|
| 1 | Installation, Testing and Commissioning including loading, unloading and transportation from store to site of 9.0 mtr Long GI (65 micron DFT single dip) octogonal poles uniformally tappered with thickness of 3mm with bottom/top Dia of 175 mm x 70mm & base plate of 275x275x16mm/pcd 250 mm provided with proper door opened gear box for connections on the bottom side with G.I. Foundation Bolts (J Type) M24x750 mm long (Set of 4 no.’s per pole) |
| 2 | Providing & Laying of RCC foundation for 9.0 mtr. Long Octagonal poles including proper curing. 0.6mX0.6mX1.2m (RCC with concrete ratio 1:1.5:3 with minimum 8 Nos. of 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C for fixing the pole). |
| 3 | Providing and Earthing of Octagonal Pole Complete by GI Pipe 40 mm or GI Rod 20mm 3 mtr long through GI Strip (25x3)mm |
| 4 | Supply and fixing of Pre fabricated galvanized double way top bracket (1500mm long with 48.3 OD GI Pipe) to be fitted on top of Octogonal pole for holding lighting |
| 5 | Supply and fixing of Pre fabricate galvanized single way top bracket (1000mm long with 48.3 OD GI Pipe) to be fitted on top of Octogonal pole for holding lighting |
| 6 | Fixing of Pre fabricate galvanized single way top bracket (1000mm long with 48.3 OD GI Pipe) to be fitted on top of Octogonal pole for holding lighting including loading, unloading and transportation from store to site |
| 7 | Fixing of Pre fabricate galvanized two way top bracket with 48.3 OD GI Pipe) to be fitted on top of ST/ Octogonal pole for holding lighting & to give aesthetic look including loading, unloading and transportation from store to site. |
| 8 | Dismantling of single way top bracket |
| 9 | Dismantling of two way top bracket |
| 10 | Supply and Fixing of complete fittings of |
| 11 | 90 Watt LED Luminaries of IP 67 protection |
| 12 | 120 Watt LED Luminaries of IP 67 protection |
| 13 | 190 Watt LED Luminaries of IP 67 protection |
| 14 | Fixing of complete fittings of |
| 15 | 90 Watt LED Luminaries of IP 67 protection |
| 16 | 120 Watt LED Luminaries of IP 67 protection |
| 17 | 190 Watt LED Luminaries of IP 67 protection |
| 18 | Supply, installation, Testing & Commissioning of PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary indidual circuit including loop & earthings laid properly. |
| 19 | 3x 2.5 mm2 |
| 20 | 3x 1.5 mm2 |
| 21 | Installation, Testing & Commissioning including loading, unloading and transportation from store to site of PVC insulated multistrand flexible copper wire for service connections from connection plate to the LED luminary indidual circuit including loop & earthings laid properly. |
| 22 | 3x 2.5 mm2 |
| 23 | 3x 1.5 mm2 |
| 24 | Supply, installation, Testing & Commissioning of HDPE pipe 50 mm O/D and inner Dia 38 mm including trench excavation in hard soil (0.3x0.45x1000m) for laying of 25/16 sq mm Almunium armoured cable . The job further inludes refilling back the same and removal of surplus excavted material to an appropriate place. |
| 25 | Installation, Testing & Commissioning including loading, unloading and transportation from store to site of HDPE pipe 50 mm O/D and inner Dia 38 mm including trench excavation in hard soil (0.3x0.45x1000m) for laying of 25/16 sq mm Almunium armoured cable . The job further inludes refilling back the same and removal of surplus excavted material to an appropriate place. |
| 26 | Supply, installation, Testing & Commissioning of LT 25 mm2 4 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping. |
| 27 | Installation, Testing & Commissioning including loading, unloading and transportation from store to site of LT 25 mm2 4 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains including dismentling of existing cable and its carriage to the Divisional store. |
| 28 | Supply, installation, Testing & Commissioning of LT 16 mm2 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains excluding cost of pipe & trench excavation. The cable shall include end termination lugs with its crimping /taping. |
| 29 | Installation, Testing & Commissioning including loading, unloading and transportation from store to site of LT 16 mm2 2 core Aluminium XLPE Armoured cable to be carried through conduit/pipe U/G or A/G only in case of site constrains including dismentling of existing cable and its carriage to the Divisional store. |
| 30 | Supply, installation, Testing & Commissioning of PVC 10 mm2 2 core. The cable shall include end termination lugs with its crimping /taping. |
| 31 | Installation, Testing & Commissioning including loading, unloading and transportation from store to site of PVC 10 mm2 2 core. The cable shall include end termination lugs with its crimping /taping. |
| 32 | Supply, installation, testing and commissioning of astronomical switch - 30 Amps - 4 Pins - AC 250 Volt - High Quality Digital Programmable Timer - 18 Programs - New Countdown Program - Replaceable battery, Temperature Range -10 to 50 degree |
| 33 | Installation, Testing & Commissioning of astronomical switch- 30 Amps - 4 Pins - AC 250 Volt - High Quality Digital Programmable Timer - 18 Programs - New Countdown Program - Replaceable battery, Temperature Range -10 to 50 degree |
| 34 | Supply, installation, testing and commissioning of contactors of |
| 35 | 32 A, 3 Pole, with aux contact 1 NO, 1 NC |
| 36 | 63 A , 3 Pole, with aux contact 2 NO, 2 NC |
| 37 | 63A , 3 Pole, with aux contact 1 NO, 1 NC |
| 38 | Installation, testing and commissioning of contactor including loading, unloading and transportation from store to site of |
| 39 | 32 A, 3 Pole, with aux contact 1 NO, 1 NC |
| 40 | 63 A , 3 Pole, with aux contact 2 NO, 2 NC |
| 41 | 63 A , 3 Pole, with aux contact 1 NO, 1 NC |
| 42 | Supply, Installation, testing and commissioning of Outdoor type LT control panel size 900mmX 900mm X 450 mm having input main control of 100Amp MCCB with TPN Bus Bar with 40 Amp TPN MCB 4Nos for outgoing circuits,including astronomical switching with contactor of required capacity. The panel should be fitted with a digital composite voltmeter/ ampermeter/ indicator set with selecter switch and backup protection system, thimbling and the panel shall further be provided with proper openings on front side as well as on rear side including its locking arrangement and also with required glands and 4No. angle iron legs for grouting the panel on bed , the panel shall also be provided with powder coat/PU paint. The item includes its thimble as required |
| 43 | Installation, testing and commissioning including loading, unloading and transportation from store to site of Outdoor type LT control panel size 900mmX900mmX450mm having input main control of 100Amp MCCB with TPN Bus Bar with 40 Amp TPN MCB 4Nos for outgoing circuits,including astronomical switching with contactor of required capacity. The panel should be fitted with a digital composite voltmeter/ampermeter/indicator set with selecter switch and backup protection system, thimbling and the panel shall further be provided with proper openings on front side as well as on rear side including its locking arrangement and also with required glands and 4No. angle iron legs for grouting the panel on bed , the panel shall also be provided with powder coat/PU paint. The item includes its thimble as required |
| 44 | Supply, installation, testing and commissioning of Dust/rain/snow-proof canopy type mini-outdoor LT feeder panel of size 450X300mm with front door opening duly powdered colour coated with inbuilt 2No TPN 16-32 Amp MCCB,TPN busbars of same capacity installed on cement concrete block with 4 angle iron legs grouted in the cement concrete of termination of main 25 sqmm cable and outgoing 25/16 sqmm cable circuits. |
| 45 | Supply ,Installation, testing and commissioning including loading, unloading and transportation from store to site of Dust/rain/snow-proof canopy type mini-outdoor LT feeder panel of size 450X300mm with front door opening duly powdered colour coated with inbuilt 2No TPN 16-32 Amp MCCB,TPN busbars of same capacity installed on cement concrete block with 4 angle iron legs grouted in the cement concrete of termination of main 25sqmm cable and outgoing 25/16 sqmm cable circuits. |
| 46 | Re-alignment of tilted Street Light Pole |
| 47 | Supply, installtion, testing & Commissioning of Single pole MCB |
| 48 | 5 Amp |
| 49 | 10 Amp |
| 50 | 16 AMP |
| 51 | 32 Amp |
| 52 | Installation, testing & Commissioning of Single pole MCB including loading, unloading and transportation from store to site of |
| 53 | 5 Amp |
| 54 | 10 Amp |
| 55 | 16 AMP |
| 56 | 32 Amp |
| 57 | Supply, Installation, testing and commissioning of input main control TPN MCCB with Bus Bar, 36 kA breaking Capacity |
| 58 | 100 A |
| 59 | Installation, testing and commissioning of input main control TPN MCCB with Bus Bar including loading, unloading and transportation from store to site of |
| 60 | 100 A |
| 61 | Supply, installation, commissioning and Testing of 11KV Fuse Set (Customised) for Distribution Transformers as per KPDCL Drawing no. CE/P&P/DRG/2023/LTFS/001 (enclosed) |
| 62 | 25 KVA |
| 63 | 63KVA |
| 64 | 100 KVA |
| 65 | Installation, commissioning and Testing of 11KV Fuse Set (Customised) for Distribution Transformers (including loading, unloading and transportation from Divisional store to different sites upto 4 KM-Material to be provided Departmentally) |
| 66 | 25 KVA |
| 67 | 63 KVA |
| 68 | 100 KVA |
| 69 | Supply, fabrication and installation of Transformer Pad/G.I Channel Bedding including GI Pipe/Channels/Braces/ Clamps/Collars of sizes for Substations including frame for LA, GO etc |
| 70 | 25 KVA- (250 Kg of GI includes Channels/Braces of sizes including Clamps /Collars) |
| 71 | 63 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars) |
| 72 | 100 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars) |
| 73 | Fabrication and installation of Transformer Pad/G.I Channel Bedding including GI Pipe/Channels/Braces/ Clamps/Collars of sizes for Substations including frame for LA, GO etc (including loading, unloading and transportation from Divisional store to different sites upto 4 KM -Material to be provided Departmentally) |
| 74 | 25 KVA- (250 Kg of GI includes Channels/Braces of sizes including Clamps /Collars) |
| 75 | 63 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars) |
| 76 | 100 KVA (300 Kg of GI includes Channels/Braces of sizes including Clamps /Collars) |
| 77 | Supply,Installation, Testing and Commissioning of 11 kV Horn Gap Fuse Set 3 Phase 200A |
| 78 | Installation, Testing and Commissioning of 11 kV Horn Gap Fuse Set 3 Phase 200A (including loading, unloading and transportation from Divisional store to different sites upto 4 KM -Material to be provided Departmentally) |
| 79 | Supply,Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 KV, 10 KA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V) |
| 80 | Installation, Testing and Commissioning of Gapless Surge Arrestor, 9 KV, 10 KA, Lighting Arrestor Set Heavy duty with Polymer Housing, Station type conforming to IEC-99-4 Capable of withstanding Maximum continuous operating voltages (M.C.O.V) (including loading, unloading and transportation from Divisional store to different sites upto 4 KM -Material to be provided Departmentally) |
| 81 | Supply, Installation, Testing and Commissioning of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V) |
| 82 | Installation, Testing and Commissioning of 11KV 200 Amperes, Triple pole switches Gang Operated (G.O. Set) conforming: IS-2544, IS: 5340 (Part-III) and SS: 9921 (Part-I -V) (including loading, unloading and transportation from Divisional store to different sites upto 4 KM -Material to be provided Departmentally) |
| 83 | Supply, Installation, Testing and Commissioning of 9 Mtr ST Pole ST-410, SP-33 well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5m. Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded. |
| 84 | Installation, Testing and Commissioning (including loading, unloading and transportation upto 4 Km from Divisional store to different sites (including Manual Carriage upto 100 Mtr at site)-Material to be provided Departmentally) of 9 Mtr ST Pole ST-410, SP-33 well finished and coated with black bituminous paint upto plant depth and Red-Oxide coated above ground level with earthing arrangement through bolt welded on pole of 14mm diameter, provided at height of 300mm above the planting depth which should be 1.5m.Top plate 3mm thick fully welded & bottom plate 35cm*35cm, 5mm thick fully welded. |
| 85 | Supply and fixing (including loading, unloading and transportation) of Nuts and Bolts full thread of sizes Galvanized as per IS |
| 86 | Fixing (including loading, unloading and transportation) of Nuts and Bolts full thread of sizes Galvanized as per IS (Material to be Provided Departmentally including loading/unloading/transportation from Divisional stores to different Sites) |
| 87 | Providing and laying of Earthing of Substation---Excavation of earth pit of dia 650mm & depth 3000 mm, installation of Earthing pipe of 40 mm Nominal bore & 4mm wall thickness & length 2.5 mtr long as per IS 1239. GI strip for neutral earthing of size 25mm*3mm for connection of transformer body, G.O Set & lightening Arrestor as per IS 2629/85, GI nuts & bolts, refilled with earth enhancement materials & earth chamber made of brick masonry with RCC slab cover. |
| 88 | Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of Danger Plate With Clamps as per Standards. |
| 89 | Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of GI Barbed Wire. |
| 90 | Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of Anti-Climbing Device with Clamps |
| 91 | Supply and Painting of ST poles with one coat of Red Oxide primer and two coats of Aluminum paint. |
| 92 | Supply, Installation, Testing and Commissioning (including loading, unloading and transportation) of 11KV Pin Insulators with Pins (5KN) |
| 93 | Installation, Testing and Commissioning (including loading, unloading and transportation) of 11KV Pin Insulators with Pins (5KN) (Material to be Provided Departmentally including loading/ unloading/ transportation from Divisional stores to different Sites) |
| 94 | Providing and fixing of Aluminum Lugs/Thimbles of sizes |
| 95 | 10 SQMM |
| 96 | 16 SQMM |
| 97 | 25 SQMM |
| 98 | 35 SQMM |
| 99 | 50 SQMM |
| 100 | 70 SQMM |
| 101 | 95 SQMM |
| 102 | 120 SQMM |
| 103 | 150 SQMM |
| 104 | 185 SQMM |
| 105 | 240 SQMM |
| 106 | 300 SQMM |
| 107 | 400 SQMM |
| 108 | 500 SQMM |
| 109 | 630 SQMM |
| 110 | Fixing of Aluminum Lugs/Thimbles of sizes |
| 111 | 10 SQMM |
| 112 | 16 SQMM |
| 113 | 25 SQMM |
| 114 | 35 SQMM |
| 115 | 50 SQMM |
| 116 | 70 SQMM |
| 117 | 95 SQMM |
| 118 | 120 SQMM |
| 119 | 150 SQMM |
| 120 | 185 SQMM |
| 121 | 240 SQMM |
| 122 | 300 SQMM |
| 123 | 400 SQMM |
| 124 | 500 SQMM |
| 125 | 630 SQMM |
| 126 | Supply, Installation, Testing and commissioning of G.I Mukey for Shackle Insulators with bolt of (50x6) mm |
| 127 | Installation, Testing and commissioning of G.I Mukey for Shackle Insulators with bolt of (50x6)mm (Including unloading/loading/transportation from store to site) |
| 128 | Supply, Installation, testing and commissioning of Suspension/Tension Clamp with eye hook |
| 129 | Installation, testing and commissioning of Suspension/Tension Clamp with eye hook (including loading, unloading and transportation from Divisional store to different sites upto 4 KM -Material to be provided Departmentally) |
| 130 | Providing of material and laying of Cement bottoming of poles 1:2:4 Mix as per REC Standards 0.48 M3 per Pole |
| 131 | Supply, Installation, testing & Commissioning of 33 kV Lightening Arrestor,(33 kV ,10 kA ,Station class,ZnO, Polymer) gapless |
| 132 | Installation, testing and commissioning of 33 kV Lightening Arrestor,(33 kV ,10 kA ,Station class,ZnO, Polymer) gapless (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally) |
| 133 | Supply, Installation, testing & Commissioning of 11 kV Isolator, Double Break,3-pole, 630 Amp, horizontal mounting Type, with Earth Switch. |
| 134 | Installation, testing and commissioning of 11 kV Isolator, Double Break,3-pole, 630 Amp, horizontal mounting Type, with Earth Switch. (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally) |
| 135 | Supply, Installation, testing & Commissioning of 33 kV Isolator with Earthing Blade (36kV,800A, Outdoor,3 poles, 25 kA) |
| 136 | Installation, testing and commissioning of 33 kV Isolator with Earthing Blade (36kV,800A, Outdoor,3 poles, 25 kA). (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally) |
| 137 | Installation, Testing and Commissioning (including loading, unloading and transportation from one site to different sites (store/workshop/sites which includes arrangement of crane/sleepers/Trucks etc) |
| 138 | 25 KVA |
| 139 | 63 KVA |
| 140 | 100 KVA |
| 141 | 100 KVA , 33/0.433 KV |
| 142 | Dismantling of Distribution Transformer (including loading, unloading and transportation from one site to different sites (store/workshop/sites) upto the radius of 4 KM) (which includes arrangement of crane/sleepers/Trucks etc) |
| 143 | 25 KVA |
| 144 | 63 KVA |
| 145 | 100 KVA |
| 146 | 100 KVA , 33/0.433 KV |
| 147 | Installation, Testing and Commissioning of Distribution Transformer |
| 148 | 25 KVA |
| 149 | 63 KVA |
| 150 | 100 KVA |
| 151 | 100 KVA , 33/0.433 KV |
| 152 | On site Repairment and retification of the below mentioned equipment |
| 153 | 25 KVA Servostabiliser |
| 154 | 50 KVA Servostabiliser |
| 155 | Dismantling of Damaged Servostabiliser from Site and transportation, Loading and Unloading (Which includes arrangement of crane/sleepers/Trucks etc) to Divisional Workshop and after repairs back to site and re-installation of same |
| 156 | 25 KVA Servostabiliser |
| 157 | 50 KVA Servostabiliser |
| 158 | Dismantling of damaged street light poles (Sub-Standard) along with Fixtures with carriage (Mechanical/Mannual), Loading at Site and Unloading/Stacking in Divisional Stores. |
| 159 | 8 Mtr STP Pole |
| 160 | 9 Mtr Octoganal Pole |
| 161 | 6 Mtr Octoganal Pole |
| 162 | Providing and laying of foundation and cover shed for Servo-Stabilizer including wire mesh fencing around the equipment of size upto 8'x4' made out of wire mesh 1\\"x1\\"square including fixing in cement 1:2:4 including welding cutting etc. Complete in all respect |
| 163 | Dismantling of Canopy Fencing of Servo-Transformer & Re-erection of same. |
| 164 | Supply, Installation, Testing and commissioning of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm |
| 165 | Installation, Testing and commissioning of 11kV Polymeric composite Disc Insulator 12kV,min failing load 45kN, Lighting Impulse 75kV Positive and 80kV Negative, creepage distance 320mm (including loading, unloading and transportation from Divisional store to different sites -Material to be provided Departmentally) |
| 166 | Excavation in any type of soil including hard laterite soil |
| 167 | Back filling of available excavated earth |
| 168 | Supply and Laying of GI Pipe 50 mm dia with required no of collars |
| 169 | Laying of GI Pipe 50 mm dia with required no of collars (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally) |
| 170 | Reinstatement of roads |
| 171 | Supply and Fixing of Insulating Piercing Connectors of sizes |
| 172 | Fixing of Piercing Connectors (including loading, unloading and transportation from Divisional store to different sites-Material to be provided Departmentally) |
| 173 | Supply, Installation, testing and commissioning of HT Air Bundled Cable on ST/PCC Poles including Lugs/Thimbles/Clamps |
| 174 | 35 mm² AB (HT) Cable (3x35+1x70 insulated) mm² XLPE (11 kV, 3C + Earth) |
| 175 | 35 mm² AB (HT) Cable (3x35+1x35 mm² insulated) mm² XLPE |
| 176 | 50 mm² AB (HT) Cable (3x50 + 1x70 insulated) mm² XLPE (11 kV, 3C + Earth) |
| 177 | 70 mm² AB (HT) Cable (3x70+1x70 insulated) mm² XLPE (11 kV, 3C + Earth) |
| 178 | 70 mm² AB (HT) Cable (3 x 70 + 1x95 insulated) mm² XLPE(11 kV, 3C + Earth) |
| 179 | 95 mm² AB (HT) Cable (3x95+1x95 insulated) mm² XLPE(11 kV, 3C + Earth) |
| 180 | 120 mm² AB (HT) Cable (3x120 + 1x95 mm² insulated) XLPE(11 kV, 3C + Earth) |
| 181 | 185 mm² AB (HT) Cable (3x185+1x120 insulated) mm² XLPE(11 kV, 3C + Earth) |
| 182 | Installation, testing and commissioning of HT Air Bundled Cable on ST/PCC Poles (including loading, unloading and transportation from Divisional store to different sites upto 4 KM-Material to be provided Departmentally) |
| 183 | 35 mm² AB (HT) Cable (3x35+1x70 insulated) mm² XLPE (11 kV, 3C + Earth) |
| 184 | 35 mm² AB (HT) Cable (3x35+1x35 mm² insulated) mm² XLPE |
| 185 | 50 mm² AB (HT) Cable (3x50 + 1x70 insulated )mm² XLPE (11 kV, 3C + Earth) |
| 186 | 70 mm² AB (HT) Cable (3x70+1x70 insulated)mm² XLPE (11 kV, 3C + Earth) |
| 187 | 70 mm² AB (HT) Cable (3 x 70 + 1x95 insulated)mm² XLPE(11 kV, 3C + Earth) |
| 188 | 95 mm² AB (HT) Cable (3x95+1x95 insulated)mm² XLPE(11 kV, 3C + Earth) |
| 189 | 120 mm² AB (HT) Cable (3x120 + 1x95 mm² insulated) XLPE(11 kV, 3C + Earth) |
| 190 | 185 mm² AB (HT) Cable (3x185+1x120 insulated) mm² XLPE(11 kV, 3C + Earth) |
| 191 | Dismantling of damaged/Old HT Air Bundled Cable of different sizes and transportation of same to divisional store including loading and unloading |
| 192 | Dismantling of damaged/Old HT Air Bundled Cable of different sizes excluding transportation. |
| 193 | Re-erection of damaged/Old HT Air Bundled Cable of different sizes within the radius of 50 Mtrs Please Enable Macros to View BoQ information |
