Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Transplantation of trees including trimming the branches of full grown trees as per the requirement, giving the wax treatment of the trimmed area of branches, uprooting the tree and transporting the uprooted tree to the specified site of the transplantation as directed by the engineer-in-charge upto 12 km lead including all lifts, transplanting the uprooted tree by digging a required size of pit, filling it with freshgarden soil and manure as per the requirement and maintaing it for a period of 4 months by watering, weeding, manuring etc complete. A) Trees having trunk girth upto 1.0 metre |
| 2 | Transplantation of trees including trimming the branches of full grown trees as per the requirement, giving the wax treatment of the trimmed area of branches, uprooting the tree and transporting the uprooted tree to the specified site of the transplantation as directed by the engineer-in-charge upto 12 km lead including all lifts, transplanting the uprooted tree by digging a required size of pit, filling it with freshgarden soil and manure as per the requirement and maintaing it for a period of 4 months by watering, weeding, manuring etc complete. B) Trees having trunk girth more than 1.0 metre upto 1.5 meter |
| 3 | Transplantation of trees including trimming the branches of full grown trees as per the requirement, giving the wax treatment of the trimmed area of branches, uprooting the tree and transporting the uprooted tree to the specified site of the transplantation as directed by the engineer-in-charge upto 12 km lead including all lifts, transplanting the uprooted tree by digging a required size of pit, filling it with freshgarden soil and manure as per the requirement and maintaing it for a period of 4 months by watering, weeding, manuring etc complete. D) Trees having trunk girth more than 2.0 metre |
| 4 | Dismantling of existing structures comprising of masonry, Cement Concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, stacking the serviceable material with all lifts and lead up to 1000 meters, as per Section 200 of the specifications. Removing all type of R.C.C. Hume pipes and stacking within a lead up to 1000 meters including earthwork and dismantling of masonry works around pipes. Up to 600 mm dia |
| 5 | Dismantling of existing structures comprising of masonry, Cement Concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, stacking the serviceable material with all lifts and lead up to 1000 meters, as per Section 200 of the specifications. Removing all type of R.C.C. Hume pipes and stacking within a lead up to 1000 meters including earthwork and dismantling of masonry works around pipes. Above 600 mm to 900 mm dia |
| 6 | Dismantling of existing structures comprising of masonry, Cement Concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, stacking the serviceable material with all lifts and lead up to 1000 meters, as per Section 200 of the specifications. Removing all type of R.C.C. Hume pipes and stacking within a lead up to 1000 meters including earthwork and dismantling of masonry works around pipes. Above 900 mm dia |
| 7 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 meter, stacking serviceable and unserviceable materials separately and as per relevant clauses of section-200. By Mechanical Means Bituminous courses |
| 8 | Dismantling of flexible pavements and disposal of dismantled materials up to a lead of 1000 meter, stacking serviceable and unserviceable materials separately and as per relevant clauses of section-200. By Mechanical Means Granular courses |
| 9 | Dismantling of Cement Concrete Pavement Dismantling of Cement Concrete pavement by mechanical means including breaking to pieces not exceeding 0.02 Cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead up to 1000 meters, stacking serviceable and unserviceable materials separately as per Section-200 of the specifications. Dismantling of CC Road |
| 10 | Dismantling of CI water pipe line up to 600 mm dia. including disposal with all lifts and lead up to 1000 meters and stacking of serviceable material and unserviceable material separately. Dismantling of CI Water |
| 11 | Dismantling of existing structures comprising of masonry, Cement Concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, stacking the serviceable material with all lifts and lead up to 1000 meters, as per Section 200 of the specifications. Tile Work/Brick Masonry by Mechanical Means, House brickwork, Otla, Boundary wall |
| 12 | Dismantling of existing structures comprising of masonry, Cement Concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, stacking the serviceable material with all lifts and lead up to 1000 meters, as per Section200 of the specifications. By Mechanical Means Prestressed / Reinforced cement concrete grade M-20 & above Roof, Columns, Beam, Otla concreting |
| 13 | Dismantling of existing structures comprising of masonry, Cement Concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material, stacking the serviceable material with all lifts and lead up to 1000 meters, as per Section200 of the specifications. By Mechanical Means Plain Cement Concrete Grade M-15 & M-20 Ramp, Otla |
| 14 | Transportation By Mechanical means including loading, unloading and stacki 5 km or Part thereofng where ever necessary Excavated EarthTotal transportation of material |
| 15 | Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets,welding etc. including dismembering and stacking within 50 meters lead. Shop shutters Entrance gate |
| 16 | Excavation for roadwork in soil with hydraulic excavator including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location with all lifts and lead up to 1000 m as per Section-300 of the specifications.Excavation by Mechanical Means |
| 17 | Construction of Embankment/Sub-grade/Earthen Shoulders with material obtained from other sources, as per provisions of Section 305 of the specifications, with approved materials/soil confirming to requirements given in Table 301-1 of specifications including all lead and lifts, including cost of watering, compaction by vibratory roller/heavy pneumatic type roller etc. confirming to requirements given in Table 3012 of the specifications complete. |
| 18 | Crusher Run Macadam BaseProviding crushed stone aggregate, depositing on a prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller including all leads and lifts confirming to Section 407 of specifications to form a layerof Base. By Mixing Plant: For 53 mm maximum size |
| 19 | Construction of Dry Lean Cement Concrete Sub- Base Over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 26.5mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per Table 600-1 of the specifications, cement content not to be less than 150 Kg/Cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 MPa at 7 days, mixed in a batching plant, transported to site, laid with paver with electronic sensor/mechanical paver, compacting with 8-10 tonnes vibratory roller, finishing and curing and as per Section 601 of specifications. |
| 20 | Dowel jointed, Plain Cement Concrete PavementConstruction of Dowel jointed, Plain Cement Concrete Pavement in M-30 Grade Concrete over a prepared sub base with 43 or higher grade cement, coarse and fine aggregate conforming to IS:383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver with electronic sensor spreading the concrete by shovels, rakes compacted using needle, screed and plate vibrator and finished in a continuous operation including provision of contraction, expansion, and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, placing of dowel bar, tie rod admixtures as approved, curing compound, finishing to lines and grades as per approved drawings as per IRC:15 and as per Section-602 of the specifications complete excluding cost of steel in dowel bar and tie rod etc. |
| 21 | Add extra for the cost of steel in dowel bar and tie bar etc. required as per design. Mild Steel dowel bars confirming to IS 432, grade I |
| 22 | Add extra for the cost of steel in dowel bar and tie bar etc. required as per design. HYSD tie bars of Fe 500 grade confirming to IS 1786 |
| 23 | Crusher Run Macadam BaseProviding crushed stone aggregate, depositing on a prepared surface by hauling vehicles, spreading and mixing with a motor grader, watering and compacting with a vibratory roller including all leads and liftsconfirming to Section 407 of specifications to form a layerof Base. By Mixing Plant: For 53 mm maximum size GSB filling for Foothpath |
| 24 | Providing and laying factory made Coloured Chamfered Edge Cement Concrete Paver Blocks of required strength, thickness and size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick compacted bed of stone dust, compacting and proper embedding/laying of inter locking paver blocks into the bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand including locking edges with M 15 Cement Concrete 80mm thick C.C. paver block of M-35 grade withapproved colour, design and pattern. Paver block for foothpath both side |
| 25 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement concrete grade M-10 (Nominal Mix) with 20 mm maximum size of stone aggregate |
| 26 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 27 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc.above plinth level and up to floor two level excluding cost of centering, shuttering and reinforcement etc. Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate. |
| 28 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding upto floor level including cost of binding wire, wastage and over laps upto 12mm horizontal/ inclined position of reinforcement bars in slab and beams, plinth, chajjas, lintels, upto 4.5m vertical length of reinforcement in wall columns (over laps shall be provided as per requirement of IS : 13920; IS 456 & SP : 34) etc. complete. Thermo-Mechanically Treated bars. (Fe 500 D or more) |
| 29 | Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : Suspended floors, roofs, landings, balconies and access platform. |
| 30 | Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for : Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc |
| 31 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 32 | Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. ISA angle 100X100X12mm for Electrical cabling |
| 33 | Providing and Laying non-pressure (NP3) RCC socket & spigot pipes with rubber gasket joint including testing of joints. 450 mm dia |
| 34 | Providing & fixing of precast reinforced cement concrete manhole cover and frame including cost of transporting at site and all material etc. complete. 560 x 900 mm size extra heavy duty Manhole cover for Ic chamber Manhole cover for Electric Line Chamber |
| 35 | Providing & fixing of precast reinforced cement concrete manhole cover and frame including cost of transporting at site and all material etc. complete. 560 x 560 mm size extra heavy duty |
| 36 | Providing, Laying & Jointing of DWC (double wallcorrugated) PE Pipes of renowned duly tested inclusiveof all cost of inspection charges, transpotation charges,transit insuranse, loading/ unloading and stacking at site/store etc, complete. 150 mm/ 180 mm |
| 37 | Providing, Laying & Jointing of DWC (double wallcorrugated) PE Pipes of renowned duly tested inclusiveof all cost of inspection charges, transpotation charges,transit insuranse, loading/ unloading and stacking at site/store etc, complete. 170 mm/ 200 mm |
| 38 | Excavation for pipe laying (exceeding 30 cm in depth) including disposal of excavated earth with all lift and lead up to 50 m, disposed earth to be levelled and neatly dressed. All kinds of soil |
| 39 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE)\ confirming to IS 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 315 mm dia 8 Kg/sq.cm |
| 40 | Providing and laying Bend 90ْ confirming to IS specifications. 315 mm dia 8 Kg/sq.cm |
| 41 | Providing and laying Bend 45ْ confirming to IS specifications. 315 mm dia 8 Kg/sq.cm |
| 42 | Providing and laying Equal Tee confirming to IS specifications. 315 mm dia 8 Kg/sq.cm |
| 43 | Providing and laying Pipe end confirming to IS specifications. 315 mm dia 8 Kg/sq.cm |
| 44 | Providing and laying Reducer 8 kg/sq.cm : confirming to IS specifications. 315 mm dia 8 Kg/sq.cm |
| 45 | Providing butt fusion welded joint/jointing by heating to the ends with the help of Teflon coated electric mirror/heater ends together etc. by thermosetting process to HDPE Pipe and specials. (6kg, 8kg, 10kg) (50mm & above fusion jointed & below 50mm mechanical jointed) 315 mm dia |
| 46 | Providing and laying End Cap confirming to IS specifications. 315 mm dia 8 Kg/sq.cm |
| 47 | Providing, Supplying and laying Blue MDPE (medium density polyethylene) pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like CIPET (India) and other recognised agencies for usage in Drinking Water System. The cost shall include testing of all materials, Inspection charges, transportation upto site,transit insurance, loading, unloading, stacking etc. complete. 20 mm dia |
| 48 | Providing, Supplying and laying Blue MDPE (medium density polyethylene) pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like CIPET (India) and other recognised agencies for usage in Drinking Water System. The cost shall include testing of all materials, Inspection charges, transportation upto site,transit insurance, loading, unloading, stacking etc. complete. 25 mm dia |
| 49 | Providing, Supplying and fixing of Electro Fusion Tapping Ferrule (Branch Tapping Saddle) female BSP Threaded with SS 304 insert fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE 100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR 11 with min PN 12.5 rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. 63x15mm |
| 50 | Providing, Supplying and fixing of Electro Fusion Tapping Ferrule (Branch Tapping Saddle) female BSP Threaded with SS 304 insert fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE 100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR 11 with min PN 12.5 rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. 63x20mm |
| 51 | Providing, Supplying and fixing of Electro Fusion Tapping Ferrule (Branch Tapping Saddle) female BSP Threaded with SS 304 insert fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE 100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR 11 with min PN 12.5 rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. 315x20mm |
| 52 | Providing, Supplying and fixing of Electro Fusion Tapping Ferrule (Branch Tapping Saddle) female BSP Threaded with SS 304 insert fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE 100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rating SDR 11 with min PN 12.5 rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. 315x20mm |
| 53 | Providing, Supplying and fixing of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shallbe tested as per ISO:3459, ISO : 3501 & ISO: 3503, suitable for drinking water & approved by certified agencies, in food grade polypropylene and shall be inclusive of all cost of inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Metal inserted Compression Female Threaded Adaptor with SS 304 Material 20x15mm |
| 54 | Providing, Supplying and fixing of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shallbe tested as per ISO:3459, ISO : 3501 & ISO: 3503, suitable for drinking water & approved by certified agencies, in food grade polypropylene and shall be inclusive of all cost of inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Metal inserted Compression Female Threaded Adaptor with SS 304 Material 25x20mm |
| 55 | Providing, Supplying and fixing of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shallbe tested as per ISO:3459, ISO : 3501 & ISO: 3503, suitable for drinking water & approved by certified agencies, in food grade polypropylene and shall be inclusive of all cost of inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Metal inserted Compression Male Threaded Adaptor with SS 304 Material 20x15mm |
| 56 | Providing, Supplying and fixing of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shallbe tested as per ISO:3459, ISO : 3501 & ISO: 3503, suitable for drinking water & approved by certified agencies, in food grade polypropylene and shall be inclusive of all cost of inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Metal inserted Compression Male Threaded Adaptor with SS 304 Material 25x20mm |
| 57 | Providing, Supplying and fixing of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shallbe tested as per ISO:3459, ISO : 3501 & ISO: 3503, suitable for drinking water & approved by certified agencies, in food grade polypropylene and shall be inclusive of all cost of inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete Compression 90 Deg. Elbow threaded male off take in Metal 20x15mm |
| 58 | Providing, Supplying and fixing of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shallbe tested as per ISO:3459, ISO : 3501 & ISO: 3503, suitable for drinking water & approved by certified agencies, in food grade polypropylene and shall be inclusive of all cost of inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete Compression 90 Deg. Elbow threaded male off take in Metal 25x20mm |
| 59 | Providing, Supplying and fixing of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shallbe tested as per ISO:3459, ISO : 3501 & ISO: 3503, suitable for drinking water & approved by certified agencies, in food grade polypropylene and shall be inclusive of all cost of inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Compression 90 Deg. Elbow threaded Female off take in Metal 20x15mm |
| 60 | Providing, Supplying and fixing of Compression fittings, PN16 rated in conformation to ISO:14236-2000 and shallbe tested as per ISO:3459, ISO : 3501 & ISO: 3503, suitable for drinking water & approved by certified agencies, in food grade polypropylene and shall be inclusive of all cost of inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. Compression 90 Deg. Elbow threaded Female off take in Metal 25x20mm |
| 61 | Providing, Supplying and fixing of PVC Ball Valves in PN16 rating with one end compression using Blue colour compression nut in polypropylene material & other end with female threads conforming to ISO:4422-4, certified from certified agencies suitable for food products & drinking water, female threads in accordance with ISO:7/BS:21/ IS: 554 and shall be inclusive of all cost of testing of all materials, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. complete 20x15mm |
| 62 | Providing, Supplying and fixing of PVC Ball Valves in PN16 rating with one end compression using Blue colour compression nut in polypropylene material & other end with female threads conforming to ISO:4422-4, certified from certified agencies suitable for food products & drinking water, female threads in accordance with ISO:7/BS:21/ IS: 554 and shall be inclusive of all cost of testing of all materials, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. complete 25x20mm |
| 63 | Providing, Supplying and fixing of Clamp Saddle (DI Strap Saddle) for House Service connections from metal pipe Water Distribution mains shall be of fastened strap type with threaded outlet for service connection. Clamp Saddle shall be suitable for nominal size of distribution mains pipe line. The strap shall be elastomer coated (insulated) type for firm grip on pipe as well as to protect the coating on the pipe and to insulate the unidentical metals. The saddle shall be single strap type upto pipe sizes of NB 600 and service outlet 15mm, 20mm & 25mm. Fasteners shall be of threaded nut- bolt- washer type. The sealing between the saddle and mains shall be obtained by using a profiled elastomer seal matching to the curvature of the pipe. The seal shall be of elastomer type, suitable for all potable water application. The material of construction of the body, straps, fasteners etc, shall be of non corrosive material such as engineering plastic (PE/PP) or stainless steel or a combination of both. 80 NB x 15mm, 20mm, 25mm |
| 64 | Providing, Supplying and fixing of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR11 with min PN 12.5\ rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. Electro Fusion Coupler 20mm |
| 65 | Providing, Supplying and fixing of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR11 with min PN 12.5\ rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. Electro Fusion Equal Tee 20mm |
| 66 | Providing, Supplying and fixing of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR11 with min PN 12.5\ rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. Electro Fusion Equal Tee 25mm |
| 67 | Providing, Supplying and fixing of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR11 with min PN 12.5\ rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. Electro Fusion Elbow 90 Deg. 20mm |
| 68 | Providing, Supplying and fixing of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR11 with min PN 12.5\ rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. Electro Fusion Elbow 90 Deg. 25mm |
| 69 | Providing, Supplying and fixing of Electro Fusion Fittings in accordance with BS EN 12201 : Part-3 suitable for drinking water with in black/blue colour manufactured from compounded PE80/PE100 virgin polymer and compatible with PE80/PE100 pipes, in pressure rated SDR11 with min PN 12.5\ rated for water application. The cost such as testing, inspection charges, transportation upto site, transit insurance, loading, unloading, stacking etc. all complete. Electro Fusion Reducer 25x20mm |
| 70 | Providing, laying, jointing & testing of socket & spigotcentrifugally cast (Spun) Ductile Iron pressure pipes withinside cement mortar lining (class K-9) with suitable Rubber Gasket (Push on) joints as per IS:5382/85 including testing of joint 400 mm diameter |
| 71 | Jointing DI pipes class K-7 and K-9 including testing of joints and cost of jointing materials (rubber ISI marked Gasket (push on) joint as per IS-5382/85 and soap solution etc.) 400 mm diameter |
| 72 | Providing, Laying & Testing Ductile Iron Double Socket 90° Bends conforming to IS-9523/2000 having dimension as per table 15 of IS-9523/2000 in the following nominaldiameter/sizes with external bitumen coating and internalcement mortar lining. 400 mm |
| 73 | Providing & Laying Ductile Iron Double Socket 45° Bendsconforming to IS-9523/2000 having dimension as per table 16 of IS-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining. 400 mm |
| 74 | Providing & Laying Ductile Iron All socket Tees conformingto IS-9523/2000 having dimension as per table 21 of IS-9523/2000 in the nominal diameter/sizes with externalbitumen coating and internal cement mortar lining withfinishing as per clause 13 of IS-9523/2000. (All sizes in mm) 300x300 |
| 75 | Providing & Laying Ductile Iron Double Socket branchflange Tee conforming to IS-9523/2000 having dimension asper table 21 of IS-9523/2000 in the nominal diameter/sizeswith external bitumen coating and internal cement mortarlining with finishing as per clause 13 of IS-9523/2000. (Allsizes in mm) 400x300 tEES |
| 76 | Providing & Laying Ductile Iron Double Socket Reducerconforming to IS-9523/2000 having dimension as per table 21 of IS-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS-9523/2000. (All sizes in mm) 300x150 |
| 77 | Providing & Laying Ductile Iron Double Socket Reducerconforming to IS-9523/2000 having dimension as per table 21 of IS-9523/2000 in the nominal diameter/sizes with external bitumen coating and internal cement mortar lining with finishing as per clause 13 of IS-9523/2000. (All sizes in mm) 300x200 |
| 78 | Providing & fixing of Cast iron double flanged sluice valvesas per I.S.:14846-2000 fitted with cast iron cap includingjointing & testing with cost of jointing material such as bolts,nuts, rubber insertions etc. all complete 300mm dia |
| 79 | Providing & fixing following ductile iron doubleflanged check valve without damper (non-return valve)including jointing & testing with cost of jointing material suchas bolts, nuts and rubber insertion all complete. 400 mm dia |
| 80 | Providing & fixing cast iron double air valves, flangedwithout in-built isolating valve as per IS : 14845-2000including jointing & testing with cost of jointing material andrubber insertion all complete 100 mm dia |
| 81 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 15 mm nominal outer dia .Pipes. |
| 82 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 20 mm nominal outer dia .Pipes. |
| 83 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 25 mm nominal outer dia .Pipes. |
| 84 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. External work 32 mm nominal outer dia Pipes. |
| 85 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall. 15 mm dia. nominal bore |
| 86 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall. 20 mm dia. nominal bore. |
| 87 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall. 25 mm dia. nominal bore |
| 88 | Providing and fixing medium grade G.I. pipes medium class (ISI mark) complete with G.I. fittings (ISI mark) and clamps, including cutting and making good the walls etc. Internal work – Exposed on wall. 32 mm dia. nominal bore |
| 89 | Providing, Laying andJointing non-pressure (NP4) RCCsocket & spigot pipes with rubber gasket joint includingtesting of joints. 600 mm dia |
| 90 | Providing, Laying andJointing non-pressure (NP4) RCCsocket & spigot pipes with rubber gasket joint includingtesting of joints. 900 mm dia |
| 91 | Providing, Laying andJointing non-pressure (NP4) RCCsocket & spigot pipes with rubber gasket joint includingtesting of joints. 1200 mm dia |
| 92 | Printing New LettersPrinting new letter of any shade with synthetic enamel paint black or any other approved colour to give an even shade including cost of paint etc. complete and as per relevant specifications. Letters commas and the like not to be measured and paid. Half letter shall be counted as half.(Background painting shall be paid separately) Hindi (Letters commas and the like not to be measured and paid. Half letter shall be counted as half) |
| 93 | Printing New LettersPrinting new letter of any shade with synthetic enamel paint black or any other approved colour to give an even shade including cost of paint etc. complete and as per relevant specifications. Letters commas and the like not to be measured and paid. Half letter shall be counted as half.(Background painting shall be paid separately) English and Roman letters |
| 94 | Retro - reflectorized Traffic signs (Type -IV)Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatory sign as per IRC:67 made Class B Type IV of high intensity grade sheeting vide Section 801.3 of the specifications,2 mm thick aluminium sheeting, 3 mm/4 mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per IRC:67. 90 cm equilateral triangle |
| 95 | Retro - reflectorized Traffic signs (Type -IV)Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatory sign as per IRC:67 made Class B Type IV of high intensity grade sheeting vide Section 801.3 of the specifications,2 mm thick aluminium sheeting, 3 mm/4 mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per IRC:67. 60 cm equilateral triangle |
| 96 | Retro - reflectorized Traffic signs (Type -IV)Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatory sign as per IRC:67 made Class B Type IV of high intensity grade sheeting vide Section 801.3 of the specifications,2 mm thick aluminium sheeting, 3 mm/4 mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per IRC:67. 60 cm circular |
| 97 | Retro - reflectorized Traffic signs (Type -IV)Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatory sign as per IRC:67 made Class B Type IV of high intensity grade sheeting vide Section 801.3 of the specifications,2 mm thick aluminium sheeting, 3 mm/4 mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per IRC:67. 80 cm x 60 cm rectangular |
| 98 | Retro - reflectorized Traffic signs (Type -IV)Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatory sign as per IRC:67 made Class B Type IV of high intensity grade sheeting vide Section 801.3 of the specifications,2 mm thick aluminium sheeting, 3 mm/4 mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per IRC:67. 60 cm x 45 cm rectangular |
| 99 | Retro - reflectorized Traffic signs (Type -IV)Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatory sign as per IRC:67 made Class B Type IV of high intensity grade sheeting vide Section 801.3 of the specifications,2 mm thick aluminium sheeting, 3 mm/4 mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per IRC:67. 60 cm x 60 cm square |
| 100 | Retro - reflectorized Traffic signs (Type -IV)Providing and fixing of Retro- Reflectorised cautionary, mandatory and informatory sign as per IRC:67 made Class B Type IV of high intensity grade sheeting vide Section 801.3 of the specifications,2 mm thick aluminium sheeting, 3 mm/4 mm thick Aluminium composite material sheet depending on the size of the sign fixed over back support frame of minimum 25x25x3mm Angle mounted on a mild steel circular pipe 65 NB, 3.2 mm thickness firmly fixed to the ground by means of properly designed foundation with M25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The sign shall be maintained as per IRC:67. 90 cm high octagon |
| 101 | Retro reflectorized Traffic Signs upto 0.9 sqm size (Type- XI).Providing and erecting direction and place identification retro-reflectorized sign as per IRC:67 made of High Intensity grade sheeting Section 801.3 of specifications, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area exceeding 0.9 Sqm fixed over back support frame of minimum 35 x 35 x 3 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. |
| 102 | Retro reflectorized Traffic Signs with more than 0.9 sqm size (Type- XI).Providing and erecting direction and place identification retro-reflectorized sign as per IRC:67 made of High Intensity grade sheeting Section 801.3 of specifications, fixed over aluminium sheeting, 2 mm thick or Aluminium composite material sheet with overall thickness of 4 mm with area exceeding 0.9 Sqm fixed over back support frame of min. 40 x 40 x 5 mm MS Angle mounted on two nos. of mild steel circular pipe 65 NB,3.2 mm thickness and 4.5 meter total height firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. |
| 103 | Painting on New Concrete Surfaces Painting two coats on concrete surface after filling the surface with synthetic enamel paint in all shades as per Section-800 of specifications and IRC:67 including cost of paint etc. complete |
| 104 | Road Marking with Hot Applied Thermoplastic Compound with Retro Reflectorising Glass Beads Providing and applying 2.5 mm including reflectorising glass beds @ 250 gm per Sqm area thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and as per Section 803 of specifications. |
| 105 | Providing and laying at or near ground level Pre-cast kerb stone of M-25 grade in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement:3 coarse sand) thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete as per direction of Engineer-in-Charge. |
| 106 | Supplying and installation road delineators (road way indicators) as per Section 806 of the specifications. The structure shall be made in roll forming process having height of 800-900 mm above the ground level, width not less than 100 mm and shall extend not more than 200300 mm below the ground while being installed, buried or pressed in to the ground in confirmation with IRC:79, are as directed by the Engineer-in-Charge. The guide post with pure polyester powder coating with minimum 40 microns thickness for protection against corrosion, on top of which Type XI retro reflective sheeting confirming to IRC:67 and ASTMD-4956 shall be pasted on both sides complying to IRC:79. The delineator should consist of minimum retro reflective unit exposed area of 330 cm2 white colour, full cube corner micro prismatic non-metallic retro reflective sheeting on each side conforming with IRC:67 and meeting the coefficient of retro reflection values as per ASTM D 4956 Type XI labelspecification. The delineator shall have grooves across the- length to make the reflective sheets vandal-proof. |
| 107 | Supplying, stacking and spreading of good earth for plantation at site including royalty and carriage earth measured in stacks will be reduced by 20% for payment. Soil filling |
| 108 | Supplying and stacking sludge at site including royalty and carriage up to 1 km (sludge measured in stacks will be reduced by 8% for payment). Sludge |
| 109 | Supplying, stacking and spreading compost/manure from approved source, (manure measured in stacks will be reduced by 8% for payment) Compost/manure |
| 110 | Spreading only of Sludge manure or/and good Earth: Spreading of sludge farm yard manure or/ and good earth in required thickness (cost of sludge, farm- yard manure or/and good earth to be paid for separately). Compost/manure |
| 111 | Providing and Laying Mexican/Zyosia carpet grass Turf with earth 50mm to 60mm thickness on existing ground prepared with proper level and ramming with tools wooden (Durmuth) and then rolling the surface with light roller make the surface smoothen and light watering with sprinkler and maintenance for 30 days or more till the grass establishes properly, as per direction of Engineer-in-Charge. Mexican/Zyosia carpet grass Turf for mound |
| 112 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 120 cm dia and 120 cm deep. |
| 113 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 60 cm dia and 60 cm deep. |
| 114 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 45 cm dia, and 45 cm deep. |
| 115 | Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately) : Holes 30 cm dia, and 30 cm deep. |
| 116 | Providing and planting different variety of plants of approved quality and sizes as mentioned including making pits of required size at site, refilled with B.C. Soil mixture manuring and pesticide etc. complete (to be paid separately) including watering and 90 days maintenance from the date of final bill as per direction of Engineer-inCharge complete in all respect (B.C. Mixture paid separately). Shrubs :- Bahunia Tomentosa, Beloperone Species, Caselpinnia Pulcherima, Caliandra Emarginata, Callandra Hybrida, Cassia Bi flora, Cassia Laevigata, Cestrum Nocturnum, Dombeya Mastersii, Euphorbia Caracasana, Euphorbia Pulcherima, Excorea bi color, Excorea tri color, Ficuas Blackii, Ficus Reginold, Ficus Panda, Gardenia, Gulphinia, Jasminoides, Hamelia Pattens, Heliconia, Hibiscus Rosasinensis, Hibiscus Verigated, Hibiscus Viceroy, Jatropha Multifida, Largestomia Indica, Malpighia Coccigera, Murraya Exotica, Murraya Koeniggi, Murraya Sambucum, Mussaenda Erythrophylla, Nerium Oleander, Nyctanthus Arbortristis, Plumbego Capensis, Putranjeeva Roxburghii, Tabernaemontana Coronaria, Tabernaemontana Divaricata, Tecoma Gaudi Chaudi, Tecoma Stans, Thevetia Nerifolia, Thuja Compacta and equivalent plants. |
| 117 | Providing and planting different variety of plants of approved quality and sizes as mentioned including making pits of required size at site, refilled with B.C. Soil mixture manuring and pesticide etc. complete (to be paidseparately) including watering and 90 days maintenance from the date of final bill as per direction of Engineer-inCharge complete in all respect (B.C. Mixture paid separately). Ground cover plants height: 30cm-45cm Alpinia Verigated, Alternanthera species, Aspyragus Myerri, Aspyragus Springenii, Aspidistra, Canna (regular, Dwarf), Chlorodendron Inermii, Chlorophytum (Green), Chlorophytum verigated, Coffea Chinensis, Dianella Verigated, Durranta (Goldiana, Green, Verigated), Euphorbia Milli hybrid, Ipomea (Golden leaves), Iresine herbstii, Juniper Prostata, Juniper Africana, Ophiopogon plant, Ophiopogon jaburan, Portulacaria Afra (jade Plant), Schefflera Green, Schefflera verigated, Setcreasea Purpurea, Syngonium (Butterfly) species, Syngonium miniature, Syngonium Dwarf, Syngonium variegated, Tradescantia, Wadelia Trilobata, Zebrina Tradescantia, Pendanas, Spider Lily Black, Spider Lily verigated, Aclypha (Red, Green,Mini), Lantana (Red, Yellow, Purple, White, verigated), Haemalia Mini and similar plants. |
| 118 | Providing and planting different variety of plants of approved quality and sizes as mentioned including making pits of required size at site, refilled with B.C. Soil mixture manuring and pesticide etc. complete (to be paid separately) including watering and 90 days maintenance from the date of final bill as per direction of Engineer-in-Charge complete in all respect (B.C. Mixture paid separately). Winter seasonal height: 20-30 cm Any of one from Alyssum, Anemone, Antirrhinium Hybrid, Aster Hybrid, Begonia and its different varieties, Calendula, Carnation,Coleus, Daisy, Dianthus, Fressia, Gazania, Impatiens, Kalanchoe, Marigold Inca, Missam branthemum, Nemasia, Nasturitium, Ornamental Kale, Pansy Hybrid Sakata, Petunia Hybrids such as Bravo, Star and Picotee, Salvia, Stock, Stock, Verbena |
| 119 | Providing and planting different variety of plants of approved quality and sizes as mentioned including making pits of required size at site, refilled with B.C. Soil mixture manuring and pesticide etc. complete (to be paid separately) including watering and 90 days maintenance from the date of final bill as per direction of Engineer-in-Charge complete in all respect (B.C. Mixture paid separately). Summer and rainy seasonal plants Any of one from Celosia, Caladium Hybrid, Cockscomb, Cosmos, Gaillardia, Gomphorena, Kochchea, Portulacca, Sunflower Hybrid, Sunflower Single, Tapiocca Variegated (Manihot Esculenta), Vinca, Zinnia Hybrids |
| 120 | Providing and planting different variety of plants of approved quality and sizes as mentioned including making pits of required size at site, refilled with B.C. Soil mixture manuring and pesticide etc. complete (to be paid separately) including watering and 90 days maintenance from the date of final bill as per direction of Engineer-in-Charge complete in all respect (B.C. Mixture paid separately). Rose Budded of H.T variety and miniature Roses. height: 30cm & above |
| 121 | Providing and planting different variety of plants of approved quality and sizes as mentioned including making pits of required size at site, refilled with B.C. Soil mixture manuring and pesticide etc. complete (to be paid separately) including watering and 90 days maintenance from the date of final bill as per direction of Engineer-in-Charge complete in all respect (B.C. Mixture paid separately). Plant Creeper Rose Varieties |
| 122 | Providing and planting different variety of plants of approved quality and sizes as mentioned including making pits of required size at site, refilled with B.C. Soil mixture manuring and pesticide etc. complete (to be paid separately) including watering and 90 days maintenance from the date of final bill as per direction of Engineer-in-Charge complete in all respect (B.C. Mixture paid separately). Standard Roses H.T. Variety |
| 123 | Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid conduit in surface or concealed as per specification. 3 X 1.5 sq. mm. |
| 124 | Supplying and drawing single core PVC insulated cable FR with copper multi strand conductor ISI marked in existing rigid conduit in surface or concealed as per specification. 2.5 Sq mm cable 3 X 2.5 sq mm |
| 125 | Supply, fixing, testing & commissioning wall/floor mounted LT panel primer coated with powder coated paint & provided with required gasket for dust/vermin proof with degree of protection IP42 suitable for 415Volt 3 phase, 50 Hz, 4 wire system fabricated out of CRCA sheet upto 2 mm thick (1.6 mm for doors) duly compartmentalized for incomer, bus section, outgoings, cable alleys & CT, PT Ampere Metre, Volt Metre, selector switches, frequency Metre, phase indicating lamp, Energy Metre complete including cost of busbar supports, detachable cable gland plates, 2 earthing terminals, internal wiring & fixing of separately supplied MCBs, MCCBs, ACB, panel mounted changeover switch/SFUs, etc. as required but excluding cost of busbar strips, Ampere Metre, Volt Metre, selector switch as per approved design & specification |
| 126 | Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. Digital Ampere Metre with CTs with selector switch |
| 127 | Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. Digital Volt Metre with selector switch & HRC fuse |
| 128 | Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. Frequency Metre |
| 129 | Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. Copper Bus bar strips with PVC sleeves |
| 130 | Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. Aluminium bus bar strips with PVC sleeves |
| 131 | Supply and fixing of LT panel accessories of approved make in existing LT panel including connections etc. as required as per specification. LED lamp indicator |
| 132 | Astro Time Switch-For lights On – Off based on Sunrise & Sunset timing Supply,installation, testingandcommissioningofAstro-TimeSwitchbasedon Astroprogrami.e. calculation of sunrise and sunsettimes through date,timeand IndianPINCodes.Itshallhaveano ptiono fAstroONperiod overridebytimeswitchand Offsetfunction whichallows programmingof switchingtimesOffsetfro theastronom ictime.The230V ACoperated AstroTimeWitchs ha llhav eanoperatingran geof96...253VACwith1NO, 16A,AgSn02 Contactmaterialw ithStarting currentof120Aand1CO cadmiumFreeco ntacts,itshallha veLCDstatusin dicationwithbacklight displaya longwithint ernaleas ilyreplaceablebatteryonthefrontsidefor set-upandprogramming.TheelectricallifeatratedloadAC1shal be1Lakh cyclesandshallworkatanambienttemperatureof-20to+50degC.It shallhaveadiele ctricstrength between supplyand open contactsof4000VAC,between open contacts1000VA Crespectively and rated impulse voltage (between supply and contacts) of 6k Vandrated impulse voltage (between open contacts)of1.5kV.Themounting shall be on 35 mm DI Nrail (EN 60715) and shall have necessary approvals like CE, IMQ and EAC |
| 133 | Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal - magnetic release having respective breaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2 Current Rating -25 to100 Amps & 70% -100% adjustable |
| 134 | Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal - magnetic release having respective breaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2 Current Rating -160 Amps & 70% -100% adjustable |
| 135 | Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal - magnetic release having respective breaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2 CurrentRating-160Amps&Adjustable:70%-100%thermal&5-10times magnetic setting |
| 136 | Supplying of ISI marked and approved make of moulded case circuit breaker (MCCB) suitable for 3 phase,3 pole, 50 Hz, 415 Volts, (Ics=100%Icu) AC supply with thermal - magnetic release having respective breaking capacity (KA) at 415 Volts cited against their range standard conforming to IS/IEC 60947-2 CurrentRating-250Amps&Adjustable:70%-100%thermal&5-10times magnetic setting |
| 137 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but withoutenclosures :- MCB SP 6Amp to 32Amp 10kA rating |
| 138 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but withoutenclosures :- MCB DP 6Amp to 32Amp 10kA rating |
| 139 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but withoutenclosures :- FOR TRIPLE POLE & NEUTRAL(TPN) 6 Amp to 32 Amp Rating |
| 140 | Supply of ISI marked and accepted standard of miniature circuit breaker (MCB) of 'C' series with short circuit indication, suitable for 240/415 Volts,50 Cycle, 10 kA/15 kA Value AC supply conforming to IS : 8828 : 1996, IEC : 60898 :2002 & 60947-2 but withoutenclosures :- FOR TRIPLE POLE & NEUTRAL(TPN) MCB FP For 50 Amp to 63 Amp Rating |
| 141 | Supplying and installing double wall corrugated pipes (DWC) of HDPE (IS 14930 Part II -marked) for cable laid underground with necessary material and at required depth upto 90cm. below road/ground surface, including excavation, back filling with excavated material, ramming and making the surface good. 50.00mm outside dia. |
| 142 | Supplying and installing double wall corrugated pipes (DWC) of HDPE (IS 14930 Part II -marked) for cable laid underground with necessary material and at required depth upto 90cm. below road/ground surface, including excavation, back filling with excavated material, ramming and making the surface good. 110.00mm outside dia |
| 143 | Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor ARMOURED 4 CORE 6 Sq.mm.(XLPE) |
| 144 | Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor ARMOURED 4 CORE 10 sq. mm. |
| 145 | Supply of XLPE insulated power cable (conforming IS-7098 Part-I) 1100 Volt grade, 1 core/2 core/3½ core/4 core ISI marked with alu. stranded /solid conductor ARMOURED 4 CORE 150 Sq.mm.(XLPE) |
| 146 | Laying of one number PVC insluated and PVC sheated power cable of 1.1kV grade of size not exceeding 25Sq.mm directingroundincludingexcavation,sandcushioining,protective covering and refilling the pit etc. as required. |
| 147 | Laying of one number PVC insluated and PVC sheated power cable of 1.1kV grade of size not exceeding 120Sqmmbut notexceedin g400Sq.mm direct in ground including excavation and cushioning protective covering and refilling the pit etc. as required. |
| 148 | Earthing with G.I.Earth pipe 4.5 meter long and 40mm dia with masonary enclosure incementmortor, cover plate having locking arrangment on the top etc.(but without charcoal or coke and salt) complete as required. |
| 149 | Earthing with G.I. Earth plate 600mmX600mmX6mm thick including accessories and providing masonary encloser incement mortor,coverplatehaving lockingarrangmentonthetopandG.I. wateringpipe20mmdia2.7meter longetc.(butwithoutcharcoalor coke and salt ) complete as required. |
| 150 | Add Extra for using salt and charcoal / coke for G.I. Plate or Copper plate earth electrode as required including excavation &refilling. |
| 151 | Supplying, installing, testing of earth Coil (coil of 115 turns of 50mm dia, and 2.5 Mtrs. Lead of 4 mm G.I wire. |
| 152 | Providing and fixing 25mm X 5mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required |
| 153 | Supplying and laying 8 SWG copper wire at 0.5 meter below ground level as conductor earth electrode including soldering etc. as required. |
| 154 | Supplying and fixing heavy duty cable gland for P.V.C. insulated armoured cable with brass washer, rubber ring complete erected with cable and lead connection etc. as per specification complete. Gland size 22mm suitable for cable 2/3,3½, 2/4 x 10 sq. mm or 2x 16 sq. mm |
| 155 | Supplying and fixing heavy duty cable gland for P.V.C. insulated armoured cable with brass washer, rubber ring complete erected with cable and lead connection etc. as per specification complete. GlandSize50mmsuitableforcable3½x150Sq.mmOR3 x 185 Sq.mm |
| 156 | Supplying and fixing ferrules as per IS - specification suitable for following size of cable for circuit identification including connection as required complete 2.5 to 6.00 sq. mm |
| 157 | Supplying and fixing ferrules as per IS - specification suitable for following size of cable for circuit identification including connection as required complete 10.00 sq. mm |
| 158 | Supplying and fixing crimping type alum. lugs as per I.S.S. specification suitable for following size of cable with alu./copper solid/stranded conductor evenly crimped with high/pressure tool and connected to switch gear/bus/M.C.C.B./M.C.B. etc. as required complete. 6 -16 sq. mm |
| 159 | Supplying and fixing crimping type alum. lugs as per I.S.S. specification suitable for following size of cable with alu./copper solid/stranded conductor evenly crimped with high/pressure tool and connected to switch gear/bus/M.C.C.B./M.C.B. etc. as required complete. 150 Sq.mm. |
| 160 | Copper lugs tube type Upto 16 sq. mm conductor size |
| 161 | Providing and erecting 9mtrs.High hot dipped galvanized octagonal poles with bottom of 200mmA/F,top100mm,A/F made from 3mm thick HT plate & 290x290x16mm base plate with 1500mm long decorative sword type double arm bracket complete ererted in an approved manner on provided foundation.Suitable size & type of foundation bolts.4nos.bolts type M20x750mm 'J' type foundation bolts (EN8 grade) |
| 162 | Providing and fixing of sword canopy type double arm GI bracket .upto 2 Mtr. Long for 70mm A/F top octagonal pole |
| 163 | Dismantlingpoles/street light standards/strutsembedded incement concrete foundation etc. as required. |
| 164 | Designing & casting with M-20 cement concrete foundation suitable for 9 mtrs. Octagonal poles considering the safe soil bearing capacity at site as 10 T/sqm at 2 mtrs. Depth including excavation, foundation nut bolts in an approved manner. |
| 165 | Providing and fixing of sword canopy type single arm GI bracket upto 2 Mtr. Long for 70mm A/F top octagonal pole |
| 166 | Supplying of street light with high power LED of 1 to 3W each assembled on single MCPCB,system lumens output with efficacy>110lm/W.luminiare having color temp 6500K&50000 burning hrs life with minimum@L70, The colourrenderingindex of LED light should be more than70.Luminiarecomprises of driver, PF0.95& surge protection 4KV.Housing made ofpressurediecastalumi niumwithheatresistant flatglass/Lenstype,IP66protection.SubmissionLM80-08FormLEDSourceManufacturer&LM79-08/IS16106fromNABLapprovedlab.Manufacturermanadatoryi/c50mm.diaG.I.Pipebracketupto2mtr.longinrequiredangle/shape,connectionlead,testingetctocompletethejob.2YrsGuaranteecertificatefrom manufacturer. 150W |
| 167 | Decorative designer poles , Providing and erection of black painted galvanized decorative designerpoles indifferent section, top60mmdia., bottom140mm dia.withgoldcolourpaintedornamentalcastaluminiumringhaving lockableweather proof flushdoor junctionbox inbottomsection, base plate dia. 290mmhaving 4 holes of 22mmdia. complete erectedinanapprovedmanneronexistingfoundation.Suitablesize &typeof foundationbolts4nos.X16mmX450mm'J' type(EN8 grade) 4 meter Heigh |
| 168 | Supplying of integral post top lantern LED fittingcomprisesof copper dust finishcastaluminiumspigotandspunaluminiumcanopyfixedwithopal polycarbonate, pipearrangement for verticalmounting, openconstruction driverandaccessoriesarewireduptoterminalblock.LEDof1to3Weach assembledonsingleMCPCB, having color temp6500K& having50000 burninghrs lifewithminimum@L70, system lumenoutput shouldbe minimumwithefficacy>80lm/W.LEDdriverPF0.95&surgeprotection2KV. ThecolourrenderingindexofLEDlightshouldbemorethan70.Submission LM80-08FormLEDSourceManufacturer&LM79-08/ IS16106fromNABL approvedlab.Manufacturermanadatory. i/c connectionwire, testingetc. to complete thejob. 2 Yrs Guarantee certificate from manufacturer. 40 watt. |
| 169 | Concreting of for poles @ 0.3 cmt. for pole (Including muffing) |
| 170 | For Concreting (1:3:6) 0.36 H-Beam -7/9m & RSJ 9.3 m,PCC PoleDP/TP/4P of 140 kg.8m 200Kg.9m 280Kg 0.9m,0.56 for 11m,0.60 for 13m,0.67for 15m Per Poleinclude muff wid Pit digging,0.3per stay(20/25)etc |
| 171 | BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 315 KVA DistributionTransformer |
| 172 | LT Bi-metallic Clamp for DTR 12 mm |
| 173 | HV Bimatalic connector 12 mm |
| 174 | BIMETALIC CLAMP DISTRIBUTION TRANSFORMERS BUSHING |
| 175 | BIMETALIC CLAMP DISTRIBUTION TRANSFORMERS BUSHING |
| 176 | 11 KV A.B. switch |
| 177 | Supply of 11 KV AB Switch Polymer type 400 Amp with Complete fitting |
| 178 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 179 | 11 KV, LA POLYMER TYPE GAPLESS /METAL OXIDE 9 KV , 5 KA LINE TYPE |
| 180 | 11 KV D.O. fuse unit |
| 181 | 11 KV D.O. Fuse Unit Polymer type |
| 182 | L.T. Distribution box suitable for 315 KVA transformer (without TPN switches) with MCCB on incoming and PFunits on outgoing side |
| 183 | L.T. Distribution box suitable for 315 KVA transformer (without TPN switches) with MCCB on incoming and PFunits on outgoing side |
| 184 | Complete jumpering of DTR |
| 185 | Complete jumpering of DTR |
| 186 | Three phase 20-80 Amps.with L.S. & TOD Facility with box |
| 187 | Three phase 20-80 Amps.with L.S. & TOD Facility with box |
| 188 | AAAC Rabbit conductor 0.05 sq. inch (55 sq.mm. Al.Eq.) |
| 189 | AAAC Rabbit conductor 0.05 sq. inch (55 sq.mm. Al.Eq.) |
| 190 | XLPE LT 1 - CORE ALUMINIUM UNARMOURED 300 SQMM CABLE |
| 191 | XLPE LT 1 - CORE ALUMINIUM UNARMOURED 300 SQMM CABLE |
| 192 | 150 Sq.mm.,single core XLPE insulated un-armoured aluminium conductor cable |
| 193 | 150 Sq.mm.,single core XLPE insulated un-armoured aluminium conductor cable |
| 194 | Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 195 | Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 196 | Stay wire 7/3.15 mm. (5.5 kg.stay wire per stay set etc |
| 197 | Stay wire 7/3.15 mm. kg per stay for PCC Pole 140 kg 8 m@ 5.5, 200 Kg. 9 m @ 6.5, RSJ 9.3 m.@ 6.5 |
| 198 | M.S.Nuts and Bolts |
| 199 | M S BOLT WITH NUT |
| 200 | 11KV Strain hard ware fitting |
| 201 | 11 KV STRAIN (T&C TYPE) HARDWARE FITTINGS |
| 202 | H- BEAM 11 METER 152 X 152 MM 37.1 KG/METER |
| 203 | H- BEAM 11 METER 152 X 152 MM 37.1 KG/METER |
| 204 | Back Clamp for H-Beam Size- ,Wt-1.92 Kg using 65X8 Ms Flat |
| 205 | Back Clamp suitable for H-Beam (MS Flat 65x8 mm)- each weight |
| 206 | DC.CROSS ARMS 8` CENTRE TO CENTRE 100X50X6MM CHANNEL (each weight-26.32 Kg) (ONE SET FOR FEEDER AND ONE SET FOR ISOLATOR/ME) |
| 207 | DC.CROSS ARMS 8` (2.4 METER ) CENTRE TO CENTRE 100X50X6 MM CHANNEL (set) |
| 208 | Transformer mounting DC cross-arm 100 X 50 x 6 mm, channel |
| 209 | TRANSFORMER MOUNTING CHANNEL 100X50X6MM(set) |
| 210 | Transformer belting with 50 X 50 X 6 mm.angle with two cross fixing channels |
| 211 | Supply of Trans.Mounting with Belting with 50 X 50 X 6 mm.angle with two cross fixing channels (set) |
| 212 | D.O.MOUNTING CHANNEL 75X40X6MM |
| 213 | D.O.MOUNTING CHANNEL 75X40X6MM |
| 214 | STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED) |
| 215 | STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED) |
| 216 | Clamp suitable for 152 X 152 mm., 37.1 Kg./mtr H-Beam ( each weight 3.2 kg) |
| 217 | Clamp suitable for 152 X 152 mm., 37.1 Kg./mtr H-Beam ( each weight 3.2 kg) (set) |
| 218 | Danger Boards Enamalled Type 11KV |
| 219 | Danger Boards Enamalled Type 11KV |
| 220 | 11 KV (45KN) 16mm FRP with 25mm per KV creepage Disc Insulator Polymer |
| 221 | 11 KV (45KN) 16mm FRP with 25mm per KV creepage Disc Insulator Polymer |
| 222 | Stone Block/Pre cast block for base pedding 450x450x75mm |
| 223 | Stone Block/Pre cast block for base pedding 450x450x75mm |
| 224 | Red oxide paint |
| 225 | Red oxide paint |
| 226 | Aluminium paint |
| 227 | Aluminium paint |
| 228 | Earthing of DTR as per Schedule G-1.1- A (For black cotton soil) (Using -3 no pipe |
| 229 | Earthing of DTR as per schedule G-1 (for black cottonsoil)Earthing of DTR as per Schedule G-1.1- A (For black cotton soil) (Using -3 no pipe) |
| 230 | Concreting of for poles @ 0.3 cmt. for pole (Including muffing) |
| 231 | For Concreting (1:3:6) 0.36 H-Beam -7/9m & RSJ 9.3 m,PCC PoleDP/TP/4P of 140 kg.8m 200Kg.9m 280Kg0.9m,0.56 for 11m,0.60 for 13m,0.67for 15m Per Pole include muff wid Pit digging,0.3per stay(20/25)etc |
| 232 | Stay wire 7/4.0 mm. (8.5kg. Stay wire per stay set) |
| 233 | Stay wire 7/4mm. kg per stay for H-Beam / PCC Pole 280 Kg, 9 m @ 7.5, 11 m @ 8.50, 13 m @ 10, 15 m @ 12 |
| 234 | Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 235 | Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 236 | Earthing Coil ( coil of 115 turns of 50 mm.dia. and 2.5 Mtrs. lead of 4.0 mm. G.I wire) |
| 237 | EARTHING COIL OF 115 TURNS OF 50 MM.DIA AND 2.5 MTR LEAD OF 4.0 MM G.I WIRE |
| 238 | M.S.Nuts and Bolts |
| 239 | M S BOLT WITH NUT |
| 240 | 11KV Strain hard ware fitting |
| 241 | 11 KV STRAIN (T&C TYPE) HARDWARE FITTINGS |
| 242 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-13 mtr. Long =482.3 kg |
| 243 | H-Beams 152 X 152 mm., 37.1 Kg./Mtr.-13 mtr. Long =482.3 kg |
| 244 | Back Clamp for H-Beam Size- ,Wt-1.92 Kg using 65X8 Ms Flat |
| 245 | Back Clamp suitable for H-Beam (MS Flat 65x8 mm)- each weight |
| 246 | D.C.cross- arm of ISMC channel of 100 X 50, suitable for 4' centre DP with 2 pair of clamps suitable for H-Beam |
| 247 | DC.CROSS ARMS 4` (1.2 METER) CENTRE TO CENTRE 100X50X6MM. CHANNEL |
| 248 | STAY SET WITHOUT STAY WIRE 20 MM. (PAINTED) |
| 249 | STAY SET WITHOUT STAY WIRE 20 MM. (PAINTED) |
| 250 | Clamp suitable for 152 X 152 mm., 37.1 Kg./mtr H-Beam ( each weight 3.2 kg) |
| 251 | Clamp suitable for 152 X 152 mm., 37.1 Kg./mtr H-Beam ( each weight 3.2 kg) (set) |
| 252 | Bracing / Support Angle of 65x65x6mm 1.2 Mtr (4 feet) Center DP |
| 253 | Bracing / Support Angle of 65x65x6mm 1.2 Mtr (4 feet) Center DP |
| 254 | Danger Boards Enamalled Type 11KV |
| 255 | Danger Boards Enamalled Type 11KV |
| 256 | 11 KV, 5KN PIN COMPOSITE POLYMER INSULATOR |
| 257 | 11 KV, 5KN PIN COMPOSITE POLYMER INSULATOR |
| 258 | 11 KV (45KN) 16mm FRP with 25mm per KV creepage Disc Insulator Polymer |
| 259 | 11 KV (45KN) 16mm FRP with 25mm per KV creepage Disc Insulator Polymer |
| 260 | Stone Block/Pre cast block for base pedding 450x450x75mm |
| 261 | Stone Block/Pre cast block for base pedding 450x450x75mm |
| 262 | Red oxide paint |
| 263 | Red oxide paint |
| 264 | Aluminium paint |
| 265 | Aluminium paint |
| 266 | Concreting of for poles @ 0.3 cmt. for pole (Including muffing) |
| 267 | For Concreting (1:3:6) 0.36 H-Beam -7/9m & RSJ 9.3 m,PCC PoleDP/TP/4P of 140 kg.8m 200Kg.9m 280Kg 0.9m,0.56 for 11m,0.60 for 13m,0.67for 15m Per Poleinclude muff wid Pit digging,0.3per stay(20/25)etc |
| 268 | BIS certified Energy Efficiency Level-III (Old)/Level-II(New) Convential 11/0.433KV, 315 KVA Distribution Transformer |
| 269 | BIS certified Energy Efficiency Level-III (Old)/Level-II (New) Convential 11/0.433KV, 315 KVA DistributionTransformer |
| 270 | LT Bi-metallic Clamp for DTR 12 mm |
| 271 | HV Bimatalic connector 12 mm |
| 272 | BIMETALIC CLAMP DISTRIBUTION TRANSFORMERS BUSHING |
| 273 | BIMETALIC CLAMP DISTRIBUTION TRANSFORMERS BUSHING |
| 274 | 11 KV A.B. switch |
| 275 | Supply of 11 KV AB Switch Polymer type 400 Amp with Complete fitting |
| 276 | 9 KV Gapless type ( 5KA) Polymer for DTR |
| 277 | 11 KV, LA POLYMER TYPE GAPLESS /METAL OXIDE 9 KV , 5 KA LINE TYPE |
| 278 | 11 KV D.O. fuse unit |
| 279 | 11 KV D.O. Fuse Unit Polymer type |
| 280 | L.T. Distribution box suitable for 315 KVA transformer (without TPN switches) with MCCB on incoming and PFunits on outgoing side |
| 281 | L.T. Distribution box suitable for 315 KVA transformer (without TPN switches) with MCCB on incoming and PFunits on outgoing side |
| 282 | Complete jumpering of DTR |
| 283 | Complete jumpering of DTR |
| 284 | Three phase 20-80 Amps.with L.S. & TOD Facility with box |
| 285 | Three phase 20-80 Amps.with L.S. & TOD Facility with box |
| 286 | AAAC Rabbit conductor 0.05 sq. inch (55 sq.mm. Al.Eq.) |
| 287 | AAAC Rabbit conductor 0.05 sq. inch (55 sq.mm. Al.Eq.) |
| 288 | XLPE LT 1 - CORE ALUMINIUM UNARMOURED 300 SQMM CABLE |
| 289 | XLPE LT 1 - CORE ALUMINIUM UNARMOURED 300 SQMM CABLE |
| 290 | 150 Sq.mm.,single core XLPE insulated un-armoured aluminium conductor cable |
| 291 | 150 Sq.mm.,single core XLPE insulated un-armoured aluminium conductor cable |
| 292 | Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 293 | Anti climbing Device (Barbed Wire) GS 2.24 mm Dia (14 SWG) |
| 294 | Stay wire 7/3.15 mm. (5.5 kg.stay wire per stay set etc |
| 295 | Stay wire 7/3.15 mm. kg per stay for PCC Pole 140 kg 8 m@ 5.5, 200 Kg. 9 m @ 6.5, RSJ 9.3 m.@ 6.5 |
| 296 | M.S.Nuts and Bolts |
| 297 | M S BOLT WITH NUT |
| 298 | 11KV Strain hard ware fitting |
| 299 | 11 KV STRAIN (T&C TYPE) HARDWARE FITTINGS |
| 300 | H- BEAM 11 METER 152 X 152 MM 37.1 KG/METER |
| 301 | H- BEAM 11 METER 152 X 152 MM 37.1 KG/METER |
| 302 | Back Clamp for H-Beam Size- ,Wt-1.92 Kg using 65X8 Ms Flat |
| 303 | Back Clamp suitable for H-Beam (MS Flat 65x8 mm)- each weight |
| 304 | DC.CROSS ARMS 8` CENTRE TO CENTRE 100X50X6 MM CHANNEL (each weight-26.32 Kg) (ONE SET FORFEEDER AND ONE SET FOR ISOLATOR/ME) |
| 305 | DC.CROSS ARMS 8` (2.4 METER ) CENTRE TO CENTRE 100X50X6 MM CHANNEL (set) |
| 306 | Transformer mounting DC cross-arm 100 X 50 x 6 mm, channel |
| 307 | TRANSFORMER MOUNTING CHANNEL 100X50X6MM(set) |
| 308 | Transformer belting with 50 X 50 X 6 mm.angle with two cross fixing channels |
| 309 | Supply of Trans.Mounting with Belting with 50 X 50 X 6 mm.angle with two cross fixing channels (set) |
| 310 | D.O.MOUNTING CHANNEL 75X40X6MM |
| 311 | D.O.MOUNTING CHANNEL 75X40X6MM |
| 312 | STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED) |
| 313 | STAY SET WITHOUT STAY WIRE 16 MM. (PAINTED) |
| 314 | Clamp suitable for 152 X 152 mm., 37.1 Kg./mtr H-Beam ( each weight 3.2 kg) |
| 315 | Clamp suitable for 152 X 152 mm., 37.1 Kg./mtr H-Beam ( each weight 3.2 kg) (set) |
| 316 | Danger Boards Enamalled Type 11KV |
| 317 | Danger Boards Enamalled Type 11KV |
| 318 | 11 KV (45KN) 16mm FRP with 25mm per KV creepage Disc Insulator Polymer |
| 319 | 11 KV (45KN) 16mm FRP with 25mm per KV creepage Disc Insulator Polymer |
| 320 | Stone Block/Pre cast block for base pedding 450x450x75mm |
| 321 | Stone Block/Pre cast block for base pedding 450x450x75mm |
| 322 | Red oxide paint |
| 323 | Red oxide paint |
| 324 | Aluminium paint |
| 325 | Aluminium paint |
| 326 | Earthing of DTR as per Schedule G-1.1- A (For black cotton soil) (Using -3 no pipe |
| 327 | Earthing of DTR as per schedule G-1 (for black cotton soil)Earthing of DTR as per Schedule G-1.1- A (For blackcotton soil) (Using -3 no pipe) |
| 328 | Concreting of for poles @ 0.3 cmt. for pole (Including muffing) |
| 329 | For Concreting (1:3:6) 0.36 H-Beam -7/9m & RSJ 9.3 m,PCC PoleDP/TP/4P of 140 kg.8m 200Kg.9m 280Kg 0.9m,0.56 for 11m,0.60 for 13m,0.67for 15m Per Poleinclude muff wid Pit digging,0.3per stay(20/25)etc |
| 330 | Supply, installation, testing and commissioning of RMU 11 KV, 630A, 21 KA for 3 sec SF6 insulated, (Two Incomers + Two Outgoing) consisting of 2 nos remote operatedmotorised load break |
| 331 | Supply, installation, testing and commissioning of RMU 11 KV, 630A, 21 KA for 3 sec SF6 insulated, (Two Incomers + Two Outgoing) consisting of 2 nos remote operatedmotorised load break |
| 332 | HDPE cleats 3 nos per RMU |
| 333 | HDPE cleats 3 nos per RMU |
| 334 | Earthing Set |
| 335 | EARTHING SET (DTR EARTHING) AS PER CIRCULAR NO 1516 DATED 17.03.08 (EARTHING SET 40MM , 3METER GI PIPE , GI WIRE, EARTHING CLMAP AND NUT BOLT)(SET) |
| 336 | Heat shrinkable cable jointing kit with lugs for 11 kV grade XLPE cable for 3x300 sq mm |
| 337 | Errection of END TERMINATION SUITABLE FOR 11 KV 3 CORE 300 SQ MM UNDERGROUND XLPE CABLE(set) |
| 338 | END TERMINATION SUITABLE FOR 11 KV 3 CORE 150 SQ MM UNDERGROUND XLPE CABLE |
| 339 | Errection of END TERMINATION SUITABLE FOR 11 KV 3 CORE 150 SQ MM UNDERGROUND XLPE CABLE |
| 340 | Erection of Plinth per VCB- 33KV or 11KV [Pit digging- size(3x2x0.6) = 3.6 cu. Mtr,Base filling by Kopra in case of Black cotton soil-1.92 cmt., concreting, curing and backfilling of pits ] |
| 341 | Erection of Plinth per VCB- 33KV or 11KV [Pit digging- size(3x2x0.6) = 3.6 cu. Mtr,Base filling by Kopra in case of Black cotton soil-1.92 cmt., concreting, curing and backfilling of pits |
| 342 | Concreting of for poles @ 0.3 cmt. for pole (Including muffing) |
| 343 | For Concreting (1:3:6) 0.36 H-Beam -7/9m & RSJ 9.3 m,PCC PoleDP/TP/4P of 140 kg.8m 200Kg.9m 280Kg 0.9m,0.56 for 11m,0.60 for 13m,0.67for 15m Per Poleinclude muff wid Pit digging,0.3per stay(20/25)etc |
| 344 | LT FEEDER PILLER, 1 no.-160 amp,16 kA b.c at 415 volts TP MCCB with copper neutral link 1 set-250 amp,rating TPN aluminium busbar,8 no 63 amp,10 kA b.c. TP MCBcomplete |
| 345 | Outdoor type feeder pillar (Powder coated Metal Sheet outer door thickness - 2mm, inner door thicness- 1.6 mm,Each door shall be provided with 2 numbers industrial locks) alongwith stand and accesories etc |
| 346 | Concreting of for poles @ 0.3 cmt. for pole (Including muffing) |
| 347 | For Concreting (1:3:6) 0.36 H-Beam -7/9m & RSJ 9.3 m,PCC PoleDP/TP/4P of 140 kg.8m 200Kg.9m 280Kg0.9m,0.56 for 11m,0.60 for 13m,0.67for 15m Per Pole include muff wid Pit digging,0.3per stay(20/25)etc |
| 348 | Supply, installation, testing and commissioning of RMU 11 KV, 630A, 21 KA for 3 sec SF6 insulated, (Two Incomers + Two Outgoing) consisting of 2 nos remote operatedmotorised load break |
| 349 | Supply, installation, testing and commissioning of RMU 11 KV, 630A, 21 KA for 3 sec SF6 insulated, (Two Incomers + Two Outgoing) consisting of 2 nos remote operatedmotorised load break |
| 350 | HDPE cleats 3 nos per RMU |
| 351 | HDPE cleats 3 nos per RMU |
| 352 | Earthing Set |
| 353 | EARTHING SET (DTR EARTHING) AS PER CIRCULAR NO 1516 DATED 17.03.08 (EARTHING SET 40MM , 3 METER GI PIPE , GI WIRE, EARTHING CLMAP ANDNUT BOLT)(SET) |
| 354 | Heat shrinkable cable jointing kit with lugs for 11 kV grade XLPE cable for 3x300 sq mm |
| 355 | Errection of END TERMINATION SUITABLE FOR 11 KV 3 CORE 300 SQ MM UNDERGROUND XLPE CABLE(set) |
| 356 | END TERMINATION SUITABLE FOR 11 KV 3 CORE 150 SQ MM UNDERGROUND XLPE CABLE |
| 357 | Errection of END TERMINATION SUITABLE FOR 11 KV 3 CORE 150 SQ MM UNDERGROUND XLPE CABLE |
| 358 | Erection of Plinth per VCB- 33KV or 11KV [Pit digging- size(3x2x0.6) = 3.6 cu. Mtr,Base filling by Kopra in case ofBlack cotton soil-1.92 cmt., concreting, curing and back filling of pits ] |
| 359 | Erection of Plinth per VCB- 33KV or 11KV [Pit digging- size(3x2x0.6) = 3.6 cu. Mtr,Base filling by Kopra in case of Black cotton soil-1.92 cmt., concreting, curing and backfilling of pits |
| 360 | BI-METALLIC CLAMPS SUITABLE FOR 25MM DIA STUD AND 300SQMM CABLE |
| 361 | Supply of BI-METALLIC CLAMPS SUITABLE FOR 25MM DIA STUD AND 300SQMM CABLE |
| 362 | LT XLPE under ground cable Single Core (Armoured)300 Sq. mm 1100 V Water swellable tape above insulation andoutersheath shall be of ST7 (HDPE) Compound IS 7098, IS 8130, IS:5831 and latest relevant IS |
| 363 | LT XLPE under ground cable Single Core (Armoured)300 Sq. mm 1100 V Water swellable tape above insulation and outersheath shall be of ST7 (HDPE) Compound IS 7098,IS 8130, IS:5831 and latest relevant IS |
| 364 | G.I. Wires 6 SWG |
| 365 | Earthing Set |
| 366 | EARTHING SET (DTR EARTHING) AS PER CIRCULAR NO 1516 DATED 17.03.08 (EARTHING SET 40MM , 3 METER GI PIPE , GI WIRE, EARTHING CLMAP ANDNUT BOLT)(SET) |
| 367 | M.S.Nuts and Bolts |
| 368 | M S BOLT WITH NUT |
| 369 | EARTHING (50x6mm MS Flat-2.36 Kg/mtr.) FOR VCB-5mtr.+ CT-8 mtr.+ ME-20 mtr.+ LA-30 mtr.+ Isolator-12 mtr.+ Isolator handle-4 mtr.=79 mtr. |
| 370 | M S FLAT 50X6 MM |
| 371 | Sundries as M-Seal Putty, LPG,Kerocin / other accessaries etc. |
| 372 | Sundries as M-Seal Putty, LPG,Kerocin / other accessaries etc. |
| 373 | BI-METALLIC CLAMPS SUITABLE FOR 25MM DIA STUD |
| 374 | BI-METALLIC CLAMPS SUITABLE FOR 25MM DIA STUD |
| 375 | 9 KV Gapless type Metal oxide (10 KA) Polymer for 33/11 kv S/s type |
| 376 | 9 KV Gapless type Metal oxide (10 KA) Polymer for 33/11 kv S/s type |
| 377 | XLPE CABLE 11 KV ARMOURED 3X300 SQMM |
| 378 | XLPE CABLE 11 KV ARMOURED 3X300 SQMM |
| 379 | GI Pipe 150 mm A Grade along DP |
| 380 | GI PIPE 150 MM A GRADE ALONG DP |
| 381 | Earthing Set |
| 382 | EARTHING SET (DTR EARTHING) AS PER CIRCULAR NO 1516 DATED 17.03.08 (EARTHING SET 40MM , 3 METER GI PIPE , GI WIRE, EARTHING CLMAP ANDNUT BOLT)(SET) |
| 383 | M.S.Nuts and Bolts |
| 384 | M S BOLT WITH NUT |
| 385 | Heat shrinkable cable jointing kit with lugs for 11 kV grade XLPE cable for 3x300 sq mm |
| 386 | Errection of END TERMINATION SUITABLE FOR 11 KV 3 CORE 300 SQ MM UNDERGROUND XLPE CABLE(set) |
| 387 | EARTHING (50x6mm MS Flat-2.36 Kg/mtr.) FOR VCB-5mtr.+ CT-8 mtr.+ ME-20 mtr.+ LA-30 mtr.+ Isolator-12 mtr.+ Isolator handle-4 mtr.=79 mtr. |
| 388 | M S FLAT 50X6 MM |
| 389 | Sundries as M-Seal Putty, LPG,Kerocin / other accessaries etc. |
| 390 | Sundries as M-Seal Putty, LPG,Kerocin / other accessaries etc. |
| 391 | GI Wire 6 SWG (8 mtr/kg) for guarding |
| 392 | GI Wire 6 SWG (8 mtr/kg) for guarding |
| 393 | Transparent poly carbonatebox for Single phase electronic meter replecement of exeisting meter |
| 394 | Transparent poly carbonatebox for Single phase electronic meter replecement of exeisting meter |
| 395 | PVC insulated 2 core 6 sqmm Armoured Aluminium conductor 1100 Volts |
| 396 | PVC insulated 2 core 6 sqmm Armoured Aluminium conductor 1100 Volts |
| 397 | G.I. Wires 6 SWG |
| 398 | M.S.Nuts and Bolts |
| 399 | M S BOLT WITH NUT |
| 400 | GI Wire 6 SWG (8 mtr/kg) for guarding |
| 401 | PUSH FIT TYPE POLY CARBONATE METER BOX FOR 3-PHASE METER ( CUP BOARD) |
| 402 | PUSH FIT TYPE POLY CARBONATE METER BOX FOR 3-PHASE METER ( CUP BOARD) |
| 403 | PVC CABLE 4 CORE ARMOURED 16 SQMM ALUMINIUM CONDUCTOR |
| 404 | PVC insulated 4 core 16 sqmm Armoured Aluminium conductor 1100 Volts |
| 405 | G.I. Wires 6 SWG |
| 406 | M.S.Nuts and Bolts |
| 407 | M S BOLT WITH NUT |
| 408 | GI Wire 6 SWG (8 mtr/kg) for guarding |
| 409 | PVC CABLE 3.5 CORE ARMOURED 70 SQMM ALUMINIUM CONDUCTOR |
| 410 | PVC CABLE 3.5 CORE ARMOURED 70 SQMM ALUMINIUM CONDUCTOR |
| 411 | PVC CABLE 3.5 CORE ARMOURED 35 SQMM ALUMINIUM CONDUCTOR |
| 412 | ERRECTION OF PVC insulated 3.5 core 35 sqmm Armoured Aluminium conductor 1100 Volts |
| 413 | STRAIGHT THROUGH HEAT SHRINKABLE CABLEJOINTING KIT WITH LUGS FOR 11 KV GRADE XLPE CABLE FOR 3 CORE 300 SQ MM |
| 414 | Provision for Temporary HT/LT Line Shifting work Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
