|
| 1 | TAPER SHANK TWIST DRILL- Dia 20 | Details as per Annexure II |
| 2 | TAPER SHANK TWIST DRILL- Dia 19 | Details as per Annexure II |
| 3 | TAPER SHANK TWIST DRILL- Dia 18 | Details as per Annexure II |
| 4 | TAPER SHANK TWIST DRILL- Dia 17 | Details as per Annexure II |
| 5 | TAPER SHANK TWIST DRILL- Dia 16 | Details as per Annexure II |
| 6 | TAPER SHANK TWIST DRILL- Dia 15 | Details as per Annexure II |
| 7 | TAPER SHANK TWIST DRILL- Dia 14.5 | Details as per Annexure II |
| 8 | TAPER SHANK TWIST DRILL- Dia 14 | Details as per Annexure II |
| 9 | TAPER SHANK TWIST DRILL- Dia 13.5 | Details as per Annexure II |
| 10 | PARALLEL SHANK TWIST DRILL- Dia 2 | Details as per Annexure II |
| 11 | PARALLEL SHANK TWIST DRILL - LONG SERIES- Dia 2 | Details as per Annexure II |
| 12 | PARALLEL SHANK TWIST DRILL- Dia 2.1 | Details as per Annexure II |
| 13 | PARALLEL SHANK TWIST DRILL- Dia 2.5 | Details as per Annexure II |
| 14 | PARALLEL SHANK TWIST DRILL- Dia 3 | Details as per Annexure II |
| 15 | PARALLEL SHANK TWIST DRILL - LONG SERIES- Dia 3 | Details as per Annexure II |
| 16 | PARALLEL SHANK TWIST DRILL- Dia 3.2 | Details as per Annexure II |
| 17 | PARALLEL SHANK TWIST DRILL- Dia 3.5 | Details as per Annexure II |
| 18 | PARALLEL SHANK TWIST DRILL- Dia 3.8 | Details as per Annexure II |
| 19 | PARALLEL SHANK TWIST DRILL- Dia 4 | Details as per Annexure II |
| 20 | PARALLEL SHANK TWIST DRILL- Dia 4.2 | Details as per Annexure II |
| 21 | PARALLEL SHANK TWIST DRILL- Dia 4.3 | Details as per Annexure II |
| 22 | PARALLEL SHANK TWIST DRILL- Dia 4.4 | Details as per Annexure II |
| 23 | PARALLEL SHANK TWIST DRILL- Dia 4.6 | Details as per Annexure II |
| 24 | PARALLEL SHANK TWIST DRILL- Dia 4.7 | Details as per Annexure II |
| 25 | PARALLEL SHANK TWIST DRILL- Dia 4.8 | Details as per Annexure II |
| 26 | PARALLEL SHANK TWIST DRILL- Dia 5 | Details as per Annexure II |
| 27 | PARALLEL SHANK TWIST DRILL- Dia 5.1 | Details as per Annexure II |
| 28 | PARALLEL SHANK TWIST DRILL- Dia 5.2 | Details as per Annexure II |
| 29 | PARALLEL SHANK TWIST DRILL- Dia 5.3 | Details as per Annexure II |
| 30 | PARALLEL SHANK TWIST DRILL- Dia 5.4 | Details as per Annexure II |
| 31 | PARALLEL SHANK TWIST DRILL- Dia 5.5 | Details as per Annexure II |
| 32 | PARALLEL SHANK TWIST DRILL- Dia 5.6 | Details as per Annexure II |
| 33 | PARALLEL SHANK TWIST DRILL- Dia 5.7 | Details as per Annexure II |
| 34 | PARALLEL SHANK TWIST DRILL- Dia 5.8 | Details as per Annexure II |
| 35 | PARALLEL SHANK TWIST DRILL- Dia 6 | Details as per Annexure II |
| 36 | PARALLEL SHANK TWIST DRILL- Dia 6.2 | Details as per Annexure II |
| 37 | PARALLEL SHANK TWIST DRILL- Dia 6.3 | Details as per Annexure II |
| 38 | PARALLEL SHANK TWIST DRILL- Dia 6.5 | Details as per Annexure II |
| 39 | PARALLEL SHANK TWIST DRILL- Dia 6.6 | Details as per Annexure II |
| 40 | PARALLEL SHANK TWIST DRILL- Dia 6.8 | Details as per Annexure II |
| 41 | PARALLEL SHANK TWIST DRILL- Dia 6.9 | Details as per Annexure II |
| 42 | PARALLEL SHANK TWIST DRILL- Dia 7 | Details as per Annexure II |
| 43 | PARALLEL SHANK TWIST DRILL- Dia 7.4 | Details as per Annexure II |
| 44 | PARALLEL SHANK TWIST DRILL- Dia 7.5 | Details as per Annexure II |
| 45 | PARALLEL SHANK TWIST DRILL- Dia 7.6 | Details as per Annexure II |
| 46 | PARALLEL SHANK TWIST DRILL- Dia 7.8 | Details as per Annexure II |
| 47 | PARALLEL SHANK TWIST DRILL- Dia 8 | Details as per Annexure II |
| 48 | PARALLEL SHANK TWIST DRILL- Dia 8.2 | Details as per Annexure II |
| 49 | PARALLEL SHANK TWIST DRILL- Dia 8.3 | Details as per Annexure II |
| 50 | PARALLEL SHANK TWIST DRILL- Dia 8.4 | Details as per Annexure II |
| 51 | PARALLEL SHANK TWIST DRILL- Dia 8.5 | Details as per Annexure II |
| 52 | PARALLEL SHANK TWIST DRILL- Dia 8.6 | Details as per Annexure II |
| 53 | PARALLEL SHANK TWIST DRILL- Dia 8.8 | Details as per Annexure II |
| 54 | PARALLEL SHANK TWIST DRILL- Dia 9 | Details as per Annexure II |
| 55 | PARALLEL SHANK TWIST DRILL- Dia 9.4 | Details as per Annexure II |
| 56 | PARALLEL SHANK TWIST DRILL- Dia 9.5 | Details as per Annexure II |
| 57 | PARALLEL SHANK TWIST DRILL- Dia 9.6 | Details as per Annexure II |
| 58 | PARALLEL SHANK TWIST DRILL- Dia 9.7 | Details as per Annexure II |
| 59 | PARALLEL SHANK TWIST DRILL- Dia 9.8 | Details as per Annexure II |
| 60 | PARALLEL SHANK TWIST DRILL- Dia 9.9 | Details as per Annexure II |
| 61 | PARALLEL SHANK TWIST DRILL- Dia 10 | Details as per Annexure II |
| 62 | PARALLEL SHANK TWIST DRILL- Dia 10.1 | Details as per Annexure II |
| 63 | PARALLEL SHANK TWIST DRILL- Dia 10.2 | Details as per Annexure II |
| 64 | PARALLEL SHANK TWIST DRILL- Dia 10.5 | Details as per Annexure II |
| 65 | PARALLEL SHANK TWIST DRILL- Dia 10.6 | Details as per Annexure II |
| 66 | PARALLEL SHANK TWIST DRILL- Dia 10.8 | Details as per Annexure II |
| 67 | PARALLEL SHANK TWIST DRILL- Dia 10.9 | Details as per Annexure II |
| 68 | PARALLEL SHANK TWIST DRILL- Dia 11.4 | Details as per Annexure II |
| 69 | PARALLEL SHANK TWIST DRILL- Dia 11.5 | Details as per Annexure II |
| 70 | PARALLEL SHANK TWIST DRILL- Dia 11.8 | Details as per Annexure II |
| 71 | PARALLEL SHANK TWIST DRILL- Dia 12 | Details as per Annexure II |
| 72 | PARALLEL SHANK TWIST DRILL- Dia 12.2 | Details as per Annexure II |
| 73 | PARALLEL SHANK TWIST DRILL- Dia 12.4 | Details as per Annexure II |
| 74 | PARALLEL SHANK TWIST DRILL- Dia 12.5 | Details as per Annexure II |
| 75 | PARALLEL SHANK TWIST DRILL- Dia 12.6 | Details as per Annexure II |
| 76 | PARALLEL SHANK TWIST DRILL- Dia 12.8 | Details as per Annexure II |
| 77 | PARALLEL SHANK TWIST DRILL- Dia 12.9 | Details as per Annexure II |
| 78 | PARALLEL SHANK TWIST DRILL- Dia 13 | Details as per Annexure II |
| 79 | HSS CENTER DRILL- A3.15 x 8 | Details as per Annexure II |
| 80 | HSS CENTER DRILL- A2.5 x 6.3 | Details as per Annexure II |
| 81 | HSS CENTER DRILL- A4X10 | Details as per Annexure II |
| 82 | HSS CENTER DRILL- A5X12.5 | Details as per Annexure II |
| 83 | HSS CENTER DRILL- A6.3X16 | Details as per Annexure II |
| 84 | HSS CENTER DRILL- A2X5 | Details as per Annexure II |
| 85 | HAND REAMER- 4H7 | Details as per Annexure II |
| 86 | HAND REAMER- 5H7 | Details as per Annexure II |
| 87 | HAND REAMER- 6H7 | Details as per Annexure II |
| 88 | HAND REAMER- 8H7 | Details as per Annexure II |
| 89 | HAND REAMER- 10H7 | Details as per Annexure II |
| 90 | HAND REAMER- 12H7 | Details as per Annexure II |
| 91 | HAND REAMER- 14H7 | Details as per Annexure II |
| 92 | HAND REAMER- 16H7 | Details as per Annexure II |
| 93 | HAND REAMER- 20H7 | Details as per Annexure II |
| 94 | MACHINE REAMER- 16H7 | Details as per Annexure II |
| 95 | MACHINE REAMER- 18H7 | Details as per Annexure II |
| 96 | MACHINE REAMER- 20H7 | Details as per Annexure II |
| 97 | MACHINE REAMER- 3H7 | Details as per Annexure II |
| 98 | HAND TAP SET- M4 X 0.7 | Details as per Annexure II |
| 99 | HAND TAP SET- M5 X 0.8 | Details as per Annexure II |
| 100 | HAND TAP SET- M6 X 1 | Details as per Annexure II |
| 101 | HAND TAP SET- M8X1.25 | Details as per Annexure II |
| 102 | HAND TAP SET- M10 X 1.50 | Details as per Annexure II |
| 103 | HAND TAP SET- M12 X 1.75 | Details as per Annexure II |
| 104 | HSS DIES and DIE NUT- M4 X 0.7 | Details as per Annexure II |
| 105 | HSS DIES and DIE NUT- M5 X 0.8 | Details as per Annexure II |
| 106 | HSS DIES and DIE NUT- M6 X 1 | Details as per Annexure II |
| 107 | HSS DIES and DIE NUT- M8X1.25 | Details as per Annexure II |
| 108 | HSS DIES and DIE NUT- M10 X 1.50 | Details as per Annexure II |
| 109 | HSS DIES and DIE NUT- M12 X 1.75 | Details as per Annexure II |
| 110 | HSS DIES and DIE NUT- M14 X 2 | Details as per Annexure II |
| 111 | HSS DIES and DIE NUT- M16 X 2 | Details as per Annexure II |
| 112 | HSS DIES and DIE NUT- M18 X 2.5 | Details as per Annexure II |
| 113 | HSS DIES and DIE NUT- M20 X 2.5 | Details as per Annexure II |
| 114 | END MILL CUTTER-SOLID CARBIDE, DIA - 3 | Details as per Annexure II |
| 115 | END MILL CUTTER-SOLID CARBIDE, DIA - 4 | Details as per Annexure II |
| 116 | END MILL CUTTER-SOLID CARBIDE, DIA - 5 | Details as per Annexure II |
| 117 | END MILL CUTTER-SOLID CARBIDE, DIA - 6 | Details as per Annexure II |
| 118 | END MILL CUTTER-SOLID CARBIDE, DIA - 8 | Details as per Annexure II |
| 119 | END MILL CUTTER-SOLID CARBIDE, DIA - 10 | Details as per Annexure II |
| 120 | END MILL CUTTER-SOLID CARBIDE, DIA - 12 | Details as per Annexure II |
| 121 | SLOT DRILL - SOLID CARBIDE, DIA - 5 | Details as per Annexure II |
| 122 | SLOT DRILL - SOLID CARBIDE, DIA - 6 | Details as per Annexure II |
| 123 | SLOT DRILL - SOLID CARBIDE, DIA - 8 | Details as per Annexure II |
| 124 | SLOT DRILL - SOLID CARBIDE, DIA - 10 | Details as per Annexure II |
| 125 | BALL NOSE CUTTER-SOLID CARBIDE, DIA - 12 | Details as per Annexure II |
| 126 | BALL NOSE CUTTER-SOLID CARBIDE, DIA - 10 | Details as per Annexure II |
| 127 | BALL NOSE CUTTER-SOLID CARBIDE, DIA - 8 | Details as per Annexure II |
| 128 | BALL NOSE CUTTER-SOLID CARBIDE, DIA - 6 | Details as per Annexure II |
| 129 | BALL NOSE CUTTER-SOLID CARBIDE, DIA - 4 | Details as per Annexure II |
| 130 | CHAMFER END MILL-SOLID CARBIDE, DIA - Dia 10X90 Degree | Details as per Annexure II |
| 131 | WOOD RUFF CUTTER-HSS, 19.5X6 | Details as per Annexure II |
| 132 | DOVE TAIL CUTTER-HSS, 30X45 Degree | Details as per Annexure II |
| 133 | LAPPING PASTE, 1 Pkt - 400GRM | Details as per Annexure II |
| 134 | ROUND DIE HANDLE - 1 inch | Details as per Annexure II |
| 135 | ROUND DIE HANDLE - 13 by 16 inch | Details as per Annexure II |
| 136 | ROUND DIE HANDLE - 1 and half inch | Details as per Annexure II |
| 137 | REMEAR and TAP HANDLE - SMALL | Details as per Annexure II |
| 138 | REMEAR and TAP HANDLE - MEDIUM | Details as per Annexure II |
| 139 | REMEAR and TAP HANDLE - LARGE | Details as per Annexure II |
| 140 | DEAD BLOW HAMMER - 2LBS | Details as per Annexure II |
| 141 | OIL STONE TRIANGULAR - 1 by 4 inch X 6 inch | Details as per Annexure II |
| 142 | PARALLAL CLAMP - 6 Inch | Details as per Annexure II |
| 143 | PARALLAL CLAMP - 4 Inch | Details as per Annexure II |
| 144 | DOWEL PIN - DIA 8X 50MM | Details as per Annexure II |
| 145 | DOWEL PIN - DIA 8X 100MM | Details as per Annexure II |
| 146 | DOWEL PIN - DIA 6X 45MM | Details as per Annexure II |
| 147 | DOWEL PIN - DIA 6X 30MM | Details as per Annexure II |
| 148 | DOWEL PIN - DIA 6X 50MM | Details as per Annexure II |
| 149 | TOOLMAKER VICE PIN TYPE - TMVP100 | Details as per Annexure II |
| 150 | GOOSE NECK CLAMP - NGC12 | Details as per Annexure II |
| 151 | STEPPED STRAP CLAMP - NSSC12-100 | Details as per Annexure II |
| 152 | MOULDING CLAMP-WITH CLAMPING T-BOLT and FLANGED NUT - NMC-12T | Details as per Annexure II |
| 153 | STEP BLOCK - NSB-2 | Details as per Annexure II |
| 154 | ADJUSTABLE SUPPORTS PLATES - NASP-250 | Details as per Annexure II |
| 155 | SINGLE POINT CUTTING TOOL BLANK-HSS - 1 by 2 inch X 1 by 2 inch X 6 inch | Details as per Annexure II |
| 156 | SINGLE POINT CUTTING TOOL BLANK-HSS - 1 by 4 inch X 1 by 4 inch X 6 inch | Details as per Annexure II |
| 157 | FACE MILL CUTTER - YGRD12-80Z7C27B | Details as per Annexure II |
| 158 | FACE MILL CUTTER - YGRD12-63Z6C22B | Details as per Annexure II |
| 159 | FACE MILL INSERTS - RDKT 12 04 MO | Details as per Annexure II |
