|
| 1 | Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc (Not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, depth upto 1.5 mtr including disposal of excavated earth within 1km from cutting edge, disposed earth to be leveled and neatly dressed all kinds of soil |
| 2 | Ordinary rock |
| 3 | Earthwork in excavation by mechanical means over areas (exceeding 30cm in depth 1.5 mtr. in width as well as 10 sqm. plan) including disposal of excavated earth lead upto 1 km. and lift upto 1.5 mtr. disposed earth to be leveled and neatly dressed:In all kinds of soils |
| 4 | Ordinary rock |
| 5 | Filling available excavated earth excluding rock in trenches, plinth, sides of foundation etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming and watering lead up to 50m and lift up to 1.5m. |
| 6 | Dismantling GI pipes (external work) including excavation and refilling trenches after taking out the pipes, manually / by mechanical means incld. stacking of pipes within 50 mtrs lead:Above 40 mm nominal bore |
| 7 | 15 - 40 mm nominal bore |
| 8 | Dismantling C.I./D.I pipes manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 meter lead as per direction of Engineer in-charge.Upto 150 mm diameter. |
| 9 | Above 150 mm dia upto 300 mm dia. |
| 10 | Laying and fitting of GI pipes complete excld. cost of pipes and earthwork:100 mm dia GI pipes |
| 11 | 80 mm dia GI pipes |
| 12 | 65 mm dia GI pipes |
| 13 | 50 mm dia GI pipes |
| 14 | 40 mm dia GI pipes |
| 15 | 25 mm dia GI pipes |
| 16 | 20 mm dia GI pipes |
| 17 | 15 mm dia GI pipes |
| 18 | Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excld. cost of pipes) |
| 19 | Providing push – on – joints to centrifugally (spun) cast iron pipes or ductile iron pipes including testing of joints and including the cost of rubber gasket 100 mm dia pipes |
| 20 | 125 mm dia pipes |
| 21 | 150 mm dia pipes |
| 22 | Providing and fixing of Electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s switch boards, ceiling roses reputed make ISI mark screws, casing / conduit materials of allsorts of carriage and labour charges required for the job. Lighting points |
| 23 | Heating points |
| 24 | Supply of pipe specials of approved brand from open market, if not available in the Divisional stores (available supplies if any has to be lifted from the Divisional stores).80 mm dia G.I Union |
| 25 | 65 mm dia G.I. Union |
| 26 | 50 mm dia G.I. Union |
| 27 | 40 mm dia G.I. Union |
| 28 | 25 mm dia G.I. Union |
| 29 | 20 mm dia G.I. Union |
| 30 | 15 mm dia G.I. Union |
| 31 | 80 mm dia G.I. Elbow |
| 32 | 65 mm dia G.I. Elbow |
| 33 | 50 mm dia G.I. Elbow |
| 34 | 40 mm dia G.I. Elbow |
| 35 | 25 mm dia G.I. Elbow |
| 36 | 20 mm dia G.I. Elbow |
| 37 | 15 mm dia G.I. Elbow |
| 38 | 80 mm dia G.I. Socket |
| 39 | 65 mm dia G.I. Socket |
| 40 | 50 mm dia G.I. Socket |
| 41 | 40 mm dia G.I. Socket |
| 42 | 25 mm dia G.I. Socket |
| 43 | 20 mm dia G.I. Socket |
| 44 | 15 mm dia G.I. Socket |
| 45 | 25 mm dia G.I. Equal Tee |
| 46 | 40 mm dia G.I. Equal Tee |
| 47 | 50 mm dia G.I. Equal Tee |
| 48 | 65 mm dia G.I. Equal Tee |
| 49 | 80 mm dia G.I. Equal Tee |
| 50 | 25x25x20 mm dia G.I. Tee |
| 51 | 40x40x25 mm dia G.I. Tee |
| 52 | 50x50x40 mm dia G.I. Tee |
| 53 | 65x65x50 mm dia G.I. Tee |
| 54 | 80x80x65 mm dia G.I. Tee |
| 55 | 20x15 mm dia Socket/ Reducer |
| 56 | 25x20 mm dia Socket/ Reducer |
| 57 | 40x25 mm dia Socket/ Reducer |
| 58 | 50x40 mm dia Socket/ Reducer |
| 59 | 65x50 mm dia Socket/ Reducer |
| 60 | 80x65 mm dia Socket/ Reducer |
| 61 | 20x15 mm dia Elbow/ Reducer |
| 62 | 25x20 mm dia Elbow/ Reducer |
| 63 | 40x25 mm dia Elbow/ Reducer |
| 64 | 50x40 mm dia Elbow/ Reducer |
| 65 | 65x50 mm dia Elbow/ Reducer |
| 66 | 80x65 mm dia Elbow/ Reducer |
| 67 | Supply of Kerosene |
| 68 | Making connection of GI distribution branch with GI main of following sizes, by P/F of tees, incld. cutting and threading the pipe etc. complete25 to 40 mm dia nominal bore |
| 69 | Above 40 mm nominal bore |
| 70 | Re-threading of damaged pipe ends including carriage from site to workshop and back to site 15 mm dia |
| 71 | 20 mm dia |
| 72 | 25 mm dia |
| 73 | 40 mm dia |
| 74 | 50 mm dia |
| 75 | 65 mm dia |
| 76 | 80 mm dia |
| 77 | Hire charges of vehicle alongwith comercial driver licensed.( pick up Van/Sumo/Tractor) etcupto 60 Km per day |
| 78 | upto 120 Km per day |
| 79 | Repairs of electrification including replacement of wornout fittings |
| 80 | Desilting of various structures Viz SR's, Collection Chambers etc incld. Disposal of desilted material from site premises with all carriages lead & lifts etc. The job also includes, washing and cleaning of walls, beds, drains and floor etc with bleaching powder solution complete job. |
| 81 | Demolishing stone rubble masonry manually/ by mechanical means incld. stacking of serviceable material and disposal of unserviceable material within 50 mtr. lead: In cement mortar. |
| 82 | Demolishing of cement concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of materials within 50 m lead. |
| 83 | Providing & laying in position cement concrete of specified grade excld. cost of centring & shuttering – All work upto plinth level; 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 20 mm nominal size) Crushed |
| 84 | Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring and shuttering, finishing and reinforcement – All work upto plinth level: 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg. 20 mm nominal size) |
| 85 | Providing and laying in position cement concrete of specified grade excld. cost of centring and shuttering – All work upto plinth level: 1:3:6 (1 cement : 3 coarse sand: 6 graded stone agg. 40 mm nominal size) Crushed |
| 86 | Reinforced cement concrete work in walls (any thickness) incld. attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto floor five level excld. cost of centring, shuttering, finishing and reinforcement: 1:1.5 :3 (1 cement : 1.5 coarse sand: 3 graded crushed stone agg. 20 mm nominal size) |
| 87 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 150, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excld. the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement: 2 coarse sand: 4 graded stone agg. 20 mm nominal size).Crushed |
| 88 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or laces, courses, parapets, coping, bed blocks, anchor blocks, plain window sills, sunken floors fillets etc. upto floor five level, excluding cost of centring, shuttering and finishing. 1:2:4 (1 cement : 2 coarse sand: 4 graded stone agg. 20 mm nominal size) Crushed |
| 89 | Cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 thick with 20 mm nominal size stone agg. (Crushed) |
| 90 | Providing and fixing of G.I. Gate valves/D.I/C.I Sluice valve including cost of nuts, bolts, rubber insulations all carriages upto site of works, complete including returning back of damaged sluice valves, gate valves back to divisional stores complete100 mm dia Gate valve of ISI mark approved brand |
| 91 | 80 mm dia Gate valve |
| 92 | 65 mm dia Gate valve |
| 93 | 50 mm dia Gate valve |
| 94 | 40 mm dia Gate valve |
| 95 | 25 mm dia Gate valve |
| 96 | 20 mm dia Gate valve |
| 97 | 15 mm dia Gate valve |
| 98 | 150 mm dia Sluice valve (Kirlosker/ Shiv Durga) |
| 99 | 100 mm dia Sluice valve (Kirlosker/ Shiv Durga) |
| 100 | 80 mm dia Sluice valve (Kirlosker/ Shiv Durga) |
| 101 | Fixing of G.I. Gate valves/D.I/C.I Sluice valve including cost of nuts, bolts, rubber insulations all carriages upto site of works, complete including returning back of damaged sluice valves, gate valves back to divisional stores complete100 mm dia Gate valve |
| 102 | 80 mm dia Gate valve |
| 103 | 65 mm dia Gate valve |
| 104 | 50 mm dia Gate valve |
| 105 | 40 mm dia Gate valve |
| 106 | 25 mm dia Gate valve |
| 107 | 20 mm dia Gate valve |
| 108 | 15 mm dia Gate valve |
| 109 | 200 mm dia Sluice valve |
| 110 | 150 mm dia Sluice valve |
| 111 | 100 mm dia Sluice valve |
| 112 | 80 mm dia Sluice valve |
| 113 | Supply of various items including carriageBlue Lamps |
| 114 | Torch of standard quality with 3 Batteries |
| 115 | Black Polyethene film 250 Micron thickness |
| 116 | Pipe Wrench 14\\" (Taparia) |
| 117 | Pipe Wrench 18\\" (Taparia) |
| 118 | Pipe Wrench 24\\" (Taparia) |
| 119 | Pipe Wrench 36\\" (Taparia) |
| 120 | Pipe Wrench 48\\" (Taparia) |
| 121 | Hexa frame |
| 122 | Hexa blade |
| 123 | Carriage of material from divisional store up to dumping site of work, including loading, unloading and stacking etc. complete by Mechanical Transport Cement & steel, G.I/C.I pipe avg. lead upto 5 Kms |
| 124 | Cement & steel, G.I/C.I pipe avg. lead from 5 to 10 Kms |
| 125 | Cement & steel, G.I/C.I pipe avg. lead from 5 to 15 Kms |
| 126 | Sand & Agg. 20 mm avg. lead of upto 5 Kms |
| 127 | Sand & Agg. 20 mm avg. lead from 6 to 10 Kms |
| 128 | Sand & Agg. 20 mm avg. lead from5 to 15 Kms |
| 129 | 40 mm Agg. avg. lead of upto 5 Kms |
| 130 | 40 mm Agg. avg. lead from 6 to 10 Kms |
| 131 | 40 mm Agg. avg. lead from 5 to 15 Kms |
| 132 | Stone soiling avg. lead from 5 Kms |
| 133 | Stone soiling avg. lead from 5 to 10 Kms |
| 134 | Stone soiling avg. lead from 5 to 15 Kms |
| 135 | Carriage of material from dumping site to actual site of work, including loading, unloading and stacking etc. complete by manual labour Cement for an avg. lead of 50 to 250 mtr. |
| 136 | Cement for an avg. lead of 300 to 500 mtr. |
| 137 | Cement for an avg. lead of 550 to 750 mtr. |
| 138 | Cement for an avg. lead of 800 to 1000 mtr. |
| 139 | Cement for an avg. lead of 1050 to 1250 mtr. |
| 140 | Cement for an avg. lead of 1300 to 1500 mtr. |
| 141 | Steel for an avg. lead of 50 to 250 mtr. |
| 142 | Steel for an avg. lead of 300 to 500 mtr. |
| 143 | Steel for an avg. lead of 550 to 750 mtr. |
| 144 | Steel for an avg. lead of 800 to 1000 mtr. |
| 145 | Steel for an avg. lead of 1050 to 1250 mtr. |
| 146 | Steel for an avg. lead of 1300 to 1500 mtr. |
| 147 | Pipe for an avg. lead of 50 to 250 mtr. |
| 148 | Pipe for an avg. lead of 300 to 500 mtr. |
| 149 | Pipe for an avg. lead of 550 to 750 mtr. |
| 150 | Pipe for an avg. lead of 800 to 1000 mtr. |
| 151 | Pipe for an avg. lead of 1050 to 1250 mtr. |
| 152 | Pipe for an avg. lead of 1300 to 1500 mtr. |
| 153 | Soiling for an avg. lead of 50 to 250 mtr. |
| 154 | Soiling for an avg. lead of 300 to 500 mtr. |
| 155 | Soiling for an avg. lead of 550 to 750 mtr. |
| 156 | Soiling for an avg. lead of 800 to 1000 mtr. |
| 157 | Soiling for an avg. lead of 1050 to 1250 mtr. |
| 158 | Soiling for an avg. lead of 1300 to 1500 mtr. |
| 159 | Sand & Agg.20mm for an avg. lead of 50 to 250 mtr. |
| 160 | Sand & Agg.20mm for an avg. lead of 300 to 500 mtr. |
| 161 | Sand & Agg.20mm for an avg. lead of 550 to 750 mtr. |
| 162 | Sand & Agg.20mm for an avg. lead of 800 to 1000 mtr. |
| 163 | Sand & Agg.20mm for an avg. lead of 1050 to 1250 mtr. |
| 164 | Sand & Agg.20mm for an avg. lead of 1300 to 1500 mtr. |
| 165 | 40mm Agg. for an avg. lead of 50 to 250 mtr. |
| 166 | 40mm Agg. for an avg. lead of 300 to 500 mtr. |
| 167 | 40mm Agg. for an avg. lead of 550 to 750 mtr. |
| 168 | 40mm Agg. for an avg. lead of 800 to 1000 mtr. |
| 169 | 40mm Agg. for an avg. lead of 1050 to 1250 mtr. |
| 170 | 40mm Agg. for an avg. lead of 1300 to 1500 mtr. |
| 171 | Centering and shuttering including strutting, propping etc and removal of form work for:Foundations, footings, basis of columns etc. |
| 172 | Walls (any thickness) incld. attached pilasters, buttresses, plinth and string courses etc. |
| 173 | Columns, pillar, piers, posts and struts. |
| 174 | Suspended floors, roofs, landings, balconies and access platform. |
| 175 | Lintels, beams, plinth beams, cantilevers, etc. |
| 176 | Stairs, (excld. landings) except spiral staircases. |
| 177 | Clearing snow avalanche mixed with frost and compressed snow, including all types of equipments and safety to the workers while clearing the avalanches at head site |
| 178 | Supply of fire wood / rejection wood incld. all carriages upto site of work, complete |
| 179 | Random Rubble masonry with hard stone from quarry in foundation and plinth inclkuding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with: Cement mortor 1:6 (1 Cement : 6 Coarse Sand) |
| 180 | Dry random rubble masonry with hard stone in foundation and plinth : Using nallah stone without bond stone |
| 181 | Providing / fixing of M.S. step collars from 100 mm to 300 mm dia including earthwork excavation, refilling, dewatering etc. including all sorts of carriages, complete |
| 182 | Cutting road and making good the same including supply of extra quantities of material i.e. aggregate, moorum screening, red bajri and labour required. Water bound macadamQuarry. |
| 183 | Nallah. |
| 184 | Supply of unskilled labours |
| 185 | Supply of skilled labour |
| 186 | Supply of rubber long boots, required during harsh winters for restoration of water supply schemes by concerned field staff (one pair each) |
| 187 | Carriage of chemicals from div stores upto dumping site for an average lead of 05 kms upto 20 kms by mech transport |
| 188 | Carriage of chemicals from dumping site to actual site of work by manual labour for an avg lead of 500 mtrs |
| 189 | Hire charges of engaging JCB at site including carriage charges to and fro complete job |
| 190 | Welding charges at spots for GI pipes incl. shfiting of portable welding set upto site of work including C/o electrodoes charges of a sbilled welder testing incl. all carriages etc complete Please Enable Macros to View BoQ information |
