|
| 1 | Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.. |
| 2 | M&L 15 mm thick cement plaster on fair faces of bricks or concrete walls in CM 1:6 finished even and smooth with out using extra cement on brick work or concrete surfaces complete all as specified. |
| 3 | M&L for rendering 15 mm thick on fair faces of bricks or concrete walls in CM 1:4 finished even and smooth with out using extra cement on brick work or concrete surfaces complete all as specified (incl all necessary scaffolding, lifting arrangement for three story building on external surfaces) |
| 4 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distemper using painting roller over one coat of chalk whitening complete all as specified and directed by engineer in charge. |
| 5 | M & L for3mm wall care putty on old/new wall surface complete all as specified and as directed by engineer in charge. |
| 6 | M&L for preparation of old plastered /unplastered surface of brick/concrete wall and applying two coats of oil bound distemper over recently prepared old painted surfaces of wall complete all as specified. |
| 7 | M&L for preparation of existing plastered/ unplastered surface of brick/concrete wall and applying one coat of cement based paint all as specified and directed. |
| 8 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete and all as specified. |
| 9 | M&L for Non skid ceramic white tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.11 but not exc 0.18 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm cement screed bed in CM (1:4) complete all as specified. |
| 10 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) as in skirting etc cut from tiles exc 0.11 but not exc 0.18 Sqm set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick rendering in CM (1:4) complete all as specified. |
| 11 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tiles exc 0.18 but not exc 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15mm cement screed bed in CM (1:4) complete all as specified. |
| 12 | M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) as in skirting cut from tiles of size exc 0.18 but not exc 0.38 Sqm etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick rendering in CM (1:4) complete all as specified. |
| 13 | M&L for glazed coloured ceramic tiles in vertical surfaces such as skirting /dados and riser to steps area of tiles 450x300x7mm thick set and jointed and pointing in white or coloured cement to match over 10 mm thick plaster in CM 1:4 complete all as specified and directed. |
| 14 | M&L Granite (of any type) table rubbed and polished in steps, jambs, pillars, windows, cills, cooking platform and like in CM 1:4 incl pointing in white cement 1:2 using marbl edust with admixture of pigment with match with shade of granitement slurry & pointed with white cement with admixure of pigment to match the shade of granite complete and all as specified. |
| 15 | M & L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed base and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15mm thick screed bed in cm 1:4 complete all as specified and as directed by the Engineer-in-Charge |
| 16 | M&L johnson endura paving coloured tiles of technocommercial equivalent of size 300mmx300mmx10mm set and jointed in neat cement slurry pointed with white or coloured cement laid over and incl 15mm thick screed bed built in CM (1:4) after demolition old floor hearth or wall tiling complete all as specified & directed |
| 17 | M&L Lagging to pipe of internal dia 15mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum Extra over if provided with chicken mesh wire netting 25 gauge, 20mm mesh conforming to IS 9842 complete all as specified and as directed . |
| 18 | Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | S & F for Pre-painted galvatume aluminum zinc coating GI based corrugated (sinusoidal pattern) steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified. |
| 20 | S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screwes or 'J'/'L' hook Upto a height of 10 mtrs as specified complete all as specified. |
| 21 | Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified. |
| 22 | M & L for 25mm thick cement concrete type B-1 1:2:4using 20mm graded aggregate complete all as specified and as directed by the Engineer-in-Charge |
| 23 | M & L for 75mm thick cement concrete type D-2 1:4:8 using 40mm graded aggregate complete all as specified and as directed by the Engineer-in-Charge |
| 24 | M & L for 15mm PVC connection wth PTMT nut length of 600mm complete all as specified and as directed by the Engineer-in-Charge |
| 25 | M & L for 15mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed by the Engineer-in-Charge |
| 26 | M & L for 20mm bore `Medium grade` GI tubing with all fitting and fixed complete to walls and ceilings or laid in floors including taking down existing tubing complete all as specified and as directed by the Engineer-in-Charge |
| 27 | S&F bib taps 15mm dia fancy type brass Chromium Plated with long body screwed down for iron pipe and fixed IN REPAIRS complete all as specified. |
| 28 | S & F of ISI marked fancy type Pillar Tap FIXED IN REPAIR of 15mm bore dia, chromium plated, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge |
| 29 | M&L for 75mm bore PVC(SWR) multi floor trap , plain with gratingincl jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge. |
| 30 | S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge. |
| 31 | S&F in repair for 15 mm dia stop valves fancy type ,chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified. |
| 32 | S&F in repair vitrious china white wash hand basin flat back white in colour ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 type complete all as specified. |
| 33 | S&F in repairs viterous china squatting pan Orrisa pattern size 580 x 440mm white with \\"P\\" and \\"S\\" trap front or back inlet etc including connectipon to trap and to flishing to pipe , anti syphonage pipe etc incl provisioning of lime concrete complete all as specified. |
| 34 | S&F in repairs 10 ltr PVC valveless syphonic action type flushing cistern with brackets flush pipe etc complete including inlet ball valve float and handle including brackets of approved make including all connections & flush pipes for WC complete all as specified. |
| 35 | S&F in repair vitreous china wash down water closet pan ( pedestal pattern) white including connection to out going pipe and to flushing pipe and antysyphonic pipe etc including seat cover complete all as specified. |
| 36 | S&F for Toilet paper holder with flat recessed type stainless steel complete all as specified and directed. |
| 37 | S&F in repair for 450mmx600mm bevelled edge looking mirror of selected quality fixed with brass CP screw fixed with back side of decorative board includind aluminum beading complete all as directed. |
| 38 | S&F for stainless steel sink with draining board made of stainless steel 1 mm thick sheet for kitchen with waste coupling waste pipe , washer and including all necessary item including fixing to brackets and connected union to pipe complete of overall size 915x460 mm with bowl size 410mm x 330mm x 160mm complete all as specified. |
| 39 | S&F in rep plastic water closet seat white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinges device complete all as specified. |
| 40 | S&F for 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified. |
| 41 | S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including dismantling of existing pipes complete all as specified and as directed by the Engineer-in-Charge. |
| 42 | S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified (Make: Prince /Reliance) |
| 43 | S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including dismantling of existing pipes complete all as specified and as directed by the Engineer-in-Charge. |
| 44 | S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified (Make: Prince /Reliance) |
| 45 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by the Engineer-in-Charge. |
| 46 | Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.quality confirming to fFE-410-S complete all as specified and as directed by the Engineer-in-Charge. |
| 47 | M&L providing cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, watertroughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed |
| 48 | S&f for Rotational moulded polyethylene water storage tanks capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified. |
| 49 | S&f for Rotational moulded polyethylene water storage tanks capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified. |
| 50 | S & F in repair for ISI Marked 20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge. |
| 51 | M&L 5 mm thick cement plaster in CM 1:3 on concrete surfaces finished even and smooth with out using extra cement on ceiling complete all as specified. |
| 52 | M&L 15 mm thick cement plaster on fair faces of bricks or concrete walls in CM 1:6 finished even and smooth with out using extra cement on brick work or concrete surfaces complete all as specified. |
| 53 | M & L for complete removal of existing treatment on wall/roof projection incl facia, cornices etc by scraping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, paint etc by skilled labour with mechanical sander having RPM of 1500-2700 rpm, with internal dust extraction system for clean environment, and preparation of old plasterd/scraped surfaces of wall/ceiling by cracks by external wall putty/crack fill paste and applying exterior water proof wall care putty @ 1 Kg(undiluted) per sq mtr. of average thickness 1mm to 2mm over the prepared wall/ceiling surfaces, one or more coats and grinding the puttied surface with mechanical grinder for make the surface even and smooth for recieving primer and applying two or more coats iof 100% Premium acrylic smooth exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali & fungal resisitance exterior paint of required shade (Company depot Tinted) with silicon additives & color stay technology, Excellent dirt pickup resistance @ 1.79 litre/10 sqm diluted with water as per manufacturers instructions over and including priming coat of exterior primer applied @ 0.9 litre (Undiluted)/ 10 sqm over old/new putty surfaces of wall/ceiling complete all as specified and directed. Note:- Paint using Airless spray technology with max working pressure of 3300 PSI and capable of single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed. |
| 54 | M & L for preparation of newely plasterd surfaces on wall/roof projection incl facia, cornices etc and applying exterior water proof wall care putty @ 1 Kg(Undiluted) per sqm mtr. of thickness 1mm to 2mm over the plasterd wall/ceiling surfaces, one or more coats and grinding the puttied surfaces with mechanical grinder for make the surface even and smooth for receiving primer and applying Two or more coats of 100% Premium arylic smooth exterior emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistace, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives & Color stay technology, Excellent dirt pickup resistance @ 1.79 litre/ 10 sqm diluted with water as per manufacturers instructions over and incl primer coat of exterior primer applied @ 0.9 litre (Undiluted) / 10 sqm over old/new putty surfaces of wall/ceiling complete all as specified and directed. Note:- Paint to be applying with using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed. |
| 55 | M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified |
| 56 | M&L for preparation of old plastered /unplastered surface and applying two coats of white/colour wash over recently prepared old plastered surfaces of ceiling complete all as specified. |
| 57 | M&L for preparation of new plastered surfaces of wall and applying two coats of cement based paint over a coat of alkali resisitant primer complete all as specified |
| 58 | M&L for complete removal of existing treatment and applying two coat of cement based paint over recently prepared old plastered surfaces of wall complete all as specified. |
| 59 | M&L for preparation of old plastered /unplastered surface of brick/concrete wall and applying one coats of oil bound distemper over recently prepared old painted surfaces of wall complete all as specified. |
| 60 | M&L for preparation of old surfaces of steel any description over 10 cm width or girth by scrubbing down, removing loose dirt or dust and applying one coats of synthetic enamel paint over prepared old surfaces of steel complete all as specified. |
| 61 | Supply only integrated water proofing compound complete all as specified. |
| 62 | Note for Sl item No 53 and 54:- The work for periodical services shall include the following and the rates quoted by the bidders shall include the same:- (a) The work pertaining to periodical services shall be executed by the contractor as per MOU from authorised applicator through manufacture of the materials like Exterior Emulsion paint putty etc after approval by the GE. (b) The contractor shall upload with the documents under cover I \\"Memoradum of understanding\\" (MOU) with at least one of the manufacturers mentioned in the contract, failing which the bid shall be laible to be rejected. (c) Use of Scaffolding, trestles, ladders, cradles etc necessary for execution of work and protective measures. (d) Removing of Nails, making good holes, cracks etc. (e) Work in patches and in narrow/widths, bands, cornices, pilasters etc and cutting in edge of line where necessary. (f) Spreading and removing covering to doors, windows, floors, fittings etc to protect them from splashes. (g) Washing floors, cleaning glass, joinery, electric fitting, wiring etc Drops and splashes of paint to be cleaned to the entire satisfaction of Engineer-in-Charge. (h) Sample patch of 10 sqm be prepared considering all the items of periodical and shall be got approved from GE prior to carrying out further work. (j) The work shall be carried out up to 4th storey.(k) incl.removal of vegetation on walls incl roots on wall surfaces. |
| 63 | Notes :- Amount of Credit Schedule for Schedule 'A' Part-ll shall be deducted from total quoted amount of BOQ to arrive at the contract sum. Please Enable Macros to View BoQ information |
