|
| 1 | Providing and fixing waterproof LED rope light (Warm White / Yellow), 6W per metre, IP65 rated, flexible strip type, approx. 400 lumens per metre with 72 LEDs per metre, suitable for indoor/outdoor decorative lighting, complete with transformer/power source, fixing clips, end-caps, installation and testing, of approved make such as Philips / Havells or equivalent, as per direction of Engineer-in-Charge. |
| 2 | Providing, fabrication and installation of English and Hindi letters for Welcome Gate made of Stainless Steel 304 Grade, 1.0 mm thick golden finished sheet, laser-cut to required fonts and sizes as approved by Engineer-in-Charge. The letters shall be fixed on MS frame/structure with necessary welding, drilling, screws, supports, spacers, and adhesives to ensure proper alignment and durability. The text to be displayed shall include in English and Hindi. All complete in all respects as per design, drawings, and directions of Engineer-in-Charge. Letters shall be from reputed make and finished to achieve uniform golden shine.” Payment shall be made on the basis of actual visible surface area (in Sq.ft/Sq.m) of stainless steel letters measured in finished position. The front visible surface area of each letter is measured.Example: A letter “A” of 0.600 Mtr. height × 0.45 Mtr. average width = then total area 0.270 sqm. |
| 3 | Providing and fixing 1.00 mm thick Stainless Steel 304 grade Golden Colour Sheet of approved make and shade, including necessary cutting, bending, curving, welding, grinding, polishing to mirror finish, edge moulding with SS beading/trim wherever required, fixing with stainless steel screws/adhesives/fasteners, complete in all respects including scaffolding, surface preparation and making good the damages etc. as per the direction of Engineer-in-Charge. |
| 4 | [13.29.2]Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 2. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works [Through Rate] |
| 5 | [13.30.1]Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 1. Hot finished welded type tubes [Through Rate] |
| 6 | [24.8.4]RCC FOUNDATIONS FOR OCTAGONAL POLES 4. Providing RCC foundation of M25 grade (1 Cement:1 Stone aggregate: 2 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @80 kg/cum of concrete contents, concrete cover 50mm, anchor bolts etc. over a bed of PCC 1:5:10 of required dimensions for octagonal poles of various heights as per following specifications complete in all respects and as per directions of Engineer-in-charge 6m high pole [Through Rate] |
| 7 | [8.32]ALUMINIUM COMPOSITE PANELS Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis and design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metallic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material and labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item , as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm up to two decimal places. [Through Rate] Please Enable Macros to View BoQ information |
