|
| 1 | Desilting To Source WellDewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete.By using 5 to 9 HP Pump |
| 2 | Desilting the supply well of water supply works etc. in wet or dry condition including lifts up to 9 m and iead 150 M as required beyond the work site, stacking, sreeading, including necessary guarding, etc complete, as directed by Engineer-in-charge |
| 3 | 7.5BHP Submersible pumps Providing erecting and giving test of submersibleto confirmng to IS 8034 and motor confirmingto IS 9283 with waterproof winding pump shall be suitable for various head and discharge with stainless steel shaft . Motor suitable for working 415 V +/- 10 % 3 ph 5o Hz A C supply with cable guard etc complete -3.00 BHP Submersible pumps – 1No. |
| 4 | Supplying and erection G.I. Pipe of following dia. And class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbing with Sockets and necessary material etc. complete.65mm dia. G.I. Pipe (Heavy class) 630.00 + (127.00+10%) |
| 5 | Supplying and erection GI pipe of B- Class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbing with Sockets and necessary material etc. complete.50 mm dia G.I.Bend.(262.00 +2%) +(42.00+20%) |
| 6 | 50 mm dia G.I.Tee (473.00 +2% ) + (42.00 +20% ) |
| 7 | Supplying and erecting flat flexible 3 core 4.0 sq.mm PVC sheathed A) submersible type copper cable 3 Core – 2.50Sqmm. |
| 8 | B) Aluminium Conductor PVC armoured 4 core cable 4 sqmm |
| 9 | Providing & supplying & jointing ISI mark CIDF Reflux (NRV) Valve including, railway fright, inspection charges, unloading from railway wagon .Loading in to truck, transport to the departmental store / site of work, Unloading, stacking etc. complete 65 mm dia. Reflux valve PN-1 grade. |
| 10 | providing double flange sluice valve confirming for IS 14846 including worn gear arrangement asper pressuer , stainless steel65 mm dia. Sluice valve PN-1 grade |
| 11 | Lowering , Laying and Jointing in position following C.I.D/F Reflex valve and sluice valve |
| 12 | Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc |
| 13 | Supplying an erecting cast iron earthplate 60 X 60 X 0.6 cm. buried in specifically prepared earth pit( top edge of of plate 1.5 m. below ground level ) refilling with 30.00kg charcole and salt in alternate layers , necessary length of double earth strip connection to the plate with cadminium plate GI nutbolts 12 mm dia with bituminious compound connected to the nearest switchgear with end socket as per direction and duly tested by earth tester and recording the results supplying and erecting and erecting 19 mm dia vertical gi pipe 1.5 M long with funnel and mesh at top is included in the scope of work. Plate type electrod. |
| 14 | Supplying and erecting metal work in CRCA sheet including Iron work for cutting bending welding , treated with antitrust treatment and duly powder coated or painted withone coat of lead paint and 2 coat paint complete |
| 15 | Supplying and erecting marine plywood 12 mm thick for panel board |
| 16 | Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB ... upto 100 Amp |
| 17 | Point wiring for light/ fan/bell consealed type in min 20 mm PVC conduit with 1.5 sq.mm FR grade copper wires, modular type swich and socket, earthing required accessaries .etc complete. |
| 18 | 5.00 BHP Solar pumpSupplying, installing, testing and commissioning of solar waterpump of 5 HP capacity, DC submersible type (with controller)100800 LPD/ 67200LPD/ 45600LPD, total head of 50m/70m/100m, comprising of 4800Wp/ 4800Wp/ 4800Wp/ PV arrayrespectively mounted on GI structure with necessary hardware with 5years on site performance warrantee. Specification no. ESD-SWPS 5.00 BHP Solar pump |
| 19 | Tracker Fancing with Gate :- A) Providing and erecting 1.5 metre high wire fencing with seven rows ofbarbed wire supported on M.S.Angles ( 50mm x 50mm x 6mm) at 2.5Metres, Center to center including excavating pits for foundqtion,fixing post in cement cocnrete 1:4:8 of size 45 x 45 x 45 cm fasteningthe wire and painting the M.S.Angles with one coat of red lead primer and two coats of painting etc.complete. |
| 20 | Providing and fixing mild steel grill gate with angle iron frame 65mm x65mm x 10mm with iron bars at 150mm C/C and diagonal flats as perthe detaileddrawing including hinges, pivot block locking arrangement,welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kg/Smt. |
| 21 | Rapairs to Switch RoomRemoving the existing cement plaster of any thickness without causing dust and nuisance and stacking the debris upto a distance of 50 m and spreading in compound and cleaning the site etc complete . |
| 22 | Removing doors and window with frame and stacking the materials as directed with al leads , lift etc complete. |
| 23 | Providing & fixing rolling steel shutter fabricated from 18/19 gauges steel laths with side guides, bottom rail, brackets, door suspension shaft, including rolling springs, locking arrangement & housing box at the top with one coat of red lead primer etc complete. |
| 24 | Providing & fixing steel window of various sizes as per detailed drawing with welded square bar 12 mm at 10 cm centre to centre hot dip zinc coating without / with ventilators including fabrication, glazing with non-acetinic / plain / obscured glass panels of approved type & quality, all fixtyres & fastening without teak wood boxing & architraves & finishing with one coat of primer complete. |
| 25 | Providing & laying in situ cement concrete in M-150 (1:2:4 ) grade of trap / granite / quartzite / gneiss metal for foundations & bedding including bailing out water manually, formwork, compaction & curing, etc complete. |
| 26 | Providing sand face plaster externally in two coats using approved screened sand in all positions, including providing base coat of 15 mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kilogramme / 50 kg of cement and curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment 8 mm thick in cement mortar 1:4 and finishing the surface by taking out grains and curing for 14 days including preparing the surface, watering and scaffolding etc. complete. |
| 27 | Providing cement plaster 12mm thick in two coats in cement mortar 1:4 with neeru finish etc complete. |
| 28 | Providing flush grooved pointing with cement mortar 1:3 to stone masonary including scaffolding & curing etc complete. |
| 29 | Providing structural steel work in rolled section ,like joist, , channel, angle , tee etc as per detailed design and drawing incluidng fixing in position without connnecting plate |
| 30 | Providing and fixing 6.00 mm thick ISI mark asbestos cement corrugated sheet roofing including galv.iron hook , bollt etc complete |
| 31 | Providing and applying two coat of waterproof cement paint of approved manufacture and colour to the plastered surface, including scaffolding preparing the surface, watering for two days etc. complete. |
| 32 | Providing & applying washable oil distemper paint of approved manufacture & colour to the plastered surface, including scaffolding preparing the surface watering for two days complete. |
| 33 | Pressure Sand Filter Providing and installing Pressure sand Filter cylender type as per design and drawing with standby by contractor. water filter as per daily demand specified in estimate and also simple gravity feed disinfection arrengement with TCL powder solution on the percolation well / service reservior including solution tank fedding pipe dosing arrengement all other accessaries giving trail and test etc complete. (Daily water demand- 38000 Litre, Discharge Pumping -8333 per hr) Note:- A Lump sum Amount of Pressure Sand Filter with TCL Doser has been taken in the estimate. However, the payment will be passed as per the Quatation approved by zilla parishad. |
| 34 | Distribution SystemDismantling dead pipeline of M.S/R.C.C/C.I/P.S.C and /A.C/P.V.C/H.D.P.E Pipe including cost necessary excavation and refilling of trencher ,breaking and joint ,lifting the pipes and stackingA) For G.I /A.C/PVC/S.W/H.D.P.EPipe diameter less than 80 mm dia. |
| 35 | Excavation for foundation / pipe trenches in earth soil of all types, sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M |
| 36 | Excavation for foundation / pipe trenches in hard murum and boulders including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 37 | Excavation for foundation / pipe trenches in soft rock by controlled blasting, including trimming & leveling the bed by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 38 | Filling in plinth and floors / trenches murum bedding with approved murum from excavated materials from foundation in in 15 to 20 cm. layers including watering, compaction etc. complete. |
| 39 | Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 /13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays &rains, excluding GST levied by GI & GOM in all respect etc. complete.90 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 40 | 75 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 41 | 63 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 42 | Providing & Supplying G.I.Specials etc complete65 mm dia. G.I. SpecialsBend |
| 43 | 75 mm dia. G.I. SpecialsBend |
| 44 | Lowering , laying & jointing with HDPE/ G.I. pipes and specials of following class and dia. including conveyance from stores to site of work, all labour, giving satisfacyory hydraulic test , etc. complete either underground or in verticle position , H. D. P. E./ M.D.P.E. pipes in proper position including all specials by compression fitting/ electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by Engineer-In-Charge.90 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 45 | 75 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 46 | 63 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 47 | Providing double flanges Sluice Valve conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,inl. All taxes transportation etc. complete50 mm dia. S.V.( PN-1) |
| 48 | 65 mm dia. S.V.( PN-1) |
| 49 | 80 mm dia. S.V.( PN-1) |
| 50 | Lowering & laying and jointing in position following CIDF/Refluxe valve,Butterfly valve and Sluice valve incl. cost of all labour jointing material incl. nuts bolts and giving satisfactory hydraulic tesing etc complete.50 mm dia. S.V. (PN-1) |
| 51 | 65 mm dia. S.V.( PN-1) |
| 52 | 80 mm dia. S.V.( PN-1) |
| 53 | Providing & constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding , B.B. masonry in C.M. 1:5 proportion, precast R.C.C. frame & cover etc. complete..As above of 60 x 45 cm internal size and depth upto0.9M with precast R.C.C. slab cover. |
| 54 | Providing and laying in situ Plain Cement concrete in proportion M-150 of trap metal for foundation & bedding, including out water manually, form work, capacity & caring etc…… complete... |
| 55 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 56 | Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour , UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mmA) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul)for HDPE & PVC pipe For MDPE/UPVC Pipe SerFor MDPE/UPVC Pipe Service Connection on Disribution main For 15 mm Service connection(With Road Crossing) For 15 mm Service connection |
| 57 | (Without Road Crossing) For 15 mm Service connection |
| 58 | Repair To RCC ESRProviding waterproof plaster in W.C. and bath 12mm thick for dado in cement mortar 1:3 with neat finishing, floating using water proofing compound at the rate of 1Kilogram. per bag of cement of approved make and manufacturer and curing etc. complete. (Excluding Tiles) (As directed by Engineer in Charge) |
| 59 | Providing and applying two coat of waterproof cement paint of approved manufacture and colour to the plastered surface, including scaffolding preparing the surface, watering for two days etc. complete. |
| 60 | Providing and applying two coats of synthetic enamel paint of approved colour to new/old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. |
| 61 | Providing & fixing in position of M.S.Ladder 0.50M wide consisting of 75 x 10 mm M.S.flats as strigers and 16mm dia. M.S.bars in double rowsas steps placed at 25cm c/c including cost of materials & labour involved, welding, ancharing and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge. etc complete. |
| 62 | Providing and fixing G.I. pipe railing having 1.0 M height consisting 50 x 50 x 6 mm thick M.S. angles as verticals at 1.5 M c/c and additional posts at every corner with 3 rows of 25 mm dia G.I. pipes of medium class variety as horizontal and painting 3 coats of oil paint over 1 coat of anticorrosive paint of approved colour andshade including cost of all labour, transporting bends to curved shape, etc. complete. |
| 63 | Providing, hoisting and fixing in position C.I. manhole, frame and cover of best quality and of required size and shape with locking arrangements including applying 2 coats of anti-corrosive paint, etc. complete.90 x 60 cm size and weight 35 kg. |
| 64 | Providing Supplying lowering ,laying and Jointing ISI mark G.I. lowering ,laying and Jointing pipe of following class anddia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores,etc.complete asper IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.80 mm dia. G.I.Pipe (Heavy class) -10.30 kg/m |
| 65 | 80 mm dia. G.I.Pipe (Heavy class) - 10.30 kg/m |
| 66 | Providing double flanges Sluice Valve conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,inl. All taxes transportation etc. complete 80 mm dia. Sluice valve PN-1 |
| 67 | 80 mm dia. Sluice valve PN-1 |
| 68 | Providing & Making Name plate on ESR structure with oil paint etc complete.2.00 m x 1.00 m size Please Enable Macros to View BoQ information |
