|
| 1 | Providing and treating the OLD surface with one coat of BIOWASH of approved make before appying paint, surface preparatioin etc complete as per specification and as directed by the Engineer-in-charge |
| 2 | Providing and applying white cement based wall putty of approved make over concrete or Plastered surface up to 3 mm thick to get uniform surface free from undulation including scaffolding, cleaning complete all as directed by the Engineer-in-charge |
| 3 | Providing, applying wall painting two coats with Lusture/premium emulsion paint of approved brand to give an even shade over a coat of cement primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 4 | Providing and Painting two coats of synthetic enamel paint on steel surfaces of approved brand and manufacture to give an even shade over a primer coat.including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge |
| 5 | Providing and painting over wooden surfaces with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade with two coats on new work excluding wood primer including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in- charge. |
| 6 | Providing and Painting with Epoxy paint at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer , preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficiant water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any,scaffolding etc. complete.all as per manufacturers Technical Data and as directed at site to acheive 200 micron dry film thickness (50 micron primer coat and 150 micron finishing coat). |
| 7 | Providing and painting two (or) more coats with Epoxy paint at all locations prepared and applied as per manufacturer' specifications including a priming coat if specified by the manufacturer, preparation of surface by cleaning with wire brush and rubbing with sand paper to remove dust, dirt etc, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper,by cleaning with wire brush and rubbing, making free of rust, dirt etc. filling the holes, joints, cracks if any etc. complete.all as per manufacturers technical data and as directed at site to acheive 200 micron film thickness (50 micron primer coat + 150 micron finishing coat). |
| 8 | Providing RCC structural repairs in old damaged concrete structures / surfaces with approved Polymer, Removal of loose/Spalled or damaged concrete and cleaning the concrete surface and Cleaning the rebars with Acetone for complete rust removal and washing with water to make the surface clean, Applying protective coat / bond coat using polymer and cement in the proportion of 1; 1.5; Reinstate the area with polymer modified mortar in layers of maximum 20 mm with the approved proportion etc complete all as per clause of specificaiton and as directed by EIC. Note: 1. Scaffolding will be paid separately under relevant item. |
| 9 | Providing and fixing double Tubular scaffolding system using H- Frames / APS system or (cup lock type) on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. Note: 1. The mode of measurement shall be in sq.m. by considering the length x height of scaffolding with a depth of about 1.20 meter. 2. The payment shall be made once irrespective of duration of scaffolding . 3-Scaffolding less than 6 m in elevation height shall not be measured for payment purposes. |
| 10 | Supplying and fixing in position construction cum debris safety net of HDPE to carry out the work mentioned, Item includes (1) Double layer safety net consisting with 5mm Braided cord with 70mm/100mm mesh and Fishnet in 11mm mesh (2) high quality Telescopic Steel Props a length utpo 5.50 mtrs and as per Clause-15 of technical specifications. and as directed by the Engineer-in-charge. |
| 11 | Providing and applying Polysulphide compound in “V” grooves of 10 mm size for sealing gaps for airtight-ness including applying a coat of primer,cutting and making the existing cracks in V shape of required depth, scaffolding etc to be completed generally as per specifications and directed by EIC. |
| 12 | Providing and Fixing Homogeneous 3.00 mm thick PVC sheet / tile in flooring and skirting of approved make in approved pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacturer including, levelling small undulations with plasterof paris if required , rolling with light wooden roller weighing about 5 kg all complete as directed by Engineer-in-charge. |
| 13 | Supplying of Arobond-44 Water-based Floor covering adhesive for PVC flooring with thickness above 1mm at as per specification and asdirected by Engineer-in-charge |
| 14 | Carrying out miscellaneous civil works like carpentry, plumbing, removing/shifting of equipment, machines, tools, earth excavation by supplying Mandays etc. complete as per specification and as directed by Engineer-In-charge. |
| 15 | Providing and painting walls with (TWO coats) of approved shade of high build protective , elastomeric water proof exterior/interior grade paint of approved make of required shade, minimium dry film thickness of 250 microns acheived in two or more coats / as per manudacturer's specifications including preparation of the surfaces by scrapping / wire brush , scaffolding complete. Primer coat will be with approved make with water in ratio of 1:2 and 2 coats of finishing coat without water all as directed by Engineer-in- charge |
| 16 | Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethelene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification. Note: 1.Aluminium frame work will be paid under reelevant item. 2. ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site. |
| 17 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners etc complete generally as per clause of specification and as directed by EIC. (fittings glazing and panelling shall be paid for separately)Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) with colour anodizing. |
| 18 | Supplying, applying, cutting and levelling of PU foam for sealing of existing gaps, holes in false ceiling etc complete generally as per specifications of manufacturers and as directed by EIC. Note 1 Can = 750 ml volume. |
| 19 | Providing and fixing of Self-adhesive glow Night Tape Only Arrow - Emergency Route Showing - a size of 50mm width of approved make etc complete as per specification and as directed by Engineer-in-charge. |
| 20 | Supplying and fixing of 6 mm thick Flat fibre cement sheets in ceiling including fixing the sheets to existing frame work with Stainless steel(SS) nuts bolts of suitable size about 5mm(3/16) x 25 mm etc complete generally as per specification and as directed by E-I-C |
| 21 | Replacing of Gas bottle cylinder of existing revolving chairs as per specification and as directed by EIC |
| 22 | Replacing of Handles of chairs of existing revolving chairs as per specification and as directed by EIC |
| 23 | Replacing of revolving chair mechansim of existing revolving chairs as per specification and as directed by EIC |
| 24 | Replacing of Castors of existing revolving chairs as per specification and as directed by EIC |
| 25 | Replacing of Swivel base of existing revolving chairs as per specification and as directed by EIC |
| 26 | Painting G.I/CS pipes/steel strutural with 2 coats of synthetic enamal paint of approved colour over a coat of approved Zinc Chromate Primer all as per specifications and as directed by the Engineer-in-charge.Painting to Pipes/steel angles sizes upto 50 mm |
| 27 | Painting G.I/CS pipes/steel strutural with 2 coats of synthetic enamal paint of approved colour over a coat of approved Zinc Chromate Primer all as per specifications and as directed by the Engineer-in-charge. Painting to Pipes/steel angles sizes upto 100 mm |
| 28 | Painting G.I/CS pipes/steel strutural with 2 coats of synthetic enamal paint of approved colour over a coat of approved Zinc Chromate Primer all as per specifications and as directed by the Engineer-in-charge.Painting to Pipes/steel angles sizes upto 150 mm |
| 29 | Painting road surface marking with Thermoplastic paint hot applied to give uniform finish with Glass beeds / power Topping, on bituminous surface in white / yellow shade including cleaning the surface of all dirt, scales, oil, grease and other foreign material etc complete as directed by the Engineer-in-charge. |
| 30 | Painting Roadex Kerb stone Paint consisting with Modified Alkyd Resin at kerb stone surface in white / yellow shade including cleaning the surface of all dirt, scales, oil, grease and other foreign material etc complete as directed by the Engineer-in-charge- |
| 31 | Providing and applying GRANOTONE Floor Paint Terracotta Colour Polyurethane and Acrylic Polymer Based floor paint for paver blocks etc complete as per specifications and as directed by EIC. |
| 32 | Painting to existing chain link fencing from both side by using of zinc chromate steel primer and two coats of synthetic enamel paint,fencing full height about 3.0 m, 600 mm dia concerntina with 06 nos wires placing on 50 x50 mm ms angles @ 3.5 m c/c including preparation of surfaces, erecting temporary working platform etc. complete as per specification and as directed by EIC. |
| 33 | Providing & Applying two coats of high-performance, water-based, elastomeric anti-carbonation coating system of Dekguard WB 300 of Fosroc make or equivalent approved make including a one base coat of Primer Dekguard WB of Fosroc or equivalent approved make as per specification to give uniform finish with the help of brush, rollers, scafolding etc complete as directed. |
| 34 | Providing and fixing One Way Mirror Window Film Sun Blocking Heat Control Anti UV Reflective Film Static Cling Window Tint of approved shade and make etc complete as per specifications and as directed by EIC. |
| 35 | Providing and fixing glazing in aluminium doors, window, ventilator shutters and partitions etc with PVC / Neoprene gasket etc. complete as per the architectural drawings and directions of the Engineer-in-charge (Cost of snap beading shall be paid in basic item) |
| 36 | Filling the gap between aluminium frame & adjacent RCC / Brick work / Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Up to 6 mm depth and 6 mm width. |
| 37 | Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplaus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge |
| 38 | Supplying and wearing safety gears like dust respirator, disposable gloves and overshoe cover on daily basis to each labour as per Clause-12 of technical specifications and as directed by the Engineer-in-charge. |
| 39 | Supplying and wearing additional safety and protective gears to carry out the work mentioned in Item, Safety and protective gears includes (1) Chemical / Eye Protection Splash Googles (2) Safety helmates (3) Safety harness and (4) boiler suit for cleaning labours and as per Clause-13 of technical specifications. and as directed by the Engineer-in-charge. |
| 40 | Supplying and placing disposal bags of large size for disposing debris as per Clause-14 of technical specifications and as directed by the Engineer-in-charge. |
| 41 | Lead charges for lead Exceeding 2 KM but not exceeding 3 KM, by mechanical transport including loading, unloading, stacking / levelling etc. Please Enable Macros to View BoQ information |
