|
| 1 | Repairs to Source WellExcavation in general in earth, soils of all types, sand, gravels and soft murum, including removing the excaveted material upto a distance of 50 m and lift as below, stacking and spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling,etc. complete. |
| 2 | Providing dry trap / granite / quartzite / gneiss rubble stone solling in 15 to 20 cm thick layers including hand packing & compaction etc. complete including all leads |
| 3 | Providing & laying in situ (M10) grade of trap /granite/quartzite/gneiss metal of foundation & bedding including bailing out water, form work, compaction, curing etc complete. |
| 4 | Providing un coursed rubble masonary of trap stones in cm 1:6 in foundation & plinth of inner wall, including bailing out water manually, striking out joints on unexposed faces & watering etc complete. |
| 5 | Providing and laying in situ Cement Concrete M-15 of trap/ granite / quartzite / gneiss metal for foundation and bedding including bailing out water, form work, compaction, curing, etc. complete. |
| 6 | Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) |
| 7 | Providing flush grooved pointing with cement mortar 1:3 to stone masonary including scaffolding & curing etc complete. |
| 8 | Dewatering the excavated trenches and pools of water in the building trenches / pipeline trenches, well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel), etc. complete. |
| 9 | Desilting the supply well of water supply works etc. in wet or dry condition including lifts up to 9 m and iead 150 M as required beyond the work site, stacking, sreeading, including necessary guarding, etc complete, as directed by Engineer-in-charge |
| 10 | Providing structural steel work in rolled sections like joists, channels, angles, tees etc. as per detailed designs and drawing or as directed by Engineer-in-charge including cutting, fabrication, hoisting & erecting fixing in position with connecting plates, braces etc. and one coat of anticorrosive paint and over it two coat of oil paintings of approved quality and shade complete. |
| 11 | विंधणकाम (वाहतुकईसह.) (माती/मुरुमाच्या भूस्तरात 150 मी.मी. व्यासाची रिमिंग विंधणकाम व पक्क्या पाषाणात 115 मी.मी. व्यासाच्या विंधणकामाचा (वेट ड्रिलींग) यात समावेश आहे). |
| 12 | विहीरीमध्ये बेंचर उतरविणे व परत बाहेर काढणे तसेच विंधण कामाचे वेळचे कटींग मटेरियल विहीरीबाहेर काढण्याची मजूरी. |
| 13 | बेंचर आणि इतर साहित्य खाली उतरविणे आणि विंधण काम पूर्ण झाल्यानंतर पुन्हा यंत्रावर चढविणे. तसेच अपारंपारिक योजनेच्या विंधणकामाकरीता स्थळाची विंधन कामाच्या दृष्टीने अनुकुलता करणे (site preparetion) आणि बेंचर प्रत्येक विंधण विहीरी स्थळी हलविणे साठीची मजूरी. |
| 14 | Water sample testing charges as directed … etc complete. |
| 15 | Providing & fixing 90 cm x 60 cm Marble e plate engreving 10 cm. height letter, figures including painting the letters/ figures with approved colours and shades etc complete. |
| 16 | Rapairs to Switch RoomRemoving the existing cement plaster of any thickness without causing dust and nuisance and stacking the debris upto a distance of 50 m and spreading in compound and cleaning the site etc complete . |
| 17 | Removing doors and window with frame and stacking the materials as directed with al leads , lift etc complete. |
| 18 | Providing & fixing rolling steel shutter fabricated from 18/19 gauges steel laths with side guides, bottom rail, brackets, door suspension shaft, including rolling springs, locking arrangement & housing box at the top with one coat of red lead primer etc complete. |
| 19 | Providing & fixing steel window of various sizes as per detailed drawing with welded square bar 12 mm at 10 cm centre to centre hot dip zinc coating without / with ventilators including fabrication, glazing with non-acetinic / plain / obscured glass panels of approved type & quality, all fixtyres & fastening without teak wood boxing & architraves & finishing with one coat of primer complete. |
| 20 | Providing & laying in situ cement concrete in M-150 (1:2:4 ) grade of trap / granite / quartzite / gneiss metal for foundations & bedding including bailing out water manually, formwork, compaction & curing, etc complete. |
| 21 | Providing sand face plaster externally in two coats using approved screened sand in all positions, including providing base coat of 15 mm thick in cement mortar 1:4 mixing approved water proofing compound at the rate of 1 kilogramme / 50 kg of cement and curing the same for not less than two days and keeping the surface of base coat rough to receive the sand faced treatment 8 mm thick in cement mortar 1:4 and finishing the surface by taking out grains and curing for 14 days including preparing the surface, watering and scaffolding etc. complete. |
| 22 | Providing cement plaster 12mm thick in two coats in cement mortar 1:4 with neeru finish etc complete. |
| 23 | Providing flush grooved pointing with cement mortar 1:3 to stone masonary including scaffolding & curing etc complete. |
| 24 | Providing structural steel work in rolled section ,like joist, , channel, angle , tee etc as per detailed design and drawing incluidng fixing in position without connnecting plate |
| 25 | Providing and fixing 6.00 mm thick ISI mark asbestos cement corrugated sheet roofing including galv.iron hook , bollt etc complete |
| 26 | Providing and applying two coat of waterproof cement paint of approved manufacture and colour to the plastered surface, including scaffolding preparing the surface, watering for two days etc. complete. |
| 27 | Providing & applying washable oil distemper paint of approved manufacture & colour to the plastered surface, including scaffolding preparing the surface watering for two days complete. |
| 28 | 7.50 BHP Submersible pumpsProviding erecting and giving test of submersibleto confirmng to IS 8034 and motor confirmingto IS 9283 with waterproof winding pump shall be suitable for various head and discharge with stainless steel shaft . Motor suitable for working 415 V +/- 10 % 3 ph 5o Hz A C supply with cable guard etc complete -3.00 BHP Submersible pumps – 1No. |
| 29 | Supplying and erection G.I. Pipe of following dia. And class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbing with Sockets and necessary material etc. complete.65mm dia. G.I. Pipe (Heavy class) 490.00 + (127.00+10%) |
| 30 | 63 mm dia. HDPE Pipe(8Kg/cm) For borewell |
| 31 | Supplying and erection GI pipe of B- Class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbing with Sockets and necessary material etc. complete.50 mm dia G.I.Bend.(262.00 +2%) +(42.00+20%) |
| 32 | 50 mm dia G.I.Tee (473.00 +2% ) + (42.00 +20% ) |
| 33 | Supplying and erecting flat flexible 3 core 4.0 sq.mm PVC sheathed A) submersible type copper cable 3 Core – 2.50Sqmm. |
| 34 | B) Aluminium Conductor PVC armoured 4 core cable 4 sqmm |
| 35 | Providing & supplying & jointing ISI mark CIDF Reflux (NRV) Valve including, railway fright, inspection charges, unloading from railway wagon .Loading in to truck, transport to the departmental store / site of work, Unloading, stacking etc. complete 63 mm dia. Reflux valve PN-1 grade. |
| 36 | providing double flange sluice valve confirming for IS 14846 including worn gear arrangement asper pressuer , stainless steel65 mm dia. Sluice valve PN-1 grade |
| 37 | Lowering , Laying and Jointing in position following C.I.D/F Reflex valve and sluice valve |
| 38 | Providing,and supplying C.I. D/F angle type spring loaded pressure releif valves of approved makes and quality including inspection charges etc complete 80 mm dia.pressure relief valve PN-1 grade |
| 39 | Lowering, laying and fixing in proper alignment and position all types of C.I. D/F angle type spring loaded pressure relief valves including cost of all material, labour, cost of conveyance from stores to site of work and giving satisfactory hydraulic testing, etc. complete. (For all |
| 40 | Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc |
| 41 | Supplying an erecting cast iron earthplate 60 X 60 X 0.6 cm. buried in specifically prepared earth pit( top edge of of plate 1.5 m. below ground level ) refilling with 30.00kg charcole and salt in alternate layers , necessary length of double earth strip connection to the plate with cadminium plate GI nutbolts 12 mm dia with bituminious compound connected to the nearest switchgear with end socket as per direction and duly tested by earth tester and recording the results supplying and erecting and erecting 19 mm dia vertical gi pipe 1.5 M long with funnel and mesh at top is included in the scope of work. Plate type electrod. |
| 42 | Supplying and erecting metal work in CRCA sheet including Iron work for cutting bending welding , treated with antitrust treatment and duly powder coated or painted withone coat of lead paint and 2 coat paint complete |
| 43 | Supplying and erecting marine plywood 12 mm thick for panel board |
| 44 | Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB ... upto 100 Amp |
| 45 | Point wiring for light/ fan/bell consealed type in min 20 mm PVC conduit with 1.5 sq.mm FR grade copper wires, modular type swich and socket, earthing required accessaries .etc complete. |
| 46 | BORE WELLDrilling of bore well 150 mm dia.with transporting etc...complete. |
| 47 | Providing and erecting ISI mark PVC Casing pipe 180 mm dia. (6kg/cm) etc...complete. |
| 48 | Providing and fixing PVC casing cap 180 mm dia. etc...complete. |
| 49 | Yield testing charges on successfully borewell etc...complete. |
| 50 | Source investigation charges etc… complete. |
| 51 | 3.00 BHP Submersible pumps for feeder bore wellProviding erecting and giving test of submersibleto confirmng to IS 8034 and motor confirmingto IS 9283 with waterproof winding pump shall be suitable for various head and discharge with stainless steel shaft . Motor suitable for working 415 V +/- 10 % 3 ph 5o Hz A C supply with cable guard etc complete -3.00 BHP Submersible pumps – 1No. |
| 52 | Supplying and erecting high density polythelen pipe ISI mark 40mm dia suitable of pressure of 6kg/cm2 connected to |
| 53 | Supplying and erection GI pipe of B- Class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbing with Sockets and necessary material etc. complete.50 mm dia G.I.Bend.(262.00 +2%) +(42.00+20%) |
| 54 | 50 mm dia G.I.Tee (473.00 +2% ) + (42.00 +20% ) |
| 55 | Supplying and erecting flat flexible 3 core 4.0 sq.mm PVC sheathed A) submersible type copper cable 3 Core – 2.50Sqmm. |
| 56 | B) Aluminium Conductor PVC armoured 4 core cable 4 sqmm |
| 57 | Supplying and erecting 50 mm dia. Gun metal gate valve complete with PN 16 rating as per specification 50 mm dia. Gun metal gate valve |
| 58 | Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc |
| 59 | Supplying and erecting metal work in CRCA sheet including Iron work for cutting bending welding , treated with antitrust treatment and duly powder coated or painted withone coat of lead paint and 2 coat paint complete |
| 60 | Supplying and erecting marine plywood 12 mm thick for panel board |
| 61 | Providing & supplying Air valves as per IS-10845 & MJP's standard specifications of approved make & quality of following diameter including all taxes , all transportation charges, inspection charges loading, unloading & stacking etc complete |
| 62 | Lowetring, laying & fixing in proper alignment & position all types of CI air valves as directed by Engineer-In-Charge including cost of all transportation, cost of all material & giving satisfactory hydraulic testing etc complete. |
| 63 | Providing & fixing in position Air valve shaft including providing and fixing GI Medium Class or 6mm thick M.S.pipe shaft 2.70 M long over the branch flange of air valve tee, providing PCC block M-150 concrete, 150 mm thick around the air valve teeincluding encasing of vertical shaft in M-150 as shown in type design together with providing and making the flanged joints wherever required and fixing of air valve tee, etc. complete as per type design and as directed by Engineer-in-charge for up to 150 mm diameter of pipe lines. |
| 64 | Repair To RCC ESRProviding and applying two coat of waterproof cement paint of approved manufacture and colour to the plastered surface, including scaffolding preparing the surface, watering for two days etc. complete. |
| 65 | Providing and applying two coats of synthetic enamel paint of approved colour to new/old structural steel work and wood work in buildings, including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete. |
| 66 | Providing, hoisting and fixing in position C.I. manhole, frame and cover of best quality and of required size and shape with locking arrangements including applying 2 coats of anti-corrosive paint, etc. complete.90 x 60 cm size and weight 35 kg. |
| 67 | Providing Supplying lowering ,laying and Jointing ISI mark G.I. lowering ,laying and Jointing pipe of following class anddia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores,etc.complete asper IS-1239/2004.Note : One coupler shall be provided with each full length of pipe cost of which is included in rates below.80 mm dia. G.I.Pipe (Heavy class) -10.30 kg/m |
| 68 | 80 mm dia. G.I.Pipe (Heavy class) - 10.30 kg/m |
| 69 | Providing double flanges Sluice Valve conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,inl. All taxes transportation etc. complete 80 mm dia. Sluice valve PN-1 |
| 70 | Lowering,Laying and jointing in position following C.I.D/Reflux valve ,sluice valve including cost of all laboure |
| 71 | Providing dry trap / granite / quartzite / gneiss rubble stone solling in 15 to 20 cm thick layers including hand packing & compaction etc. complete including all leads |
| 72 | Providing & laying in situ cement concrete in M-150 (1:2:4 ) grade of trap / granite / quartzite / gneiss metal for foundations & bedding including bailing out water manually, formwork, compaction & curing, etc complete. |
| 73 | Providing & Making Name plate on ESR structure with oil paint etc complete.2.00 m x 1.00 m size |
| 74 | Distribution SystemDismantling dead pipeline of M.S/R.C.C/C.I/P.S.C and /A.C/P.V.C/H.D.P.E Pipe including cost necessary excavation and refilling of trencher ,breaking and joint ,lifting the pipes and stackingA) For G.I /A.C/PVC/S.W/H.D.P.EPipe diameter less than 80 mm dia. |
| 75 | Excavation for foundation / pipe trenches in earth soil of all types, sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M |
| 76 | Excavation for foundation / pipe trenches in hard murum and boulders including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 77 | Excavation for foundation / pipe trenches in soft rock by controlled blasting, including trimming & leveling the bed by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 78 | Filling in plinth and floors / trenches murum bedding with approved murum from excavated materials from foundation in in 15 to 20 cm. layers including watering, compaction etc. complete. |
| 79 | Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 /13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays &rains, excluding GST levied by GI & GOM in all respect etc. complete.90 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 80 | 75 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 81 | 63 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 82 | Providing & Supplying G.I.Specials etc complete65 mm dia. G.I. SpecialsBend |
| 83 | Lowering , laying & jointing with HDPE/ G.I. pipes and specials of following class and dia. including conveyance from stores to site of work, all labour, giving satisfacyory hydraulic test , etc. complete either underground or in verticle position , H. D. P. E./ M.D.P.E. pipes in proper position including all specials by compression fitting/ electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by Engineer-In-Charge.90 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 84 | 75 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 85 | 63 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 86 | Providing double flanges Sluice Valve conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,inl. All taxes transportation etc. complete65 mm dia. S.V.( PN-1) |
| 87 | 50 mm dia. S.V.( PN-1) |
| 88 | Lowering & laying and jointing in position following CIDF/Refluxe valve,Butterfly valve and Sluice valve incl. cost of all labour jointing material incl. nuts bolts and giving satisfactory hydraulic tesing etc complete.65 mm dia. S.V. (PN-1) |
| 89 | 50 mm dia. S.V.( PN-1) |
| 90 | Providing & constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding , B.B. masonry in C.M. 1:5 proportion, precast R.C.C. frame & cover etc. complete..As above of 60 x 45 cm internal size and depth upto0.9M with precast R.C.C. slab cover. |
| 91 | Providing and supplying Air valve as per 14845 2000 and mjp standerd |
| 92 | Lowering,Laying and jointing in position following Air valve |
| 93 | Providing and laying in situ Plain Cement concrete in proportion M-150 of trap metal for foundation & bedding, including out water manually, form work, capacity & caring etc…… complete... |
| 94 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 95 | Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour , UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mmA) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul)for HDPE & PVC pipe For MDPE/UPVC Pipe SerFor MDPE/UPVC Pipe Service Connection on Disribution main For 15 mm Service connection(With Road Crossing) For 15 mm Service connection |
| 96 | (Without Road Crossing) For 15 mm Service connection |
| 97 | BOREWELL RECHARGE BY RAIN HARVESTING Excavation for foundation / pipe trenches in earth soil of all types, sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 98 | Excavation for foundation / pipe trenches in hard murum with boulders including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 99 | Excavation for foundation / pipe trenches in soft rock including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 100 | Filling in plinth and floors / trenches murum bedding with approved murum from excavated materials from foundation in in 15 to 20 cm. layers including watering, compaction etc. complete. |
| 101 | Providing & Fixing 180 mm dia PVC half round pipe for collecting the rain water of approved size including PVC drop ends. Stop ends as per code of standerd practice etc complete.110 mm dia PVC half round pipe |
| 102 | Lowering , laying & jointing with PVC pipes and specials of following class and dia. including conveyance from stores to site of work, all labour, giving satisfacyory hydraulic test , etc. complete either underground or in verticle position , as directed by Engineer-In-Charge.110 mm dia. PVC Pipe (6 Kg/cm) |
| 103 | RWH Shallo Percolation Pit providing, constructing 2.0 m deep shallow depth per colation pit comprising water line filter approved make. All works complete as per the drawing, technical specification and direction of the Engineer in charge ( Rate as per RC 2022-23)RWH water line filter |
| 104 | Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging etc complete. Please Enable Macros to View BoQ information |
