|
| 1 | Demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of Engineer- in-charge. |
| 2 | Banking excavated earth by mechanical / manual means in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ’/ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and for all lift : |
| 3 | By Manual Labour including loading, unloading and stacking for lead less than 8 KM |
| 4 | 1:5:10 (1 cement: 5 coarse sand (zone-III) derived from natural sources: 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | 12 mm cement plaster of mix ::1:4 (1 cement: 4 coarse sand) |
| 7 | Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.53 mm to 22.4 mm size stone aggregate |
| 8 | Supplying and stacking at site.Red bajri |
| 9 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density . |
| 10 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. |
| 11 | Raising & re-fixing of manhole including all material labor T&P etc. all complete. (NS) |
| 12 | Supply & fixing of R.C.C. manhole frame and cover including all complete. (NS) |
| 13 | Supply of R.C.C. Slab (900X450X150MM) with loading & unloading for site etc. |
| 14 | Fixing of R.C.C. Slab etc. |
| 15 | Supply & Fixing Granite Board 2.5\\"x4\\" Size Display Board including Painting, Lettering etc. all complete. (None Schedule) |
| 16 | Sub Total (A) |
| 17 | Add / Deduction For Estimate Figure Amount Match |
| 18 | Grand Total Please Enable Macros to View BoQ information |
