|
| 1 | CHAIR WRITING/CHAIR VISITOR (Drg No TP/FD/E6/MAP/01)Removing the old unserviceable back of Chair Writing Steel / Chair Visitor and S&F of new back (of same size) made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50 mm thick with PVC lipping all around along with welding of mettallic rail structure (where required) and fixing to the rail with screws 4mm thick alongwith washers as per sample approved complete all as specified and as directed. |
| 2 | Removing the old unserviceable seat of Chair Writing Steel / Chair Visitor and S&F of new seat (of same size) made of 12 mm hot pressed plywood upholstered with fabric and moulded polyurethane foam 50 mm thickness with PVC lipping all around along with welding of of mettallic rail structure where required and shall be fixed to the rail with screws 4mm thick alongwith washers as per sample approved complete all as specified and as directed. |
| 3 | Removing the old unserviceable handle / arm rest of Chair Writing Steel / Chair Visitor and S&F new handle of same size made of black integral skin polyurethane with reinforced MS insert and fixed to the rail with screws 4mm thick alongwith washers as per sample approved complete all as specified and as directed. |
| 4 | CHAIR SCHOOL WITH HAND BOARD (Drg No TP-Godrej/FD/E6/MAP/05)S&F PVC trough seat made of 4mm thick with 4x10 mm ribs moulded integrally and fixed to the frame with Aluminum alloy screws including removing feded/broken seat complete all as specified and as directed. |
| 5 | S&F 18 mm thick pre-laminated MDF Board of exterior grade OSD and edges with 1.5 mm thick PVC beading with wire nails as hand board including removing of old unserviceable Hand board complete all as specified and as directed. |
| 6 | M&L for Welding the disjointed MS plain bar shelf under the seat wherever required complete all as specified and as directed. |
| 7 | M&L for Painting the Steel frame of chair with two coats of black synthetic enamel paint over & including a coat of Red oxide primer complete all as specified and as directed. |
| 8 | S&F in replacement PVC shoe cap for Chair school with Hand board complete all as specified and as directed. |
| 9 | CHARPOY GI PIPE ( Drg No FD-220/CEKZ/TD/556)Removing the unserviceable ply /nylon/newar from the charpoy GI Pipe complete all as specified and as directed. |
| 10 | M&L for tightening the legs, junction points of long rail & short rail with pipe wrench, duly fixing with existing check nuts so that the item becomes stable complete all as specified and as directed. |
| 11 | S&F 32 mm dia GI Pipe medium grade long rail 1890 mm long duly threaded at the ends upto 22 mm size (as shown in drawings) including removing the old unserviceable long rail (whose threaded ends were broken either at one end or both) by loosing existing check nuts and elbows complete all as specified and as directed. |
| 12 | Removing existing unserviceable short rail (whose threaded ends were cracked) and fixing of 32 mm dia GI Pipe medium grade short rail of 813 mm long, 32mm dia made from GI pipe retrived from long rail i.e BoQ Serial item No.3.02, duly threaded at the ends upto 22 mm size (as shown in the drawingsa complete all as specified and as directed. Note : Ref drawing No FD-220 and CEKZ/TD/556 |
| 13 | Removing existing unserviceable leg (whose threadred ends were cracked) and fixing of 32 mm dia GI Pipe medium grade leg of 410 mm long, 32mm dia GI pipe retrived from long rail/short rail i.e BOQ Serial item No.3.02 & 3.03, duly provided with 6 mm thick MS base plate duly welded & painted with two coats of black paint as shown in the drawing complete all as specified and as directed. |
| 14 | S&F in replacement 32mm dia, 3 way elbow (ISI marked) for the joints of long /short rails as shown in the drawing complete all as specified and as directed. |
| 15 | S&F in replacement 6mm thick check nut for the corner joints of long/short rails as shown in the drawing complete all as specified and as directed |
| 16 | S&F 25mm dia medium grade GI pipe short rail of 890 mm long duty welded the ends to the long rail at equal distance as shown in the drawing for resting the ply top on charpoy GI and S&F 6mm thick MS Plate size (120mm x 20mm) duly welded and painted to enable connecting 25mm dia GI pipe & 32 mm dia GI pipe from undeneath rails for better grip while placing the ply top complete all as specified and as directed. |
| 17 | S&F 12mm thick BWR Grade Ply wood of size 6'6\\" x 3’0\\" over the Long rails & short rails through drilling holes in ply top and fixed with nickel Nut, bolt and washer. The edges of ply should be applied mixture of french chalk powder shellac & solvent and added colour for smooth finish irrespective of drawing complete all as specified and as directed. |
| 18 | TABLE CLERK STEEL/ TYPIST STEEL(Drg No FD-84(M)/381/1004/1005)S&F in replacement drawer of Table Clerk Steel and Typist Steel (as per sample) including M&L for applying two coats of olive green paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 19 | S&F in replacement 19mm thick pre laminated MDF Board exterior grade on table top of Table Clerk Steel and Typist steel with 2 mm thick PVC beading alround the top complete all as specified and as directed. |
| 20 | Preparation of old painted steel surfaces of Table Office Clerk Steel / Typist Steel by scraping with emery paper, cleaning, re-dusting, making the surface smooth and M&L for applying one coat of synthetic enamel paint of approved shade as per direction complete all as specified and as directed. |
| 21 | S&F in replacement 25 mm Square MS pipe of 16 guage thick standard steel for Tables complete all as specified and as directed. |
| 22 | S&F in replacement hard rubber shoes of steel table's legs complete all as specified and as directed. |
| 23 | S&F in replacement 4 lever lock with flat type SS key in duplicate for Steel Tables Office Clerk Steel complete all as specified and as directed. |
| 24 | S&F in replacement PVC receased handles for Steel Tables Drawer complete all as specified and as directed. |
| 25 | TABLE OFFICE OFFICER STEEL (Drg No FD-84(M)/1002/1003)S&F in replacement drawer of Table Office Officer Steel including M&L for applying two coats of synthetic enamel paint (colour/shed as approved) over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 26 | S&F in replacement 19mm thick pre laminated MDF Board exterior grade a on table top of Table Office Officer Steel with 2mm thick teakwood beading alround the top complete all as specified and as directed. |
| 27 | Preparation of old painted steel surfaces of Table Office Officer Steel by scraping with emery paper, cleaning, re-dusting, making the surface smooth including M&L for applying one coat of synthetic enamel paint of approved colour complete all as specified and as directed. |
| 28 | S&F in replacement 25 mm Square MS pipe of 16 guage thick standard steel for Tables complete all as specified and as directed. |
| 29 | S&F in replacement hard rubber shoes for table legs complete all as specified and as directed. |
| 30 | S&F in replacement 4 lever lock with flat type SS key in duplicate for Tables Office Steel complete all as specified and as directed. |
| 31 | S&F in replacement PVC receased handles for Steel Tables Drawer complete all as specified and as directed. |
| 32 | CHAIR CB STEEL WITH OR WITHOUT ARMS (Drg No FD-75(M))S&F 25 mm dia, 16 Gauge thick MS conduit pipe of required length/size to be fixed duly arc welded and level the surface to make smooth including M&L for applying one coat of Red oxide zinc chrome primer including dismantling the rusted/damaged leg/seat/back rest frame carefully without disturbing the adjoining parts of Chair CB steel with arms and without arms complete all as specified and as directed. |
| 33 | Preparation of surface by scraping old surfaces with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces including M&L for applying two coats of synthetic enamel paint (colour/shade as approved) over & including a coat of red oxide primer complete all as specified and as directed. |
| 34 | S&F in replacement Seat frame made out of Ist class Teak Wood and canned with 2 mm wide and 0.4 mm thick gola type of approved colour and 4 mm wide thick cane for borders and the frames shall be polished or painted as required to match the existing and fixed with 4 Nos GI Nut and bolts of size 3\\" long with washers for Chair CB steel with arms and without arms complete all as specified and as directed. |
| 35 | All as per BOQ Serial item No.6.02 above but Back frame complete all as specified and as directed. |
| 36 | S&F in replacement Arm rest made out of Ist class Teak wood duly french polished (colour/shade as approved)and fixed with MS screw complete all as specified and as directed. |
| 37 | S&F in replacement hard rubber bush with MS screw for Chair CB steel with arms and without arms complete all as specified and as directed. |
| 38 | S&F in replacement hard rubber cap for rear leg top side to be fixed for open end of the conduit pipe of Chair CB steel with arms and without arms complete all as specified and as directed. |
| 39 | ALMIRAH LARGE STEEL (Drg No :- FD-67/109M)/114 (M)/351/1031/1033/FD/E6/MAP/18)S&F in replacement 6 lever lock with duplicate flat key (2 Nos of key) with existing size fixed with screw/ welding to shutter of Almirahs complete all as specified and as directed. |
| 40 | S&F in replacement 3-way assembly including 6mm thick round bar with necessary fittings of approved quality for Almirah complete all as specified and as directed. |
| 41 | S&F in replacement handle of Godrej pattern with necessary fixing accessories of approved quality complete all as specified and as directed. |
| 42 | S&F in replacement bottom made out of 1mm thick MS sheet made to shape and size as per drawings and fixing by welding matching with existing almirah including M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 43 | S&F in replacement leg made out of 1mm thick of MS sheet and fixed with welding/riveteting at the bottom portion (as per existing size) including M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 44 | S&F in replacement MS hinges or U clips of same shape & size as existing duly welded complete all as specified and as directed. |
| 45 | S&F in replacement shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts complete all as specified and as directed. |
| 46 | Taking down of door shutter of Almirah and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges complete all as specified and as directed. |
| 47 | Taking down of existing dented shelves from Almirah steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 48 | ALMIRAH MEDIUM STEEL (Drg No :- FD-110(M)/ 108(M))/ 243/350/1032/1034)S&F in replacement 6 lever lock with duplicate flat key (2 Nos of key) with existing size fixed with screw/ welding to shutter of Almirahs complete all as specified and as directed. |
| 49 | S&F in replacement 3-way Assembly including 6mm thick round bars with necessary fittings of approved quality for Almirah complete all as specified and as directed. |
| 50 | S&F in replacement handle of Godrej pattern with necessary fixing accessories of approved quality complete all as specified and as directed. |
| 51 | S&F in replacement bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah including M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 52 | S&F in replacement leg made out of 1mm thick of MS sheet and fixed with welding/riveteting for the bottom portion as per existing size including M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 53 | S&F in replacement MS hinge or U clips of same shape & size as existing in steel almirah duly welded complete all as specified and as directed. |
| 54 | S&F in replacement shelve made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts complete all as specified and as directed. |
| 55 | Taking down of door shutter of Almirah and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges complete all as specified and as directed. |
| 56 | Taking down of existing dented shelve from Almirahs steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including two coat of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 57 | LOCKER/LOCKER BED SIDE STEEL (Drg No :- FD-1029/257)S&F in replacement 6 lever lock with duplicate flat key (2 Nos of keys) with existing size fixed with screw/ welding to shutter of Almirahs complete all as specified and as directed. |
| 58 | S&F in replacement hasp and staple duly welded/screwed complete all as per drg and directed. |
| 59 | S&F in replacement handle of Godrej pattern with necessary fixing accessories of approved quality complete all as specified and as directed. |
| 60 | S&F in replacement bottom made out of 1mm thick MS sheet made to shape and size on drawing and fixing by welding matching with existing almirah including M&L for applying two coats of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 61 | S&F in replacement MS hinges or U clips of same shape & size as per existing in steel almirah duly welded complete all as specified and as directed. |
| 62 | S&F in replacement shelves made out of 1mm thick MS sheet made to shape and size on drawing and fixing with cleats, nuts and bolts complete all as specified and as directed. |
| 63 | Taking down of door shutter of locker and bringing the item to the original shape and refixing the repaired door shutters with suitable hinges complete all as specified and as directed. |
| 64 | Taking down of existing dented shelves from Locker steel bringing the item to the original shape and refixing the shelves with necessary cleats/nuts/bolts including M&L for applying two coat of synthetic enamel paint over & including a coat of red oxide zinc chrome primer complete all as specified and as directed. |
| 65 | RACK SHOE STEEL (Drg No :FD/E6/MAP/02/FD/E6/MAP/02(R))S&F 25 mm dia, 16 Gauge MS conduit pipe of required length/size to be fixed including dismantling the damaged leg frame carefully without disturbing the adjoining parts complete all as specified and as directed. |
| 66 | S&F 6 mm dia MS rod of required length/size including dismantling the damaged shelf (frame) carefully without disturbing the adjoining parts complete all as specified and as directed. |
| 67 | Preparation of old steel surfaces by scraping with emery paper, cleaning, reducing, making the surfaces smooth and applying putty wherever required including M&L for applying one coat of synthetic enamel paint of black shade of approved make & quality complete all as specified and as directed. |
| 68 | CHARPOY WITH HARDTOP (Drg No FD/MAP-II/01)S&F in replacement long rail of 25x65 mm, 16 Gauge thick MS Tube of required length/size complete all as specified and as directed. |
| 69 | All as per BOQ Serial item No.11.00 above but 32x32 mm, 16 Gauge thick MS Tube of required length/size complete all as specified and as directed. |
| 70 | All as per BOQ Serial item No.11.00 above but 25x25 mm, 16 Gauge thick MS Tube of required length/size complete all as specified and as directed. |
| 71 | S&F in replacement 12mm thick BWR Grade Ply wood of size 6'6\\" x 3’0\\" over the long rails & short rails fixed with nickel Nut, bolt and washer. The edges of ply should be applied mixture of french chalk powder shellac & solvent and added colour for smooth finish irrespective of drawing complete all as specified and as directed. |
| 72 | Preparation of old steel surfaces by scraping with emery paper, cleaning, reducing, making the surfaces smooth and applying putty wherever required including M&L for applying one coat of synthetic enamel paint of black shade of approved make & quality complete all as specified and as directed. |
| 73 | S&F in replacement Hard rubber toe complete all as specified and as directed. |
| 74 | All as per BOQ Serial item No.11.00 above but short rail complete all as specified and as directed. |
| 75 | BED HARD STEEL (Drg No : FD/E6/MAP/08,)Removing of old paint and preparing surface by applying putty and M&L for applying one coat of red oxide primer after welding wherever required (legs/rails) including M&L for applying two coats of synthetic enamel paint black colour to match as per standard drawing complete all as specified and as directed. |
| 76 | Removing of old/unserviceable ply top from Bed Hard Steel and S&F 12mm thick BWR plywood of exterior grade and fixing the same with screws 4mm thick alongwith washers including S&F of new hard rubber shoes (4 Nos) for each bed complete all as specified and as directed. |
| 77 | Removing of old/unserviceable head board and S&F head board made out of pre laminated MDF board 18 mm exterior grade, face and PVC edging all around as shown on drawing complete all as specified and as directed. |
| 78 | Removing of old/unserviceable foot board and S&F foot board made out of pre laminated MDF board 18 mm exterior grade, teak face and PVC edging all around as shown on drawing complete all as specified and as directed. |
| 79 | CHAIR COMPUTER/ REVOLVING (Drg No : TP-Godrej/Aristo/Raj & Raj and FD/E6/MAP/01)S&F in replacement twin castor wheel of size 50mm dia (as per sample) of Chair computer / revolving low or high back after complete all as specified and as directed. |
| 80 | S&F in replacement stainless steel pedestal assembly complete all as specified and as directed. |
| 81 | S&F in replacement acrylic fabric for seat and back (as per approved colour and shade) and S&F transparent plastic dust sheet covers for seat and back complete all as specified and as directed. Note: (i) Unit shall be for one seat and back.(ii) Rate of cloth should not be less than 420.00 per sqm. |
| 82 | S&F in replacement gas lift rod with proper adjusting tilt complete all as specified and as directed. |
| 83 | S&F in replacement arm rest pair complete all as specified and as directed. |
| 84 | S&F in replacement Polyurethane foam of 50 mm thick of density 40 best quality for seat and back with pvc lipping complete all as specified and as directed. |
| 85 | CHAIR EASY (CUSHIONED) STEEL (Drg No :-FD-121 (M) ) S&F in replacement Leg of 19 mm square MS pipe 16 gauge, length 510 mm complete all as specified and as directed. |
| 86 | S&F in replacement Seat base rail of 19 mm square MS pipe 16 gauge of length 700 mm and complete all as specified and as directed. |
| 87 | S&F in replacement teak wood hand rest of size 19 mm x 65 mm of length 700 mm duly french polished and fixed with screws and complete all as specified and as directed. |
| 88 | S&F in replacement 50 mm thick, 40 D foam of size 560 mm x 635 mm, duly covered with approved shade leatherite over the existing 12 mm thick Teak wood plank (as per drg of seat base) complete all as specified and as directed.Note : Cost of leatherite cloth shall not be less than Rs 350.00 per mtr. |
| 89 | S&F in replacement 25 mm thick, 40 D foam of size 560 mm x 355 mm, duly covered with approved shade leatherite over the existing 12 mm thick Teak wood plank (as per drg of back rest) complete all as specified and as directed. Note : Cost of leatherite cloth shall not be less than Rs 350.00 per mtr. |
| 90 | S&F and jointing of 20 mm X 3 mm MS Flat iron cleat between hand rest and MS square pipes with steel screws and complete all as specified and as directed. |
| 91 | S&F metal clamp at back side of seat rest to be refixed with steel srews and complete all as specified and as directed. |
| 92 | S&F in replacement hard rubber shoes (as per sample) complete all as specified and as directed. |
| 93 | TABLE COMPUTER (Drg No :- FD/E6MAP/03)S&F in replacement 18mm Pre-laminated MDF board (900x600mm) for table top with 2mm PVC beading, all as shown on drg complete all as specified and as directed. |
| 94 | S&F in replacement powder coated telescopic steel channel in black paint for key board plank all as shown on drg complete all as specified and as directed. |
| 95 | S&F in replacement 18mm pre-laimnated MDF board for keyboard tray with matching PVC edging all around of table Computer, all as shown on drg complete all as specified and as directed. |
| 96 | Removal of existing worn out painting from in side & outside including prepartion of surface of the frame and M&L for applying two coats of synthetic enamel black paint over & including a coat of red oxide primer all as shown on drg complete all as specified and as directed. |
| 97 | TABLE BEDSIDE STEEL MAP (Drg No FD/E6/MAP/15 ®)S&F in replacement table top of 18mm thick exterior grade prelaminated MDF board of existing shade both side laminated; with shade as approved complete all as specified and as directed. |
| 98 | S&F in replacement side of table bed sidewith 18mm thick exterior grade prelaminated MDF board of existing shade both side laminated; shade as approved complete all as specified and as directed. |
| 99 | S&F in replacement telescopic channel of table bed side for smooth functioning complete all as specified and as directed. |
| 100 | M&L for applying 2 coats of synthetic enamel paint (colour/shade as approved) to steel surfaces of table bed side complete all as specified and as directed. |
| 101 | S&F in replacement knob as approved complete all as specified and as directed. |
| 102 | S&F in replacement hard rubber shoe as approved complete all as specified and as directed. |
| 103 | CHAIR VARENDAH (MS) (Drg No FD-19,256, 359) S&F in replacement 20 mm dia, 16 Gauge thick, MS conduit pipe of required length/size to be fixed duly arc welded and level the surface to make smooth including M&L for applying one coat of Red oxide zinc chrome primer complete all as specified and as directed. |
| 104 | S&F in replacement MS rod of 10 mm dia as connector of the front legs for Chair Verandah MS complete all as specified and as directed. |
| 105 | Removing of worn-out unserviceable cane & preparation of surface for painting by scraping old /fainted paint with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces and there after M&L for applying two coats of synthetic enamel paint (of approved shade) complete all as specified and as directed. |
| 106 | S&F caning with approved shade of plastic cane of 4 mm wide, 0.5 mm thick half-round as per Godrej pattern white in colour as shown in the drawing \\"Mat pattern\\" complete all as specified and as directed. |
| 107 | S&F in replacement PVC shoe cap for chair verandah MS complete all as specified and as directed. |
| 108 | TEAPOY VARENDAH (Drg No :FD-255/FD/E6/MAP/17)S&F in replacement 20 mm dia, 16 Gauge thick MS conduit pipe of required length/size to be fixed complete all as specified and as directed. |
| 109 | S&F in replacement 19 mm thick pre laminated MDF board exterior grade as table top with 2mm thick PVC beading all round the top complete all as specified and as directed. |
| 110 | Preparation of surfaces by scraping old /fainted paint with sand paper/ machine or emery paper as applicable to make surface smooth and filing uneven gaps with putty there by make equal level with adjacent surfaces including M&L for applying two coats of synthetic enamel paint of approved shade complete all as specified and as directed. |
| 111 | S&F in replacement hard rubber toe complete all as specified and as directed. |
| 112 | CHARPOY IP FOLDING (Drg No FD-388R):- S&F in replacement 12 mm thick plywood top BWR grade complete all as specified and directed. |
| 113 | S&F in replacement hard rubber shoe std quality complete all as specified and as directed. |
| 114 | M&L for welding work n. exc 2.5cm in length thickness of metal to be welded n exc 6 mm wherever required complete all as specified and as directed. |
| 115 | PAINTING :Almirah Large Steel with Shelves/ Almirah Large 1/2 H 1/2 SH :-Preparation of old steel surfaces before painting by paint remover / scraping with emery paper, cleaning, removal of dent, making the surfaces smooth and M&L for applying putty wherever required including M&L for applying two coats of synthetic enamel paint (colour/shade as approved) inside and out side over & including a coat of red oxide primer through spray machine of Almirah large steel with shelves complete all as specified and as directed. NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-67/109M)/114 (M)/351/ 1031/ 1033 /FD/E6/MAP/18 |
| 116 | All as per BOQ Serial item No.20.00 above but of Almirah medium steel with shelves and complete all as specified and as directed.NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-243/1032 |
| 117 | All as per BOQ Serial item No.20.00 above but Almirah large glazed steel with shelves and complete all as specified and as directed.NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-104(M) |
| 118 | All as per BOQ Serial item No.20.00 above but Almirah medium steel with shelves 1/2H, 1/2SH and complete all as specified and as directed.NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-114 |
| 119 | All as per BOQ Serial item No.20.00 above but Book Shelf Open large steel and complete all as specified and as directed.NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-69(M) |
| 120 | All as per BOQ Serial item No.20.00 above but Rack Side 3/4 spaces steel and complete all as specified and as directed.NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No TP |
| 121 | All as per BOQ Serial item No.20.00 above but Rack Side with tray (size 711x685x254mm) steel and complete all as specified and as directed.NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-97(M)/FD-1023 |
| 122 | All as per BOQ Serial item No.20.00 above but Locker steel and complete all as specified and as directed.NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-1029 |
| 123 | All as per BOQ Serial item No.20.00 above but Rack steel adj 6 tier and complete all as specified and as directed.NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-1038 |
| 124 | All as per BOQ Serial item No.20.00 above but Table bed side steel and complete all as specified and as directed. NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-76/133M/157 |
| 125 | All as per BOQ Serial item No.20.00 above but Stool steel and complete all as specified and as directed.NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-81 |
| 126 | All as per BOQ Serial item No.20.00 above but Step steel 2/3 tier and complete all as specified and as directed. NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-131 |
| 127 | All as per BOQ Serial item No.20.00 above but Locker steel 3/4 unit and complete all as specified and as directed. NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-127 |
| 128 | All as per BOQ Serial item No.20.00 above but Locker steel 6 unit (size 1455 MM (H) x 930 Mm (L) x 430 mm (W)) and complete all as specified and as directed. NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-127 |
| 129 | All as per BOQ Serial item No.20.00 above but Locker Bedside steel (internal & external) and complete all as specified and as directed. NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-1029/257. |
| 130 | All as per BOQ Serial item No.20.00 above but Bed Hard steel and complete all as specified and as directed. NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD/E6/MAP/08 |
| 131 | All as per BOQ Serial item No.20.00 above but Chair easy cushioned steel and complete all as specified and as directed. NOTE:- (i) Work shall be executed where the furniture article exist in different users unit, Md accn of AoR of GE Alipore and BSO's furniture yard as directed.(ii) Ref drawing No FD-121 Please Enable Macros to View BoQ information |
