|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: MILITARY ENGINEERING SERVICES (GE (SOUTH) UDHAMPUR) NAME OF WORK : PROVN OF APPROACH PATHWAY TO MERCURY POST AND ALUMINIUM WINDOWS, DOORS, RENOVATION TO TOILET & ALLIED INFRA TO BLDG NO P-2 AND OTHER SANCTION WORKS UNDER GE (SOUTH) UDHAMPUR Contract No: CA NO : GE/S(U)-32/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Ser.No. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT TOTAL AMOUNT In Words |
| 2 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4 sqm each and removing complete all as specified and directed. |
| 4 | Taking down cement plaster on brick or stone masonry wall etc incl racking out joints haking for key, scrubbing down with water etc as in external surfaces of man holes, septic tank, filter bed etc incl removing of debries complete all as specified and directed. |
| 5 | Taking down of GI tubing 15mm dia complete all as specified and directed. |
| 6 | Taking down of GI tubing 20mm dia complete all as specified and directed. |
| 7 | Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all asspecified and directed. |
| 8 | Taking down main switches, distribution boards and cut outs etc. of any type and capacity along with the existing boards and removing the same from site and making good the disturbed surface/portion of walls complete all as specified and directed By Engr-in-Charge. |
| 9 | Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified and directed. |
| 10 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 11 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 12 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 13 | Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework complete all as specified and directed by Engr-in-charge. |
| 14 | Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 15 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and directed. |
| 16 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering complete all as specified and directed by Engr-in-Charge. |
| 17 | Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sqm on plan and getting out in soft/loose soil, complete all as specified and directed. |
| 18 | Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in soft/loose soil etc complete all as specified and directed. |
| 19 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed. |
| 20 | Removing excavated soils n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed. |
| 21 | M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 22 | M & L for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 23 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x600x7mm thick laid over 10 mm thick screed bed in CM 1:4,set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed. |
| 24 | M&L PCC 1:2:4 type B0 (12.5mm graded aggregate) as in coping, benching and similar work etc including necessary form work complete all as specified and directed. |
| 25 | M&L hardcore of broken bricks gauge exc 63mm but n.exc 100mm deposited, spread and levelled in layers n.exc 15cm thick, watered and rolled /rammed to true surfaces complete all as specified and directed. |
| 26 | M&L for 75 mm thick PCC type C-2 1:3:6 , using 40mm graded crushed stone aggregate as in sub base for receiving floor finishes finished even and fair complete all specified and directed. |
| 27 | M&L for coloured chequered cement concrete tiles 30cmx30cmx2.5cm ,machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and pigments laid over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 28 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 29 | Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(20mm graded crushed stone aggregate), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and directed. |
| 30 | S&F Anodised aluminium door shutters with frame powder coating of any colour (Thickness or powder coating not less than 50 micron) , aluminium section weighing 0.55 kg/m including with suitable locking arrangement with lock (Make: Godrej) 4 lever, 5.5mm thick tinted glass, 5mm thick aluminium push plate, hydraulic door closer-01 No, pivot with standard floor spring and pivot on top frame, aluminium tower bolts 300 mm long-01 No, glazing clips, rubber packing for locking purpose with aluminium snap beading screws, handles 2 Nos in each door, hinges, etc. complete all as specified and directed. |
| 31 | S&F Powder coated (50 micron of approved colour) Aluminium anodised shutter window (glazed or wire gauge) fixed type or sliding with aluminium window frame or chowkat 1.50 mm thick sheet & section aluminium anodised of size 100 mm x 44.50 mm and window shutter frames made of (middle, top rail, bottom) and styles 1.5 mm thick aluminium anodised sheet & section of size 44.5 x 44.5 mm including all fittings such as rubber gasket aluminium glazing clips locking cabinet and 75 mm handle and including 4 mm thick tinted glass pane in panes glazed shutter fixed with rubber gasket and glazing clip/aluminium beads and with stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel staples on gauge shutter including aluminium grills all accessories complete all as specified and directed. |
| 32 | S&F Anodised aluminium window and ventilator shutters with chowkat, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed |
| 33 | M & L 18-20 mm thick granite (of any type) work( table rubbed and polished) in steps, jambs, pillars, window sills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite slab complete all as specified and directed. |
| 34 | M & L for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified. |
| 35 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick laid over 10 mm thick screed bed in CM 1:4,set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. |
| 36 | M & L Vitrified tiles light Shade 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified. |
| 37 | M & L Vitrified tiles light Shade 8-10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces as in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 38 | M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement all as specified and directed |
| 39 | M & L Rendering 10 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement all as specified and directed |
| 40 | S&F mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed . |
| 41 | S&F counter top vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete. Make : Jaquar Make :KUS-WHT-35601 or its equivalent in Hindware/Cera |
| 42 | S&F 5 mm thick looking mirror of required size, fixed on walls with dash fasteners and chromium plated screws purposefully made to fix the glass by drilling hole in the glass complete all as specified and directed. |
| 43 | S&F Water closet single piece pattern coloured of size 370x695x795 mm as approved and complete all as specified and directed by Engr-in-Charge . Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera |
| 44 | S&F 15 mm dia WHB mixer/wall mixer chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. Make - Jaquar Cat No KUP-35011BPM or equivalent in Hindware/Cera |
| 45 | S&F 15 mm bore CP Bib tap complete all as specified and directed. Make : Jaquar Cat Part No CON 107KN and equivalent in CERA. |
| 46 | S&F 15 mm dia Angle valves/ stop cock, fancy type and chromium plated screwed down high-pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. Make - Jaquar Cat No KUP-35053PM or equivalent in Hindware/Cera |
| 47 | S&F Health faucet ABS body with wall hook and 1 mtr chrome plated PVC hose pipe complete all as specified and directed. Make : Jaquar and equivalent . |
| 48 | S&F chromium plated toilet paper holder complete all as specified and directed. Make : Jaquar Cat Part No ACN 1153N and equivalent in CERA. |
| 49 | S & F 125mm chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed. |
| 50 | S&F 600 mm long brass chromium plated towel rail fancy type complete all as specified and directed. Make : Jaquar Cat Part No ACN-1111NM and equivalent in CERA. |
| 51 | S&F soap dish complete all as specified and directed. Make : Jaquar Cat Part No ACN 1131N and equivalent in CERA. |
| 52 | S&F sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed |
| 53 | S&F PVC connection 15 mm dia and 600mm long with two Nos of brass check nuts and washers complete all as specified and directed. |
| 54 | S&F 15mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls complete all as specified and directed. |
| 55 | S&F 20mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls complete all as specified and directed. |
| 56 | S&F PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement and making good all as specified and directed |
| 57 | S&F 110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall or in trenches complete all as specified and directed. |
| 58 | S&F 110 mm PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 59 | S&F 110 mm PVC (SWR) branch piece, (signal T) equal or unequal with access door complete all as specified and directed |
| 60 | M & L for applying 1 mm thick layer of wall putty on walls to give uniform surface, surface scrubbed with emery paper and make surface good and clean complete all as specified and directed. |
| 61 | M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed. |
| 62 | M & L for preparation of new plaster surfaces of walls/ceiling and applying two coats of oil emulsion distemper (white/tinted) all as specified and directed. |
| 63 | M&L for 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 64 | M & L for non skid ceramic tiles 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 65 | M&L for rendering 10mm thick as backing coat in CM 1:4 complete all as specified and directed |
| 66 | M & L for Glazed Coloured Ceramic tiles in vertical surface 300x450x7mm thick and pointed in white or colour cement to match complete all as specified and directed. |
| 67 | M&L for brick work with sub class 'B' bricks exc 6m mean radius straight or curved on plan built in cement mortar 1:6 complete all as specified and directed. |
| 68 | S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube suppling and fixing in opening as per specification & drawing complete all as specified and directed. |
| 69 | S & F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm thick plain colour PVC sheet on back face, fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 70 | S&F Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, typeB-11 100 mm long complete all as specified and directed. |
| 71 | S&F 150 mm long mild steel barrel tower bolt of extruded section complete all as specified and directed. |
| 72 | S&F 150 mm length mild steel handles fabricated type anodised complete all as specified and directed. |
| 73 | M & L Rendering 10 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement all as specified and directed |
| 74 | S&F solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site including all fixing accessories like PVC frames/fillets etc on PVC frame, complete all as specified and directed. |
| 75 | S&F in repairs counter top vitreous chinaware wash hand basin (WHB) white size 550mm x 400mm complete including 32 mm dia chromium plated waste coupling, PVC waste pipe and cutting for pinning in ends of brackets in wall etc complete. Make : Jaquar Make :KUS-WHT-35601 or its equivalent in Hindware/Cera |
| 76 | S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete in all respect all as specified. approved and complete all as specified and directed by Engr-in-Charge . Make : Jaquar Cat part No KUS-WHT-35851S300UF or equivalent in Hindware/Cera |
| 77 | S&F 15 mm bore CP Bib tap complete all as specified and directed. Make : Jaquar Cat Part No CON 107KN and equivalent in CERA. |
| 78 | S&F in repair Vitreous china half stall urinal (back or corner wall type) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement fixing flush Pipe, grating & union for discharge Pipe complete all as specified and directed. |
| 79 | S&F Concussive push button taps of cast copper alloy, screwed for iron pipe and fixed complete all as specified and directed. |
| 80 | S&F urinal spreader of CP for fixing with 15mm dia pipe (minimum weight 60 gms) complete all as specified and directed. |
| 81 | S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall or in trenches complete all as specified and directed. |
| 82 | S&F 75mm PVC (SWR) bends any radius complete all as specified and as directed. |
| 83 | S&F 75mm PVC (SWR) branch piece, (signal T) equal or unequal complete all as specified and ;as directed |
| 84 | M & L for providing 75 mm thick cement concrete ( 1:4:8) type D2 using 20 mm graded aggregate as in sub base for hard paved area all as specified and directed. |
| 85 | M & L Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement all as specified and directed |
| 86 | M & L for applying 3mm thick layer of wall putty on walls to give uniform surface, surface scrubed with emery paper and make surface good and clean complete all as specified and directed. |
| 87 | S&F Wall cladding tiles n exc 1.0 Sqm stone series on exterior wall surface design and size as approved by Engr in Charge as in vertical surfaces of walls, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified anddirected |
| 88 | S&F 0.50mm thick prepainted galvalume aluminium zinc coated GI based semi corrugated/profile steel sheeting of any colour, having tensile strength of 550MPA as in roof covering, wall cladding with self tapping screws or 'L' type of 'J' type or cranked hook bolts in lieu of screws as per manufacturers instructions, complete all as specified and directed. |
| 89 | M&L for 75mm thick Plain cement concrete type B-2, 1:3:6 (40mm graded stone aggregate) finishing cement concrete surface even and smooth by using extra cement etc complete,all as specified and directed. |
| 90 | M & L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with mixture of white and grey cement in equal proportion & no pigments including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 91 | Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLSH copper conductor cables (multistranded) PVC insulated and unsheathed in and including PVC concealed conduit pipe as per site requirement (size not less than 20mm dia), medium grade with Modular sunken boxes & PVC/metal back plate for mounting modular type switches, sockets & regulators etc with cover plate modular type including supplying and laying PVC insulated and stranded unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire connected to earth dolly including cutting of chases in wall /ceiling etc and making good the disturbed surfaces match to existing with cement mortar and putty white /colour wash complete all as specified and directed . Make: Havells/ Finolex/ Polycab. |
| 92 | All as per item no 90 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on an independent board. |
| 93 | All as per item no 90 above but cable 2.5 sqmm FRLSH for one 3/5 pin 6 Amp socket outlet point on the same board with other switch. |
| 94 | All as per item no 90 above but for one bell/buzzer point controlled by one bell push single pole one way . |
| 95 | All as per item no 90 above but for one 3/6 pin 16 amps socket outlet point on an independent board with cables of size 2.50 sqmm. |
| 96 | All as per item no 90 above but an independent board with cables of size 4.0sqmm. |
| 97 | S&F for modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 98 | S&F for modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with outer/inner cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 99 | S&F for modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with outer cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 100 | S&F for modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with outer/inner cover complete all as specified and directed by Engr In charge.Make:Legrand/Havell crabtree/L &T |
| 101 | S&F in replacement ceiling rose, 3 terminal, PVC/ Polycarbonate, insulated body, surface bakelite sheet 63.50mm dia complete all as specified and directed. |
| 102 | S&F in replacement electronic step type fan regulator 100 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and directed. Make: Havells Crabtree/ Legrand/ Indoasian. |
| 103 | S&F in replacement sheet metal enclosure for MCB DB double door type, single pole and neutral 12 way 240Volts with 200 Amps rated bus bar of suitable size plate and common neutral link, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way complete all as specified and directed. |
| 104 | Supply and fixing in replacement 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 Amp current carrying capacity in the MCB DB complete with connection testing and commissioning. |
| 105 | S&F in replacement MCB Single Pole, 6 to 32 Amps 240 volts, 10KA breaking capacity, convenient to 'C' Curve complete all as specified and directed. |
| 106 | S& F in replacement LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed. |
| 107 | S & F in repairs LED wall mounting Decorative bed side wall light fixture made up of Polycarbonate, suitable for 9 W retrofit LeD Lamp B22 base with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete Make: Philips /Bajaj/Havells |
| 108 | S & F in repairs LED panel decorative down light fitting recess mounted/surface mounted square type white/ warm white 2X2 36W with high out put diffuser 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and directed. .Make: Philips /Bajaj/Havells |
| 109 | Supply and fixing LED luminaire 12 watt, 220 V AC recess/surface mounted downlighter type with high efficiency PC diffuser soft light and symmentrical illumination complete with driver, holders & LED lamp warm white suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.Make- Havells/ Philips/C&S. |
| 110 | S&F of decorative wall mounting 1X9W fixture with frosted glass along with 9W warm white bulb GLS lamp luminaire complete all as specified and directed by Engineer-in-Charge. |
| 111 | S & F Exhaust fan made of sturdy Engineering plastic body complete voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm with louver shutters all as specified and direceted by Engr-in-charge. Make:Havells/Bajaj/CG. |
| 112 | M&L PVC insulated (unsheathed) 03 core multistranded cable copper conductor round FRLSH of size 1.5 Sqmm suitable upto 1100 volts all as specified and directed by Engr-In-Charge. |
| 113 | S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 6 Sqmm nominal cross sectional area and one run of 6 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia 'medium grade' PVC concealed conduits and fittings, complete all as specified and directed.NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire Make: Havells / Finolex / Polycab. |
| 114 | Supply and fixing wall fan complete with blades accessories, 230 V, 400 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE.Five star rated all as specified and directed by Engr-In-Charge. |
| 115 | All as per Srl item No 90 but for 3/5 Pin 16 Amps socket outlet independent board with cable 4.00 Sq mm FRLSH including copper PVC insulated PVC unsheathed 4.00 sq mm earth wire standard and connected to earth dolly. |
| 116 | S&F Sheet metal enclosure double door type for DBs (when MCB to be used) 8 way 240 volts with Suitable rated busbar and neutral link including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification complete all as specified and directed. Make: Schneider/ Legrand/L&T |
| 117 | S & F MCB Single pole and neutral 240 volt any rating from 40 amps\\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed. Make: Schneider/ Legrand/L&T |
| 118 | Supply, installation, testing and commissioning of 200mm sweep exhaust fan, BLDC motor operated, suitable for wall mounting in toilet, complete with all accessories as specified below:Sweep Size:200 mm ,Motor Type: BLDC motor, Power Consumption: Approx 6–8 WattsSpeed: Approx 2000 RPM Input Supply: 220–240 Volts AC, 50 HzNoise Level: Low noise type Body: High grade ABS / Polycarbonate body, glossy finishBlades: Aerodynamically designed plastic bladesMounting: Suitable for wall mounting with round cut-out approx. 200-220mmSafety: Inbuilt thermal overload protectionProtection: IPX4 Warranty: Minimum 2 years Note- Quoted rates Including cutting of wall, making good damages, fixing with screws, connection with existing wiring, providing PVC flexible pipe if required, testing and commissioning complete in all respects all as specified and directed by Engr-in-charge. Make:Atomberg/Havells/Bajaj |
| 119 | Supply, installation, testing and commissioning of Storage Type Electric Water Heater (Geyser) 25 Litre capacity, suitable for bathroom use, complete with all accessories as specified below:Capacity: 25 LitresType: Instantaneous / Mini storage typePower Rating: 2 kW (approx.) Input Supply: 230 Volts AC, 50 Hz, Single PhaseHeating Element: Heavy duty copper / glass coated heating elementTank: Pressure type inner tank with anti-corrosion coatingBody: ABS / Rust proof outer body Working Pressure: min 6–8 barSafety Features:Inbuilt thermostat,Thermal cut-out,Multi-function safety valve,Pressure relief valve,IP Protection: IPX4 or better,Mounting: Wall mounted type,Warranty: Minimum 2 years on product and on tankMake: Havells / Bajaj / Crompton / V-Guard / AO Smith Note:- Quoted rate Includes providing and fixing necessary inlet and outlet connections PVC Pipes , CP brass nipples, connection to existing water supply line, connection to electrical point, testing and commissioning complete all as specified and directed by Engr-In-Charge. |
| 120 | S& F LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed.Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / Crompton / Bajaj Note:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 121 | S & F in repairs LED wall mounting mirror type white/ warm white pitcture light fitting with high out put diffuser 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete Make: Philips /Bajaj/Havells |
| 122 | Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete |
| 123 | S& F LED tube light fittings of 20 wattage including rawl/plug ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed to wall firmly , complete all as specified and directed.Rated Wattage: 20 WattsType: Integrated LED Tube Light fitting (4 feet)Input Voltage: 220–240 Volts AC, 50 HzLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current electronic driver, BIS approvedHousing: Aluminium extruded body with opal diffuserMounting: Surface / Batten typeProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / Crompton / Bajaj Note:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 124 | Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete with all accessories as specified below :- Rated Wattage: 36 Watts SizeSize: 600mm x 600mmInput Voltage: 220–240 Volts AC, 50 HzType: Edge-lit / Back-lit LED panel, slim designLuminous Efficacy: Minimum 100 lumens per wattColour Temperature (CCT): Cool White (6500K) / Neutral White (4000K) as specifiedPower Factor: ≥ 0.95THD: ≤ 10%Driver: Inbuilt constant current LED driver, BIS approvedBody: Powder coated CRCA sheet / Aluminium housingDiffuser: High transmission opal acrylic / polycarbonate diffuserProtection: IP20 or betterLife Span: Minimum 50,000 burning hoursWarranty: Minimum 2 yearsMake: Philips / Wipro / Havells / CromptonNote:- Quoated rate includes cutting of false ceiling if required, making good damages, connection with existing wiring, earthing, testing and commissioning complete in all respects. |
| 125 | Sheet metal enclosure Single pole & neutral with 2 pin and earth plug and socket 20A 240 complete with one single pole MCB of any cap from 10 to 20 A complete all as specified and directed. Make- Havells/Anchor/Legrand |
| 126 | S&F Sheet metal enclosure double door type for MCCB VTPN DB upto 250 Amps, 4 way vertical type 415 volts with suitable rated busbar and neutral link , fixing DB and making good distributed surfaces to match with existing specification complete all as specified and directed. |
| 127 | S & F MCCB 4 Polel capacity of 160 amps 415 volts rupturing capacity 16 KA complete all as specified and directed. |
| 128 | S & F MCB single pole & Neutral 240 volt any rating from 32 Amps \\"C\\" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and directed by Engr-in-Charge. |
| 129 | S & F Single pole and neutral enclosure 240V ,20A with a two pin and earth plug and socket for AC complete with one single pole MCB complete all as specified and directed. |
| 130 | S&F sub main wiring with two single core FRLSH PVC insulated unsheathed multistranded copper conductor of size 2x 4 Sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area FRLSH PVC insulated unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including 25 mm dia 'medium grade' PVC concealed conduits and fittings, complete all as specified and directed.NOTE: One unit length shall measured as two run of main wire and one run of conduit & earth wire |
| 131 | Supply, installation, testing and commissioning of high wall split type air conditioner unit of make O General/ LG/Daikin suitable for indoor and outdoor installation, having cooling capacity of 1.5 Ton , 5 Star Rated complete with the following : Indoor Unit: High wall mounted type with elegant design, low noise operation, equipped with cordless remote control, digital display, auto swing, sleep mode, timer function, and cooling & heating operation (heat pump type). Air Quality Features: Unit provided with inbuilt air ionizer and plasma/anti-bacterial filter for improved indoor air quality. Outdoor Unit: Suitable for wall/roof mounting, complete with hermetically sealed compressor, condenser coil, fan, and weatherproof housing.Refrigerant & Piping:Complete with required copper refrigerant piping (insulated) of suitable size from indoor unit to outdoor unit approx 15 RM with flare fittings, valves, and accessories as per manufacturer standards no any extra payment shall be done for copper piping Electrical Work: Including 3-core copper power cable, control cable, interconnections between indoor and outdoor units, earthing provision, and all necessary electrical accessories. Drainage System: Providing and fixing PVC drain pipe of suitable size for condensate water disposal with proper slope including Drain pump with sensor auto on off features shall be installed by Contractor Mounting Arrangement: Indoor unit mounted on wall with suitable brackets; outdoor unit fixed on MS stand / wall mounting brackets with anti-vibration pads, including bolting, clamping, and supports. Installation & Commissioning: Including vacuuming, gas charging (if required), testing for leakages, trial run, and handing over in complete working condition all as directed and specified by Engr-In-Charge. |
| 132 | Supply and fix Voltage Stablizer for automatic operation single phase with time delay relay with by pass button naturally air cooled indoor type & designed for input variation between 170V to 250V (Low voltage cut off below 170 Volts and high voltage cut off at 250 Volts) with output voltage bstablized at 230 V with accuracy of + 2.5% and of capacity 5.0 KVA including andf necessory electrical connections all as specified and directed. |
| 133 | Supply and fix copper tubing including brazing and lead testing alongwith insulation of any size as required for fixing of split AC of capacity 2.0 ton complete all as specified and directed by Engr-In-Charge. |
| 134 | M&L for Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1 using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle, 20mm bore light grade GI watering pipe with funnel, charcoal & salt and 1 Bags of Benzonite powder weights 25Kg. including excavation and earth work in any type of soil complete all as shown in electrical plate No 3 connected to main control board all as specified and directed testing on completion. Note: On completion of earthing contractor should check earthing results and submit the test report to engr-in-charge.The test result should be less than 1 ohm, if desired results are not obtained then earthing shall be redone by the contractor at his own cost. Total in Figures 0.0 0.0 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
