|
| 1 | Taking down cement plaster on stone masonry/Brick Masonry incl racking out joints, hacking for key scrubbing down with water and direction by Engr- In Charge. |
| 2 | M&L for 10 mm rendering in CM 1:6 on fair face of brick work or on concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | M&L for 05 mm rendering in CM 1:3 on fair face of ceiling or on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for 10 mm rendering in CM 1:4 on fair face of wall or on concrete surfaces finished even and fair with water profinfing compound (WPC) complete all as specified and directed.(WPC Measured seprately) |
| 5 | M &L for Preparation of new plastered surface of wall and applying two coat of oil emulsion distemper of approved tints over application of wall care putty average thickness of 2mm over a coat of interior wall primer complete all as specified and directed by Engineer-in-Charge.. |
| 6 | M &L for Preparation of new plastered surface of Ceiling and applying two coat of oil emulsion distemper of approved tints over a coat of interior wall primer complete all as specified and directed by Engineer-in-Charge.. |
| 7 | M&L preparation of new wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint of required shade, , having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface, at any location including necessary scaffolding arrangement as required at site complete all as specified and-as-directed. |
| 8 | M&L for complete removal of existing treatment incl preparation of wall surfaces and fill the crack of wall with crack filler paste and applying two coat of oil emulsion distemper of approved tints over a coat of interior wall primer, complete all as specified and directed by Engineer-in-Charge. |
| 9 | M&L for complete removal of existing treatment incl preparation of ceiling surfaces and fill the crack of ceiling with crack filler paste and applying two coat of oil emulsion distemper of approved tints on ceiling over a coat of interior wall/ceiling primer complete all as specified and directed by Engineer-in-Charge.. |
| 10 | M&L for complete removal of existing treatment incl preparation of wall surfaces and fill the crack of wall with crack filler paste and applying Two or more coats of 100% Premium acrylic emulsion paint of required shade, , having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm, including necessary scaffolding arrangement as required at site complete all as specified and-as-directed. |
| 11 | Dismantling of Wall panneling and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed |
| 12 | M&L 4 mm thick E-board Tile false ceiling with powder coated GI snap grid frame work complete all as specified and directed include all necessary drilling, cutting making good and necessary arrangement to fix electrical item as under:-(a) 25x25x1.5 mm thick GI Tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter wall.(b) 25x25x1.5 mm thick GI angle powder coated plugged @ 600mm center to center along perimeter of wall.(c) Fixing of 4mm thick E-Board tiles of size 595x595 mm of approved texture, and finished complete with two coats of oil emusion distemper on disturbed portion of ceiling/wall of approved Tint/ Colour shade over a coat of Primer, complete all as specified and as directed.NOTE: The complete ceiling work shall be done as per manufacturers instruction and as directed. |
| 13 | Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed. |
| 14 | Providing and fixing factory made aluminium casement windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60 x 44.45 x 1.00 mm and shutters made of 50.30 x 26 x 1.00 mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36 mm dia and 1.40 mm aperature in inner shutters complete fixed in all respect as specified including supply and fixing following items :(a) Stainless Steel (304 Grade) Finished Butt Hinges 100mm - 2 nos per leaf(b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf(c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf |
| 15 | M&L powder coated aluminium, frame for ,doors, window, ventilators, partion and sliding shutters etc (minimum thickness of powder coating is 50 mixcron) with one or more rebates including jointing cleat, aluminium snap beading 20 x 15mm, rubber gasket, glazing clip for fixing etc .complete all as specified. |
| 16 | Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as specified and as per drawing. |
| 17 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification incl the fwg S & F As approved by Accepting Officer(a) Stainless Steel (304 Grade) Finished Tower Bolt 150mm long - 2 Nos per leaf(b) Stainless Steel (304 Grade) Finished Handles 150 mm - 2 Nos per leaf(c) Stainless Steel (304 Grade) Butt Hinges 100 mm - 3 Nos per leaf |
| 18 | S&F anodised aluminium grill made out of 7mm x 4.5mm w'ide flat, square ractangular or similar section, fixed at window/door shutter or fixed with channel of size 38mm x 12mm x 13mm as required. complete all as specified and directed (make: DECO GRILL No. DG 102 with aperture- 80mm or equipment as approved by GE. |
| 19 | S&F 5mm thick tinted sheet glass of approved make and shade/tint filling in aluminium panels door/window/partion with necessary joining cleats, beading all as specified and directed. |
| 20 | S & F Pressed steel frames made of MS sheet of 1.20mm thickness of size 165 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items). As approved by Accepting Officer |
| 21 | S & F Pressed steel frames made of MS sheet of 1.20mm thickness of size 105 x 60 mm for doors with single or double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts, PCC 1:3:6 type C-0 in fillinng inside frame & hold fasts etc complete all as specified. (Note :- Distrubed protion of existing floor/ wall/ tile/ plaster etc during fixing of chowkhats shall be repaired to match with exisitng finish. Cost of the same will be included in this items). As approved by Accepting Officer |
| 22 | S & F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-I section 8 clause 8.20 (a) kiln seasoned and chemically pressure treated all as specifeid including stainless steel 304 grade wire cloth ( 0.36mm nominal dia of wire and average width of aperture 1.40 mm ) and incl supply and fixing following items:-(a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf(d) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos per leaf |
| 23 | S&F for mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate and incl welding complete all as specified and as directed. |
| 24 | Supply and fixing 30mm thick flush shutters, solid core construction, with block board core and plywood face panels,commercial type on both sidesa all as specifid and directed incl S & F fwg items As approved by Accepting Officer.(a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf(b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf(c) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm-1 No per leaf(d) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf |
| 25 | S&F 100mm size MS butt hinges and fixed to PVC frame /Wooden Frame and angle iron frame by necessary welding complete all as directed. |
| 26 | M&L for preparation of new wooden surfaces of any description, over 10cm in width or girth, not otherwise specified with two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed. |
| 27 | S&F in repair Plain (white) PVC Celuka Ply Board in Door, Shelves for Cup Boards or Kitchen Cabinets, one side laminated, one side plain 18/19mm thick as reqd, jointed by means of PVC adhesive Solvent and fixed using self tapping SS screws complete all as specified and directed. |
| 28 | S&F in repair Plain (white) PVC Celuka Ply Board in Door, Shelves for Cup Boards or Kitchen Cabinets, both side plain 18/19mm thick as reqd, jointed by means of PVC adhesive Solvent and fixed using self tapping SS screws complete all as specified and directed. |
| 29 | S & F of hydraulic cabinet lifter having size 300mm long for wardrobe / overhead kitchen cabinet etc, complete all as specified and directed by Engg-in-charge. |
| 30 | S&F stainless steel bow handle not less than150mm long, complete all as specified and directed. |
| 31 | S&F 75mm size SS butt hinges and fixed to PVC frame /Wooden Frame and angle iron frame by necessary welding complete all as directed. |
| 32 | S & F for Rotational moulded polyethylene water storage tanks of 1000 Litres capacity, (cylindrical vertical tanks with closed top) hoisted and fixed in position including making necessary arrangements for fixing inlet, outlet, 15mm bore Float Valve and over flow pipe and provision of wash out pipe etc including taking down existing tank complete . |
| 33 | S&F 20/25 mm dia gun metal ,globe or gate valves , with iron wheel head , screwed both ends for iron pipe |
| 34 | S&F in repair Stainless steel tubing of 20 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets & finials fency type, stops fixed with ss screws etc all as specified & directed.Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered as approved by accepting officer. |
| 35 | S&F in repair for 16mm bore of CPVC of food grade pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down or up existing GI tubing/CPVC pipes & connections all as specified and directed by Engr-in-charge. |
| 36 | S&F in repair 20mm (OD) CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches/ walls and ceiling including taking down or up existing GI tubing / CPVC pipes & connections all as specified and directed by Engr-in-charge. |
| 37 | Supply & Fixing in repair 25 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge. |
| 38 | S&F in repair 15 mm dia bib tap,fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed all as specified anddirected. |
| 39 | S&F in repair 15 mm bore fancy type chromium plated sink cock with swinging spout (wall mounted model) with wall flange and fixed complete all as specified and directed. Make : Jaquar queen series Cat Part No QQT-7167B or equivalent. |
| 40 | S&F in repair 15mm bore CP fancy type stop valves/angle cock, cast copper alloy, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 41 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed. |
| 42 | Supply & Fixing in repair Brass CP wall Mixer 2 in 1 System with provision for overhead or hand shower suitable for 15mm bore of pipe and fixed complete all as specified and directed. |
| 43 | S&F in repairs 15mm dia Bib tap (2 in 1 type) of brass, chromium plated fancy type glossy finish fixed in repairs complete all as specified and directed. |
| 44 | S & F in repair Vitreous china premium/1st quality wash basin (under counter), white, size 550x400 mm including S&F all accessories as recommended by manufacturer complete fixed in position in all respect as per manufacturer's instructions and all as specified including all Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, Note : The items for counter will be measured and paid separately. |
| 45 | S&f in repair 15mm bore pillar tap cast copper alloy fancy type with capston heads, chromium plated screwed down high pressure, with or without letters Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipes and fixed all as specified and directed. |
| 46 | S & F in repair Flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, , low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete in all respect all as specified. |
| 47 | S&F in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain and in flushing pipe complete including 'P' or 'S' trap and including plastic water closet seat cover with flat bottom and cover with MS Chromium plated hinge divice ISI marked complete all as specified and directed . |
| 48 | S & F in repair Vitreous china squatting pan of Orissa patten size 580 x 440 white colour including CI S/P trap long size as directed joint run and lead front or back inlet with integral footrest including connection to trap and to flushing pipe,anti-syphonage pipe, etc, fixed in repair complete and making good to floor in PCC 1:2:4 all as directed and specified. |
| 49 | S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plug , washer and wastes , including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe , overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified. |
| 50 | S&F in repairs stainless steel plate rack of 600X750X250mm fixed to wall complete all as specified and directed by Enginer in charge. |
| 51 | S&F in repair PVC connection 15mm bore length not less than 600 mm long with both ends PTMT nuts complete all as specified. |
| 52 | S&F in repairs 75mm bore PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 53 | S&F in repairs 110mm dia PVC (SWR) pipes single socketed in any length with rubber joints fixed to walls or laid in floors etc complete. |
| 54 | S&F in repairs PVC (SWR) bends 110mm dia any radius |
| 55 | S&F in repairs PVC (SWR) junction single,(Single T) 110mm dia equal or unequal |
| 56 | S&F in repairs chromium plated swivel shower roses with or without swivel joints, for fixing with 15mm pipe fixed all as specified |
| 57 | S&f in repair 600X450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 58 | S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 59 | Supply & Fixing in replacement Corner glass shelf size 200 mm radius with and including bracket and glass complete set etc. |
| 60 | S&F in repairs tubular towel rail, brass cromium plated, 20mm dia, D type, 60cm long between flanges complete all as specified and directed Engrs-In Charge. |
| 61 | Dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to stores and removing debris outside the MD land. |
| 62 | S&F Vitrified ceramic tiles in light shade 10mm thick (square/ractangular) polished,area of each tiles exc 0.18 sqm but not exc 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4, complete all as specified and directed |
| 63 | Ditto as item above but as in skirting over cement mortar backing plaster in CM1:4 15mm thick |
| 64 | S&F Non-Skid ceramic Coloured tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified. |
| 65 | M&L for Glazed ceramic glossy finish tiles coloured in vertical surface 450X300X7mm in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 66 | M&L for 300mmx300mmx10mm thick non skid polka dots parking floor paver tiles with grey cement and pigment, over and including 15mm thick screed in CM (1:4), set jointed & pointed in neat cement slurry in floors complete all as specified and directed. |
| 67 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar. Note : Work will be in patches or in bulk |
| 68 | M & L for Granite of black / green / imperial red (colour as approved by Accepting Officer) of any type machine cut as in shelves/steps/counter tops, 20 mm thick, set and jointed in cement slurry over & including screed of 15 mm thick / rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab or with suitable adhesive for fixing on unpolished kota stone slabs and including rubbing, cutting and mirror type polishing and bull nose on exposed sides complete all as specified .Note : Single piece should be used in steps/cills/jambs/shelves or equivalent as approved by accepting officer . |
| 69 | M&L for dressed stone slabs 50mm thickness in shelves, chajjas sand stone slabs in sumshades, chajjas, shelves, cills landing cover stone, templates etc n ex 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4 complete all as specified and directed |
| 70 | Demolition of cement Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed |
| 71 | M&L 75mm thick cement concrete type D-2, 1:4:8 (40mm graded crushed stone aggregate) finishing cement concrete surface even and smooth without using extra cement as specified and directed. |
| 72 | M&L for 25mm thk PCC 1:2:4 type B0 using 12.5mm graded stone aggregate as in subbase of floors & finishing the surface even & smooth without using extra cement. |
| 73 | M&L for cement concrete in foundations, filling and mass concrete type D2 1:4:8 (40mm graded aggregate) |
| 74 | M&L for 75mm thick plain cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection finished even and smooth without using extra cement, including making joints to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:2 by weight complete all as specified and as directed. |
| 75 | Demolition of cement concrete ( unreinforced) in roofs , floors (other than ground floors) beams, staircases,landing, chajjas and similar suspended work |
| 76 | M/L plain cement concrete 1:2:4 type B1 using 12.5 mm graded aggregate as in roof for maint. the uniform slope etc any thickness at any height and in any position all as specified and directed by engr-in-charge at site. |
| 77 | M&L Applying evenly a coat of bituminous primer confirming to IS 3384 - 1986 @ 0.40 Kg/Sqm |
| 78 | M&L APP based polymeric membrane minimum weight 3 Kg/Sqm and minimum 3 mm thick reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete all as specified |
| 79 | Supply only liquid water proofing compound ( For external new plaster surfaces) |
| 80 | Dismantling of plain or corrugated steel sheets in roof coverings any type complete all as specified & directed by Engineer in charge. |
| 81 | S&F Pre- painted galvaiume aluminum zinc coating GI based corrugated steel sheet 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping crews as specified complete all as specified and directed |
| 82 | Dismantling structural steel work including doors gates but excluding framed truss etc complete all as specified and directed |
| 83 | S&F for hollow,rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conf to Fe-410-w or E -250 quality A complete all as specified and directed. |
| 84 | M&L applying two coats of synthetic enamel paints on new steel surfaces over a coat of red oxide primer including surface preparation complete all as specified and directed. |
| 85 | Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified. |
| 86 | M&L for precast-cement concrete block masonary with solid blocks type C-1 ,1:3:6 (20mm graded aggregates) exc 10 cm in width and setting in CM 1:4 ,complete all as specified and directed |
| 87 | M&L for 10 mm rendering in CM 1:4 on fair face of block masonary / stone masonary wall or on concrete surfaces finished even and fair with complete all as specified and directed. |
| 88 | M&L for Statick Water Tank, surface excavation, excavation over areas at any type of soil, Cement concreter in foundation D2 1:4:8, form work to footing, bases of column, raft, raft beams and retaining wall, RCC (M-30), Nominal Mix in retaining wall and founation, footing wtih 8mm bar, 5mm plaster in CM 1:4 to exposed concrete surfaces, plinth protection of PCC 1:3:6 over broken aggregate Hardcore over rammed earth. Complete all as specified and directed by Engr-in-Charge (Size of internal Dia 10950mm and Depth 2350mm(TD Drg No - CEJZ/STR/STD/19/2016) |
| 89 | S&F 150mm bore UPVC pipe (SCH-40) in any length with rubber ring joints laid on trenches or in floors /wall complete all as specified and as directed. |
| 90 | S&F UPVC pipe (SCH-40) bend, Junction single Each [single \\"T\\" or \\"Y\\"] equal or unequal of 150mm complete all as specified and directed |
| 91 | S & F of stack clamps made out of 50 X 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 150mm bore UPVC pipe complete all as specified and as directed |
| 92 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth.for foundation etc or for shafs, wells, cesspits, manoles pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified and as directed |
| 93 | M&L for preparation of new plastered surfaces of external walls/RCC surfaces/soffits of chajjas/roof projection/cantilivers/balcony etc including cornices and applying two coat of cement base paint as, complete all as specified and as directed |
| 94 | Taking down old, unsv aluminium/copper point wiring (light, fan, socket or power) complete, incl fixture & fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. |
| 95 | Taking down old sub-main wiring incl fixture & fittings etc. removing materials to store for keeping in safe custody or for taking credit & making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed by Engr-in-Charge. |
| 96 | Disconnecting/dismantling of old existing un serviceable DB's along with metal enclosue concealed in walls of any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc.incl making good the disturbed surfaces and matching with existing surfces complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
| 97 | Disconnecting/dismantling of old existing un serviceable DB's along with metal enclosue concealed in walls of any type/way 240/415 Volts with their old/un serviceable burnt MCCB/MCB's etc.incl making good the disturbed surfaces and matching with existing surfces complete all as specified and directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
