|
| 1 | Removing the excavated materials, debris of any description and any other waste materials, spoil heaps including loading into trucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at the earmarked places etc. complete upto 1km lead. |
| 2 | Earthwork in Excavation over areas in all kinds of soil ( exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan),including disposal of excavated earth within a lead of 50 mtrs and lift upto 1.5m, disposed earth to be levelled and neatly dressed. |
| 3 | Back filling with available excavated earth (excluding rocks) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 Mtr and lift up-to 1.5 Mtr. |
| 4 | Providing and laying plain cement concrete 1:2:4 (1 Cement: 2 Coarse sand: 4 Graded stone aggregates of 20mm nominal size) at all depths below and upto plinth level in foundations, footings, non-suspended floors including tamping, curing etc. but excluding the cost of centering and shuttering etc. as specified or directed in any shape, position, thickness and finishing the top surface rough or smooth etc. all complete. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 5 | Providing and laying Reinforced Cement Concrete works up to Plinth level with RCC grade 1:1 1/2:3 (1 Cement : 1 1/2 sand: 3 graded stone aggregates of 20mm nominal size) with graded stone aggregates of 20mm nominal size at slabs, roofs, stair cases, landing slabs, canopies, chajjas, bends, lintels, columns, walls, beams, lofts, projections, manhole covers, gully trap covers, valve chambers etc. as per drawing, specification and direction of the Engineer-in-charge at all heights and depths including vibration for consolidation, curing etc. complete excluding cost of centering and shuttering & steel reinforcement. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 6 | Providing and laying Reinforced Cement Concrete works above Plinth level with RCC grade 1:1 1/2:3 (1 Cement : 1 1/2 sand: 3 graded stone aggregates of 20mm nominal size) with graded stone aggregates of 20mm nominal size at slabs, roofs, stair cases, landing slabs, canopies, chajjas, bends, lintels, columns, walls, beams, lofts, projections, manhole covers, gully trap covers, valve chambers etc. as per drawing, specification and direction of the Engineer-in-charge at all heights and depths including vibration for consolidation, curing etc. complete excluding cost of centering and shuttering & steel reinforcement. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 7 | Centering and shuttering including struting, propping etc. for foundations, footings, bases of columns, etc. for mass concrete and removal of form for foundations, footings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all depth as directed by Engineer-in-charge. |
| 8 | Centering and shuttering including struting, propping etc. for retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etcfootings, columns, suspended floors, roofs, landings, shelves, lintels, beams, chajjas, girders, bressumers, cantilevers, pillers, posts, struts and stair cases and types of RCC work at all depth as directed by Engineer-in-charge. |
| 9 | Bending / Binding and placing in position reinforcement for all type of RCC work at all height and depths, carting / transport them form store/issue points to site of work, straightening, bending, binding to required shape and size as per details, including supplying and binding with soft annealed binding wire and placing with proper cover blocks, supports, etc all complete. (REINFORCEMENT STEEL SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 10 | Fabrication/ modification etc. including erection of Structural Steel work true to level and alignment as per instruction of Engineer-in-Charge ,including all materials,transporting to workshop,transporting to site, as per requirement for all types of structural steel/all types of doors/shuttrs/all types of windows/all types of ventilators, work including red oxide primer and all tools, tackles, consumables, supervision etc. at all height and locations etc. all complete as per direction of Engineer-in-Charge. (All the materials are in the scope of contractor) |
| 11 | Providing and laying 12mm thick cement plaster in cement mortar (1 cemnt : 6 fine sand) using approved sand including curing etc. all complete for all height. ( CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 12 | Providing and laying 15mm thick cement plaster in cement mortar 1:6 ( 1 cement : 6 fine sand ) on the rough sides of single or half brick wall or masonary work using approved type of sand including curing etc all complete for all height. (CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 13 | Finishing walls New / old work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) with Acrylic Smooth exterior paint of required shade : |
| 14 | Finishing walls Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface with Acrylic Smooth exterior paint of required shade : |
| 15 | Painting two or more coats on new work with synthetic enamel paint of approved brand and manufacture to give an even shade : |
| 16 | Demolishing Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 17 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 18 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 19 | Demolishing brick work in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. |
| 20 | Demolishing stone rubble masonry in cement mortar manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge : |
| 21 | Brick work with fly ash bricks in ccement mortar 1:6 (1 cement : 6 coarse sand) at any shape including curing, etc. complete in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and Plinth. ( CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE / ISSUE POINT) |
| 22 | 12.1.1 Providing corrugated G.S. sheet roofing/PPGL sheet including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.60 mm thick with zinc coating not less than 275 gm/m² (ALL MATERIALS ARE IN THE SCOPE OF THE CONTRACTOR) |
| 23 | Removing the excavated materials, debris of any description and any other waste materials, spoil heaps including loading into trucks/tractors using baskets by head load or any other means and transporting by trucks/tractors and unloading at the earmarked places etc. complete upto 1km leads. |
| 24 | Earthwork in Excavation over areas in all kinds of soil ( exceeding 30 cm in depth,1.5m in width as well as 10 sqm on plan),including disposal of excavated earth within a lead of 50 mtrs and lift upto 1.5m, disposed earth to be levelled and neatly dressed. |
| 25 | Back filling with available excavated earth (excluding rocks) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 Mtr and lift up-to 1.5 Mtr. |
| 26 | Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m. All kinds of soil |
| 27 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.) |
| 28 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.) |
| 29 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.) |
| 30 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) (CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE.) |
| 31 | Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases of columns, etc as directed by Engineer-in-Charge. |
| 32 | Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Suspended floors, roofs, landings, balconies and access platform as directed by Engineer-in-Charge. |
| 33 | Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Lintels, beams, plinth beams, girders, bressumers and cantilevers as directed by Engineer-in-Charge. |
| 34 | Providing ,Centering and shuttering including strutting, propping etc. and removal of form work for Columns, Pillars, Piers, Abutments, Posts and Struts as directed by Engineer-in-Charge. |
| 35 | Bending/binding Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.(REINFORCEMENT STEEL/TOR STEEL SHALL BE ISSUED FREE OF COST AT NALCO's STORE) , Hot rolled deformed bars |
| 36 | Brick work with fly ash bricks in Cement mortar 1:6 (1 cement : 6 coarse sand) at any shape including curing, etc. complete in cement mortar 1:6 ( 1 cement : 6 coarse sand) in foundation and Plinth. ( CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE / ISSUE POINT) |
| 37 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 38 | Providing and fixing 18 mm thick Granite, gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels all complete as per direction of Engineer-In-Charge. |
| 39 | Providing Sal wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). |
| 40 | Providing and fixing ISI marked 35 mm thick flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including ISI marked Stainless Steel butt hinges with necessary screws all complete as per direction of Engineer-In-Charge. |
| 41 | Providing and fixing M.S. Frames/ grills of required pattern in frames of Door/ windows etc. with M.S. Angles flats, square or round bars etc. including priming coat with approved steel primer all complete. ( Fixed to steel windows by welding or gouting into wall all complete as per direction of Engineer-In-Charge. |
| 42 | Providing and fixing ISI marked oxidised CP BRASS. sliding door bolts :300x16 mm size with nuts and screws etc. complete complete as per the direction of E-I-C. |
| 43 | Providing and fixing ISI marked oxidised CP BRASS tower bolt :250x10 mm size black finish, with necessary screws etc. complete as per the direction of E-I-C . |
| 44 | Providing and fixing IS : 12817 marked stainless steel butt hinges 100X58X1.90 mm size with stainless steel screws etc. complete as per the direction of E-I-C. |
| 45 | Providing and fixing aluminium sliding door bolts, ISI marked anodised, transparent or dyed to required colour or shade, with nuts and screws etc. complete as direction of E-I-C : Size 300x16 mm |
| 46 | Providing and fixing aluminium sliding door bolts, ISI marked anodised transparent or dyed to required colour or shade, with nuts and screws etc. complete as direction of E-I-C , transparent or dyed to required colour or shade, with nuts and screws etc. complete :Size 250x16 mm |
| 47 | Providing and fixing aluminium tower bolts, ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C : Size 300x10 mm |
| 48 | Providing and fixing aluminium handles, ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etc. complete as per direction of E-I-C : Size 125 mm. |
| 49 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ( STRUCTURAL STEEL SHALL BE PROCURED BY THE CONTACTOR) |
| 50 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm |
| 51 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes as per IS 13592, including jointing with seal ring , leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter |
| 52 | Providing corrugated G.S. sheet roofing/PPGL sheet including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.60 mm thick with zinc coating not less than 275 gm/m² (ALL MATERIALS ARE IN THE SCOPE OF THE CONTRACTOR) |
| 53 | Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with G.I / polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\" ) as specified (ALL MATERIALS ARE IN THE SCOPE OF THE CONTRACTOR) |
| 54 | Providing and laying 12mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 55 | Providing and laying 15mm thick cement plaster in cement mortar 1:6 (1cement: 6sand) on the rough sides of single or half brick wall or masonary work using approved type sand including curing etc. all complete for all heights.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE) |
| 56 | Providing and applying white cement based putty of average thickness1 mm, of approved brand and manufacturer, over the plastered wallsurface to prepare the surface even and smooth complete (PREMIUM QULAITY OF SNOWCEM, BERGER OR ASIAN PAINTS OR EQUIVALENT) |
| 57 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer (PREMIUM QULAITY OF SNOWCEM, BERGER OR ASIAN PAINTS OR EQUIVALENT) |
| 58 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer (PREMIUM QULAITY OF SNOWCEM, BERGER OR ASIAN PAINTS OR EQUIVALENT) |
| 59 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (PREMIUM QULAITY OF SNOWCEM, BERGER OR ASIAN PAINTS OR EQUIVALENT) |
| 60 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per directionof Engineer - in - charge Nominal concrete 1:3:6 or leaner mix (i/c equivalent design mix) |
| 61 | Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge :In cement mortar |
| 62 | Providing and laying dry stone pitching / boulder soling 225mm thick with approved granite stone including filling the sand in gaps & watering (for boulder soling) including preparing the surface as per the direction of the Engineer-In-charge. |
| 63 | Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 64 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 65 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 66 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.5 mm thickness |
| 67 | Providing and laying Vitrified wall tiles of approved make (H & R Johnson / Nitco / orient / somany / Kajaria or equivalent), fullbody / Double charge / Rustic / Glossy / Matt finish / theme based wall tiles in different sizes of 10.5 mm thickness, with water absorption less than 0.08 % and conforming to I.S. 15622, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness,including grouting of joints. Size of Tile 600x600 mm |
| 68 | Providing and fixing tiled false ceiling with GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/sqm, both side inclusive) consisting of main \\"T\\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross \\"T\\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \\"T\\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \\"T\\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \\"T\\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. |
| 69 | Providing and iaying vinyl flooring of 4.5 mm thickness Please Enable Macros to View BoQ information |
