |
| 16 | (a) Capacitor 4 Mfd |
| 17 | S&F in replacement of capacitor of following capacity of Make :- Usha/ Siemens/Asian/ EPCOS(b) Capacitor 6.3 Mfd |
| 18 | S&F in replacement of capacitor of following capacity of Make :- Usha/ Siemens/Asian/ EPCOS(c) Capacitor 36/45 Mfd |
| 19 | M&L for dismantling blower/ condensor fan motor. Rewinding and repairs of blower/ condensor fan motor with supper enameld copper wire of suitable gauge, applying proper thickness of insulation paper and varnish, heating to required temperature to obtaine suitable insulation level reassembling and fixing back in position for the following :-(a) Blower fan motor (Two speed i.e. low and high for window tye AC 1.5 TR capacity) |
| 20 | M&L for dismantling blower/ condensor fan motor. Rewinding and repairs of blower/ condensor fan motor with supper enameld copper wire of suitable gauge, applying proper thickness of insulation paper and varnish, heating to required temperature to obtaine suitable insulation level reassembling and fixing back in position for the following :-(b) Condensor fan motor for split type AC of capacity 1.5 TR |
| 21 | M&L for dismantling blower/ condensor fan motor. Rewinding and repairs of blower/ condensor fan motor with supper enameld copper wire of suitable gauge, applying proper thickness of insulation paper and varnish, heating to required temperature to obtaine suitable insulation level reassembling and fixing back in position for the following :-(c) Blower fan motor for split type AC of capacity 1.5 TR |
| 22 | M&L for dismantling blower/ condensor fan motor. Rewinding and repairs of blower/ condensor fan motor with supper enameld copper wire of suitable gauge, applying proper thickness of insulation paper and varnish, heating to required temperature to obtaine suitable insulation level reassembling and fixing back in position for the following :-(d) Condensor fan motor for split type AC of capacity 2 TR |
| 23 | M&L for dismantling blower/ condensor fan motor. Rewinding and repairs of blower/ condensor fan motor with supper enameld copper wire of suitable gauge, applying proper thickness of insulation paper and varnish, heating to required temperature to obtaine suitable insulation level reassembling and fixing back in position for the following :-(e) Blower fan motor for split type AC of capacity 2 TR |
| 24 | S&F foundation rubber bushes for compressor of window type/ Split type AC of any capacity and size. |
| 25 | M&L for charging of R-22 refrigerant gas of approved make. |
| 26 | M&L for charging of R-32 refrigerant gas of approved make |
| 27 | M&L for charging of R-410a refrigerant gas of approved make.Note for Item no. 17,18 & 19 :- (i) Charged weight of gas is to be measured. (ii) Cost to be inclusive of vaccumising and nitrogen test pressure for 24 Hrs. and gas charging to unit. |
| 28 | S&F in replacement of 1/4\\" copper pipe including all bending, flairing and connecting all as per site requirement. |
| 29 | S&F in replacement of 1/2\\" copper pipe including all bending, flairing and connecting all as per site requirement. |
| 30 | S&F in replacement of 1/4\\" insulation pipe made out of PUF all as directed by Eng-in-charge. |
| 31 | S&F in replacement of 3/8\\" insulation pipe made out of PUF all as directed by Eng-in-charge. |
| 32 | S&F in replacement of 3/8\\" insulation pipe made out of PUF all as directed by Eng-in-charge. |
| 33 | S&F in replacement of capillary copper tube for window/ Split type AC and water cooler of any capacity, model, type and make all as directed by Eng-in-charge. |
| 34 | S&F in replacement of compressor valves suitable for split type AC of any capacity, model, type, of following size :-(a) 1/2\\" bore |
| 35 | S&F in replacement of compressor valves suitable for split type AC of any capacity, model, type, of following size :-(b) 3/8\\" bore |
| 36 | S&F in replacement of compressor valves suitable for split type AC of any capacity, model, type, of following size :-(c) 5/8\\" bore |
| 37 | S&F in replacement of compressor valves suitable for split type AC of any capacity, model, type, of following size :-(d) 1/4\\" bore |
| 38 | S&F in replacement of PVC drain pipe 20mm suitable for split type AC of any capacity/ model/ type and make including clamping on wall/ floor/ roof all as directed by Eng-in-charge. |
| 39 | S&F in replacement of fan blade of condensor unit of window/ split type AC of any capacity, type, model and make all as directed by Eng-in-charge. |
| 40 | S&F in replacement of outer casing for window type AC of any capacity, type, model and make all as directed by Eng-in-charge. |
| 41 | S&F in replacement of grill for window type AC of any capacity, type, model and make all as directed by Eng-in-charge. |
| 42 | S&F in replacement of condensing coil of 1.5TR capacity split type AC of any make, type and model all as directed. |
| 43 | S&F in replacement of evaporating coil of 1.5 TR capacity split type AC of any make, type and model all as directed |
| 44 | S&F in replacement of condensing coil of 2TR capacity split type AC of any make, type and model all as directed. |
| 45 | S&F in replacement of evaporating coil of 2 TR capacity split type AC of any make, type and model all as directed |
| 46 | S&F in replacement of blower motor suitable for 1.5TR window type AC of any make, model and type all as directed by Eng-in-charge. |
| 47 | S&F in replacement of blower motor suitable for 1.5TR split type AC of any make, model and type all as directed by Eng-in-charge. |
| 48 | S&F in replacement of blower motor suitable for 2TR split type AC of any make, model and type all as directed by Eng-in-charge. |
| 49 | S&F in replacement of industrial type plug and socket in sheet steel enclosure AC box including 20Amps Single pole MCB all as directed by Eng-in-charge. Make - Standard/ L&T/ Havell's/ Siemens/ Indo Asian |
| 50 | S&F in replacement of invertor universal PCB suitable for 1.5/2 TR split tpe AC of any make, model and type all as directed by Eng-in-charge. Please Enable Macros to View BoQ information |
