|
| 1 | Demolition of unreinforced cement concrete in ground floors etc and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L PCC (1:4:8) type-D2 (using 40mm graded crushed stone aggregate) as in mass conc. and sub base complete all as specified and directed by Engr-in-Chargre. |
| 3 | M&L for 25mm thick (1:2:4) Type-B-1 (using 12.5mm graded crushed stone aggregate) as in level course of flooring complete all as specified and directed by Engr-in-Chargre. |
| 4 | M&L non skid / anti skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including dismantling of tiles and laid over 15mm thick screed bed in CM (1:6) compete all as specified and directed by Engr-in-Charge |
| 5 | M&L non skid ceramic tiles coloured pattern as required of 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including dismantling of tiles and laid over15mm thick screed bed in CM (1:6) compete all as specified and directed by Engr-in-Charge |
| 6 | Description all as per ser item No.4.00 & 5.00 above but on skirting over with and including 10mm thick backing coat in CM 1:4 with complete all as specified and directed by Engr-in-Charge. |
| 7 | M&L vitrified ceramic tiles coloured pattern as required 10mm thick (Square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matches with and including dismantling of tiles and laid over 15mm thick screed bed in CM 1:6 compete all as specified and directed by Engr-in-Charge |
| 8 | Description all as per ser item No.7.00 above but on skirting over with and including dismantling of tiles and laid over including 10mm thick backing coat in CM 1:4 complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 350x250x7 or 450x350x7 or 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 10 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 11 | M & L Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed by Engr-in-Charge. |
| 12 | M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than .034 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 13 | M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:4) to receive Kota Stone complete all as specified and directed by Engr-in-Charge.. |
| 14 | M&L Granite (of any type) tiles, 18-20 mm thick machine cut laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:4 and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed by Engr-in-Charge. |
| 15 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-Charge. |
| 16 | M & L Granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling floor hearth or wall tiling complete all as specified and directed by Engr-in-Charge. |
| 17 | M&L PCC (1:2:4) using 12.50 mm graded aggregate laying under bottom of the sunken floor finished even and smooth dcomplete all as specified and directed by the Engr-in-Charge. |
| 18 | M&L cement concrete 1:7:12 with brick course aggregate as in filling in sunk floors complete all as directed by Engr-in-Charge. |
| 19 | M&L treatment for sunken portion with and including 10mm thick cement plaster in CM 1:3 mixed with liquid WPC @ 200ml per bag of cement when concrete surface is green. Over after dry of plaster surface two coats of industrial bitumen 85/25 laid @ 1.20Kg/Sqm incl cleaning of surface over 150 micron PVC films laid when bitumen is hot complete all as specified and directed by Engr-in-Chagre. (Note : WPC , bitumen, PVC films are inclded in the items. |
| 20 | M&L GI tubing as in spout pipe medium grade 32mm bore including of required shape all as specified and directed. |
| 21 | Dismantling structural steel work including doors, gates but excluding framed truss etc.. complete all as specified and directed by Engineer-in-Charge. |
| 22 | S&F in repair Roof trusses (framed), trussed, purlins, rafter, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed by Engineer-in-Charge. |
| 23 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed. |
| 24 | S&F 0.63 galvanised, corrugated mild steel sheeting with two corrugation side lap fixed with J or L type hooks in roofs, walls etc. with grade of zinc coating 275 complete all as specified and directed. |
| 25 | S&F 1.00 mm thick plain galvanised,mild steel sheeting, with grade of zinc coating 275 as in ridges, hips vally gutters drip and straight flashing (length and grith as fixed) complete all as specified and directed. |
| 26 | Preparing new zinc (or galvanised) and steel surfaces to receive painting, by coating with mordant solution including washing and cleaning, etc. iron surfaces as in roofings exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified. |
| 27 | S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.completed all as specified and directed by Engr-in-Charge. |
| 28 | S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete with and including dismantling plain steel sheeting, any gauge, thickness, including nainital or similar roof coverings and eaves boards of any description complete all as specified and directed.completed all as specified and directed by Engr-in-Charge. |
| 29 | S&F 12mm thick Gypsum board for ceiling fixed with GI Powder coated snap grid 605 x 605mm frame work as in false ceiling including hangers 4mm dia GI wire (upto 1200mm centre to centre upto length as required at site) and adjusting level fixed to roof wooden member by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners complete with and including dismantling ceiling baords of any description of any thickness incl cover fillets complete all as specified and directed by Engr-in-Charge. |
| 30 | S&F plywood grade BWR, Type-BB, 4mm thick fixed with nalis to wooden frame work as in ceiling with and including 2nd class soft wood cover fillets as required with and including dismantling ceiling baords of any description of anyt thickness incl cover fillets complete all as specified and directed by Engr-in-Charge. |
| 31 | S&F Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially ormulated jointing compound and 48 mm wide fibre tape to provide seam less finish with and including dismantling wall and ceiling baords of any description complete all as specified and directed by Engr-in-Charge. |
| 32 | M&L for 4mm veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face decorative veneer and one face plain of required texture & colour fixed with nails to timber frame work for any surface with and including dismantling wall and ceiling baords of any description complete all as specified and directed by Engr-in-Charge. |
| 33 | M&L for 12-25 mm thick 2nd softwood planed one side & edges tongued and grooved or rebated, and fixed with and including dismantling wall and ceiling baords of any description complete all as specified and directed by Engr-in-Charge. |
| 34 | S&F for 2nd class hardwood (wrought) in scantling for timber frame and fixed with and including dismantiling timber scantling 40 sqcm and over insection in any position for framed work complete all as specified and directed by Engr-in-Charge. |
| 35 | M&L for second class hardwood plain fillets in square, rectangular or triangular in section, clean sawn, secured with nails or borads exc 13 Sq.cm & n.exc 25 Sq.cm with and including dismantling of fillets of any description complete all as specified and directed by Engr-in-Charge. |
| 36 | S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in shelves, partition and lineing with and including stainless steel cleats 02 number each side with and including dismantling boarding, any description , fixed in any position with nails complete all as specified and directed by Engr-in-Charge. |
| 37 | S&F in repair 0.9mm thick decorative laminate type-1, of surface finish, colour and pattern as approved fixed with approved adhesive as per marker's instructions complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for second class hardwood plain fillets in square, rectangular or triangular in section, clean sawn, secured with nails or borads exc 3 Sq.cm & n.exc 6 Sq.cm with and including two coat of french polish complete all as specified and directed by Engr-in-Charge . |
| 39 | S&F hasp and staple safety type 100 mm size, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed including taking down old one . |
| 40 | S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed . |
| 41 | S&F Stainless Steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed. |
| 42 | S&F 125mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed by Engr-in-Charge. |
| 43 | M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrurbbing down with water and disposing of the rubbish complete all as specified and directed by Engr-in-Charge. |
| 44 | M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge. |
| 45 | M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge. |
| 46 | M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description and other surface and finishing the surfaces even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 47 | M&L for preparing new plastered or unplastered surfaces on walls & other surface and applying two coats of oil emulsion distemper over a coat of 3 mm wall care putty with rubbing or smoothing of surface upto ture finish over a coat of water base primer complete all as specified and directed by Engr-in-Charge. |
| 48 | S&F 15 mm dia steel water GI tube medium grade with all fittings and fixed with concealed to walls, ceilings or laid in floors complete with and including taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge. |
| 49 | M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge. |
| 50 | S&F in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. |
| 51 | S&F in repair 15 mm bib tap cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed including taking down old one. |
| 52 | S&F in repair brass Chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or unionincluding taking down old one. |
| 53 | S&F in repair CP angle valves (half turn type)/ conclead type (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed including taking down old one. |
| 54 | S&F in repair 15 mm dia CP Wall Mixer Telephonic with Crutch (Provision for hand shower) and complete set of hand shower (Make : Prayag ) complete all as specified and directed. |
| 55 | S&F in repair 15 mm dia CP Central Hole Basin Mixer without Pop-up waste system (Make : Prayag) complete all as specified and directed. |
| 56 | S&F in repair 15 mm dia CP Sink Mixer with regular spout (W/M) (Make : Prayag) complete all as specified and directed. |
| 57 | S&F in repair Vitrous china wash hand basin, white, flat back of size 630 x 450 mm white excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets including PTMT waste coupling as suitable complete all as specified and directed by the Engr-in-Charge. |
| 58 | S&F in repair Vitrous china wash hand basin with full pedestal of size 835 x 560x440mm white or cream colour excluding taps, waste, chain and plug and porcelain stopper but including bracket, cutting for and pinning the ends of brackets all as specified. |
| 59 | S&F in repair sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed by Engr-in-Charge. |
| 60 | S&F waste pipe for kitchen snik and WHB of size 32/40mm dia upto 900 length complete all as specified and directed by Engr-in-Charge. |
| 61 | S&F CP grating dome 100 mm dia (minimum weight 25 gms) complete all as specified and directed including taking out old one. |
| 62 | S&F in repair Vitreous China wash down water closet pan (one piece), white with P or S trap with and including plastic water closet seat cover , connection to trap, flushing pipe & anti -syphonage pipe etc including necessary materials for fittings & making good to floor complete all as specified and directed by Engr-in-Charge. |
| 63 | S&F in repair vitreous China, squatting pan, Orissa Pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one. |
| 64 | S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed. |
| 65 | S&F in repair 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one. |
| 66 | S&F in repair 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one. |
| 67 | S & F powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick.(e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float . (g) Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. |
| 68 | S & F powder coated aluminium sliding glazed windows with three track , three shutter sliding with following specification and making good the adjacent side etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick.(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(iv) 4 mm thick tinted glass superior quality.(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(vii) Sliding rollers per shutter - 02 Nos.(viii) Aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56mm for shutters 01 Nos.(Ix) fixing screw for frame with wall per windows- 08 Nos |
| 69 | Hacking out old broken glass pane (any thickness , size, quality or description) from steel frame glazed with putty or fixed with beads. |
| 70 | M & L for 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane. |
| 71 | M & L for 4 mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane. |
| 72 | S & F in repairs Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed. |
| 73 | Supply only Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm |
| 74 | Taking down shutter of any description n exc. 1 Sqm each complete. |
| 75 | Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each complete. |
| 76 | Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete. |
| 77 | Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame ) |
| 78 | M & L 2 nd class hard wood Plain solid , straight chowkhats and frames wrought, framed on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as directed and directed. |
| 79 | M & L for PCC 1:2:4 type C-1 (using 12.50 mm graded stone aggregate) as in hold fasts including necessary use and waste of form work complete all as specified and directed. |
| 80 | M&L Lagging to pipes used in internal water supply (internal dia of pipe 15mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed by the Engr-in-Charge. |
| 81 | M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed. |
| 82 | S & F 30 mm thick Flush shutters , solid core construction, with block board core and plywood face panels one face is covered with decorative face veneer with lipping/ frame to match fixed to chowkats complete all as specified and directed. |
| 83 | S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- wire mesh shall be measured and paid separately in respective supply only item. |
| 84 | S & F 2 nd class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (with sash bar) edges divided into squares, with plain chamfered or rounded , mitred and rebated sash bars of any numbers ,beads, for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item. |
| 85 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete. |
| 86 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 and as directed by GE/Engineer-in-Charge. |
| 87 | S & F 100 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed. |
| 88 | S & F 75 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and directed. |
| 89 | S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete . |
| 90 | S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete. |
| 91 | S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete. |
| 92 | S & F 150 mm size aluminium handles cast type, anodised ISI marked complete |
| 93 | S & F in repairs150mm length floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor complete all as specified and as directed |
| 94 | S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete. |
| 95 | S & F Steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete all as specified and as directed |
| 96 | S & F in repairs door closer cast iron body hydraulically regulated , universal type suitable for door shutters 851mm to 1000mm in width and weight between 61 to 80 kg of aluminum (die cast) body and fixed etc all as specified and as directed |
| 97 | S & F in repairs double action floor spring hudraulically regulated made up minimum 1.25 mm thick aluminium alloy sheet foundation box , main body with stainless cover, governig pivot made of brass other parts made of mild steel heavy duty complete all as specified and as directed. Make : KELWIN or equivqlent of other make as approved by GE. |
| 98 | M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed. |
| 99 | M & L Preparation of Old wood painted surfaces of any description , not otherwise description, over 10 cm width or grith apply one coat of synthetic enemel paint (ordinary tint) complete all as specifed and directed. |
| 100 | M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 101 | S&F rotational moulded polythene water storage tank 500 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 250 liters but not excedding 500 Ltrs and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge. |
| 102 | S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 500 liters but not excedding 1000 Ltrs and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge. |
| 103 | M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed. |
| 104 | S & F one piece floor mounted vitreous china EWC with integrated flushing cistern , soft closing seat cover, health faucet pvc connection etc including necessary fittings and fixtures, nut bolt for fixing complete all as specified and directed . |
| 105 | S & F PVC 5 to 6 mm thick hollow PVC wall panelling including all fixing viz, U and L as design and pattern including all necessary framed works as per manufacturers instructions, make and design fixing complete all as specified and directed. |
| 106 | S & F Stainless sensys soft close 0 crank concealed slide on cabinet hinge , a abse of 12.5 (crank 0 degree) with mounting plate(shutter thickness 15-24mm) complete all as specifeid and directed by Engr-in-charge. |
| 107 | S & F Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws fixing complete all as specified and directed. |
| 108 | (a) Cleaning /clearing and maintenance of sewage lines, manholes including CI/PVC stacks, gully traps, floor traps, under ground lines any depth by removing any type of blockage from drain / drain pipe upto and including 250mm dia by mechanical machine method / manually (using pipe cleaning machine with auger function standard or specialised / manually) from manholes and flushing with water with pressure using water hose pipe connected with water trolleys after cleaning including manholes, sludges/sludge effluent to be disposed off as directed by Engr-in-Charge including taking off manholes covers and re-fixing the same after cleaning of sewage lines/manholes cleared/cleaned. Under this item are to be maintained and kept fully functional by removing any type of blockage for 11 months from the date of commencement of first work order. The cost of this operation/provision shall be deemed to be included in unit rate quoted by the contractor. Also contractor/Supervisor will attend the AGE B&R-I office /complaint cell at 09:00 am to receive complaints and further action within 24 hrs as directed by Engr-n-Charge. |
| 109 | Dewatering of contaminated waste effluent from septic tank/soakage well of any capacity and depth by vehicle mount sewage cleaning machine and jetting and disposal to low lying area upto distance of 5Km including taking off and re-fixing manholes covers etc complete all as specified and directed by Engr-in-Charge. |
| 110 | Cleaning of septic tank of any capacity and depth including inlet chamber, outlet chamber removing out all sludge, silt, residue waste material (organic/inorganic nature) by mount sewage cleaning machine and required manpower after plugging the incoming sewage line and depositing the waste upto 5Km distance and burring the same in suitable size of pit and covering the same with earth and removal of surplus soil all as specified and directed by Engr-in-Charge. |
| 111 | Notes : Rates against item No. 108.00 to 110 includes for:(i) Cleaning and clearing/disposing off all the sludge sewage contaminated water in solid/ semi solid/ liquid state from sewage lines, manholes etc as detailed in above item No. 108.00 to 110 will be carried out during the 1st 3 months from the date of commencement of work order No.1 and there after shall be maintained for blockage free and smooth functioning of all the sewage lines and related sewage items as detailed in item No.1 above for a period of eight months i.e., the date of completion of contract given in work order No.1. Engagement one supervisor alongwith two sweeper cum sewage drain attendant alongwith T&P required on daily basis for a period of eleven month for attending the daily sewage related complaints. The complaints shall be collected daily at 09:00 hours from the office / complaint cell of Engr-in-Charge by Contractor / Contractor's supervisor and shall be got signed from the user occupant after clearing the complaints. These complaint slips will also be got signed at Engr-in-Charge office daily after the satisfactory completion of each complaint. No complaint shall be kept pending / unattended for a period of 48 hours. Any damage to manhole covers, gully trap covers, CI access doors of CI pipes any dia, PVC pipes/fittings, 'P' traps, floor traps during the process of cleaning/clearing shall be made good by the contractor by the contractor by replacing same by new items without any extra cost to the Govt. (ii) If contractor fail to complete the complaint within stipulated period i.e 48 Hrs a recovery of Rs. 300 per complaint per day will be levied. |
| 112 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out from soft and loose soil complete all as specified and directed by Engr-in-Charge. |
| 113 | M&L for returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge. |
| 114 | Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed at a level n. exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge. |
| 115 | M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 100mm bore laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 116 | M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 117 | M&L for salt glazed stoneware (SGSW) grade 'A' drain pipes 200mm bore laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-Charge. |
| 118 | Cutting into existing manhole removing existing drain making good to wall and rendering cutting out branch channel and making good benching for 100mm dia pipe in cement concrete 1:2:4 complete all as specified and directed by Engr-in-Charge. |
| 119 | Description all as per ser item No.118 above, but 150mm dia |
| 120 | Description all as per ser item No.118 above, but 200mm dia |
| 121 | M&L rendering 15 mm thick in CM 1:4 cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed by Engr-in-Charge. |
| 122 | M&L rendering 15 mm thick in CM 1:4 with cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed by Engr-in-Charge. |
| 123 | Demolition of reinforced cement concrete of any descritption and in any position not otherwise speccificallt provided for as directed by Engr-n-Charge. |
| 124 | M&L for precast RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole cover slab and similar article with plain faces, set in cement 1:4 complete all as specified and directed by Engr-in-Charge. |
| 125 | S&F TMT Mild Steel bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.. |
| 126 | Dismantling of cement concrete (unreinforced) of stone aggregate at any position not otherwise specifielly provided for as directed by Engr-in-Charge. |
| 127 | M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed by Engr-in-Charge. |
| 128 | PCC 1:2:4 type B1 (12.5mm graded aggregate ) as in coping including necessary form work complete all as specified and directed by Engr-in-Charge. |
| 129 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes complete all as specified and directed by Engr-in-Charge. |
| 130 | S&F 75 in repair mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes complete all as specified and directed by Engr-in-Charge. |
| 131 | S&F in repair 110 mm PVC (SWR) access door bends any radius including taking down old complete all as specified and directed by Engr-in-Charge. |
| 132 | S&F in repair 75 mm PVC (SWR) access door bends any radius including taking down old complete all as specified and directed by Engr-in-Charge. |
| 133 | S&F in repair 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge. |
| 134 | S&F in repair 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge. |
| 135 | S&F in repair 110mm PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge. |
| 136 | S & F in repair cast iron pipe 75mm bore fixed with walls complete all as specified and directed by Engr-in-Charge. |
| 137 | S & F in repair cast iron pipe 100mm bore fixed with walls complete all as specified and directed by Engr-in-Charge. |
| 138 | M&L Reinforced NP2 pipe of 100 mm dia laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up existing drain pipes of any description ( like PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed. |
| 139 | M&L Reinforced NP2 pipe of 150 mm dia laid in trenches and jointed on concrete bed including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 with and including demolition and breaking up existing drain pipes of any description ( like PVC, salt glazed ware, AC or reinforced concrete) set in cement mortar complete all as specified and as directed. |
| 140 | S & F Bends (any radius), diminishing pieces or tapers for 75 mm connecting pipes complete all as directed and specified. |
| 141 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
