|
| 1 | 21.1.1.2) Providing and fixing aluminium work for doors, Windows, ventilators and partions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make and fixing with dash fasteners of required dia and size, including necessary fitting up the gaps at junctions,i.e. at top bottom and sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing / paneling C.P. brass /stainless steel screws ,all complete as per architectural drawings and the directions of Engineer-In-charge (Glazing and paneling to be paid seperately) For fixed portion. Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 2 | 21.1.2.2) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minmium thickness of powder coating 50 micron) |
| 3 | 21.3.2) Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float plain / colour glass panes of 5.50mm thickness. |
| 4 | 21.2.2) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with necessary screws etc. complete as per drawings and directions of engineer-in-charge. Pre-Laminated particle board with decorative lamination on both sides. |
| 5 | 21.8.1) Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. Filling up to 5mm depth and 5mm width. |
| 6 | 21.13) Providing and fixing 100mm brass locks (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. |
| 7 | 21.4.1) Providing and fixing double action hydraulic floor spring of approved brand and manufacture , having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With brass / steel cover plate minimum 1.25 mm thickness. |
| 8 | 9.83) Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 9 | 9.101.2) Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper. |
| 10 | 9.96.1) Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : Size 300X16mm |
| 11 | 9.97.2) Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. Size 250X10mm |
| 12 | 9.100.2) Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in- charge. Powder coated minimum thickness 50 micron aluminium. |
| 13 | 11.38.00) Providing and fixing white/ coloured glazed tiles of approved make (Nitco / orient / somany / Kajaria / johnson or equivalent) in platforms, skirting, toilet walls etc.laid on bed of 12mm thick cement mortar 1:3 ( 1 cement:3 coarse sand) finished with flush pointing in white cement etc. all complete. ( GRAY CEMENT SHALL BE ISSUED FREE OF COST AT NALCO'S STORE.) White cement required for the work shall be the contractor's scope. |
| 14 | 11.41.2) Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness, including grouting the joints with white cement and matching pigments etc., complete White cement required for the work shall be procured by the contractor. Size of Tile 600x600 mm |
| 15 | 12.45.1) Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5mm thick tapered edge gypsum palin board conforming to IS2095-part1. |
| 16 | 13.42.1) Distempering with 1st quality acrylic distemper (ready mixed) of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats |
| 17 | 13.43.1) Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : |
| 18 | 13.2.2) Providing and laying 15mm thick cement plaster in cement mortar 1:6 (1cement:6 sand) on the rough sides of single or half brick wall or masonary work using approved type of sand including curiing etc., all complete for all height.( CEMENT WILL BE ISSUED FREE OF COST AT NALCO'S STORE ). |
| 19 | 13.26.00) Providing and applying plaster of parris putty of 2mm thickness on the old / new walls to give an even and smooth surface with all materials, tools & tackles etc. all complete. |
| 20 | 15.41.00) Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. |
| 21 | 15.25.00) Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. |
| 22 | 8.28.1) Providing and fixing 4mm thick one side decorative veneer confirming to IS 1328 (type-1) natura woods or equivalent etc for plain lining / cladding with necessary screws, including priming coat on unexposed surface with. Decorative veneer facings of approved manufacture . |
| 23 | 9.140.1) Providing and fixing plain lining with necessar screws /nuts & bolts/ nails including a coat of approved primer on one face , and fixed on wooden /steel frame work , complete as per Direction of EIC ( Frame work will be paid seperately) .12mm thick commercial ply confirming to IS 1328 BWR type |
| 24 | 9.1.2) Providing wood work in frames in doors, windowa, clerestory windows and other frames, wrought framed fixed in position with hold fast lugs or with dash fastners of required dia & length (hold fast,lugs,dash fasteners paid separetly) Sal wood |
| 25 | 15.12.1) Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead etc. Please Enable Macros to View BoQ information |
