|
| 1 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe 32mm dia (17.28.1.1). |
| 2 | Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete. Flexible pipe 32mm dia(17.28.2.1). |
| 3 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass Screws and washers complete. (17.31). |
| 4 | Providing and fixing 600x120x5 mm glass Self with edge round off, supported on anodiesd aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete. (17.33). |
| 5 | Providing and fixing TOILET PAPER HOLDER C.P. Brass (17.34.1). |
| 6 | Dismantling Old Plaster or Skirting Racking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. DSR No-15.56, |
| 7 | 12 mm thick Cement Plaster with Cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). DSR-13.4.1, |
| 8 | Removing White or Colour wash by Scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. DSR-13.88, |
| 9 | Providing and Applying white Cement based Putty of average thickness 1 mm. of approved brand and manufacture. Over the Plastered wall Surface to Prepare the Surface even and Smooth Complete. (DSR-13.80), |
| 10 | Finishing wall with Premium Acrylic Smooth exterior Paint with Silicone Additives of required Shade Old work. (Two or More Coats applied @1.43 ltr/10 sqm) Over Existing Cement Paint Surface. (DSR-13.112.1), |
| 11 | Wall Painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) Content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. Two Coat, DSR.N0-13.82.2), |
| 12 | Painting with synthetic enamal paint of approved brand and manufactorar of required colour to give an evan shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture DSR No. 13.62.1 |
| 13 | Providing and fixing G.I. Union in G.I. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, New work, ( 15 mm nominal bore ) 18.46.1 |
| 14 | Providing and fixing G.I. Union in G.I. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, New work, ( 25 mm nominal bore ) 18.46.3 |
| 15 | Providing and fixing G.I. Union in G.I. pipe incluliding cutting cutting and threading the pipe and making long screw etc, complete, New work, ( 32 mm nominal bore ) 18.46.4 |
| 16 | Providing And Fixing Fly Proof galvanized M.S. wire gauge to windows and Clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. DSR No-9.51.1, |
| 17 | Renewing Glass Panes, with Wooden Fillets wherever Necessary Float Glass Panes of nominal thickness 4 mm (weight not less than 10 kg/Sqm, DSR -14.6.1, |
| 18 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. DSR-9.83, |
| 19 | Providing and fixing brass Curtain Rods of wall thickness 1.25 mm with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete. 25 mm dia meter. DSR-14.28.2, |
| 20 | Providing and fixing ISI marked oxidised M.S Tower bolt black finish (Barrel type) with necessary screws etc complete Copper Oxidised as per lS 1378, 250x10 mm (DSR -9.63.1) |
| 21 | Providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 250x10 mm (DSR -9.74.1) |
| 22 | Providing and fixing bright finished brass lower bolts (barrel type) with necessary screws etc complete. 200x10 mm (DSR -9.74.2) |
| 23 | Providing and fixing wash basin with C.l. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require. Stainless Steel A lSl-304(18/8) Wash basin Size-530x345 mm with single 15 mm C.P. brass pillar tap. (17.7.11) |
| 24 | Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (20mm nominal dia pipe )18.8.2, |
| 25 | Providing and fixing Chlorinated Polyyinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plains & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. This includes joints of pipe and fitting with one step CPVC solvent cement and the cost of cuttings chases and making good the same including testing of joints complete as per direction of Engineer Incharge. concealed work. including cutting chases and making good the walls etc. (25mm nominal dia pipe )18.8.3, |
| 26 | Providing and fixing C.P. Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( 18.49.1) |
| 27 | Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS Standerd and weighing not less 810 gms. 15 mm nominal bore ( 18.50.1) |
| 28 | Providing and fixing C.P. Brass long body bib cock of approved quality conforming to IS Standerd and weighing not less 690 gms. 15 mm nominal bore ( 18.51.1) |
| 29 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. DSR 17.16A |
| 30 | Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete: 125x64x2.50mm (9.71.1) |
| 31 | Providing and fixing bright finished brass handles with screws etc. complete: 125 mm (9.81.1) |
| 32 | Providing and fixing magnetic catcher of approved quality in cupboard/wardrobe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type) (9.114.2) |
| 33 | Providing and fixing power coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per direction of Engineer-in charge. (9.115) Please Enable Macros to View BoQ information |
