|
| 1 | LIMIT SWITCH 1NO + 1NC | LIMIT SWITCH 1NO + 1NC |
| 2 | 3 BOND COMPOUND (1 PKT = 10GMS) | 3 BOND COMPOUND (1 PKT = 10GMS) |
| 3 | O RING P-18 | O RING P-18 |
| 4 | O RING P-12 | O RING P-12 |
| 5 | SET OF CIRCLIPS, DOWE PIN, SPLIT PIN ETC | SET OF CIRCLIPS, DOWE PIN, SPLIT PIN ETC |
| 6 | DARINA GREASE (1 PKT = 250GMS) | DARINA GREASE (1 PKT = 250GMS) |
| 7 | TRIP HOLDING LATCH ASSEMBLY | TRIP HOLDING LATCH ASSEMBLY |
| 8 | TRIP COIL | TRIP COIL |
| 9 | CLOSING HOLDING LATCH ASSEMBLY | CLOSING HOLDING LATCH ASSEMBLY |
| 10 | CLOSE COIL | CLOSE COIL |
| 11 | CLOSING TRIGGER WITH BEARING | CLOSING TRIGGER WITH BEARING |
| 12 | TRIPPING TRIGGER WITH BEARING | TRIPPING TRIGGER WITH BEARING |
| 13 | SMALL PAWL WITH BUSH | SMALL PAWL WITH BUSH |
| 14 | BIG PAWL WITH BUSH | BIG PAWL WITH BUSH |
| 15 | ANTI-PUMPING LEVER | ANTI-PUMPING LEVER |
| 16 | GAS PRESSURE GAUGE | GAS PRESSURE GAUGE |
| 17 | ECCENTRIC SHAFT BEARING FRONT | ECCENTRIC SHAFT BEARING FRONT |
| 18 | ECCENTRIC SHAFT BEARING BACK | ECCENTRIC SHAFT BEARING BACK |
| 19 | THRUST BEARING FOR BLACK BOLT | THRUST BEARING FOR BLACK BOLT |
| 20 | THRUST WASHER (THIN) FOR BLACK BOLT | THRUST WASHER (THIN) FOR BLACK BOLT |
| 21 | THRUST WASHER (THICK) FOR BLACK BOLT | THRUST WASHER (THICK) FOR BLACK BOLT |
| 22 | CLOSING SPRING ROD BEARING | CLOSING SPRING ROD BEARING |
| 23 | CLOSING SPRING ROD BUSH | CLOSING SPRING ROD BUSH |
| 24 | BRASS WASHER FOR BLACK BOLT | BRASS WASHER FOR BLACK BOLT |
| 25 | CATCH SPRING | CATCH SPRING |
| 26 | TORSION SPRING LH | TORSION SPRING LH |
| 27 | TORSION SPRING RH | TORSION SPRING RH |
| 28 | EMERY PAD | EMERY PAD |
| 29 | SPRING CHARGING MOTOR | SPRING CHARGING MOTOR |
| 30 | RATCHET WHEEL ASSEMBLY | RATCHET WHEEL ASSEMBLY |
| 31 | SHOCK ABSORBER ASSEMBLY WITH TRIP SPRING | SHOCK ABSORBER ASSEMBLY WITH TRIP SPRING |
| 32 | CLOSING COIL ASSEMBLY | CLOSING COIL ASSEMBLY |
| 33 | TRIP COIL ASSEMBLY | TRIP COIL ASSEMBLY |
| 34 | HARDWARE SET | HARDWARE SET |
| 35 | ECCENTRIC SHAFT ASSEMBLY WITH PAWLS | ECCENTRIC SHAFT ASSEMBLY WITH PAWLS |
| 36 | SERVICE CHARGES TOWARDS DEPUTATION OF SERVICE ENGINEER FOR MECHANISM DRIVE OVERHAULING OF 245 KV CIRCUIT BREAKER (06 DAYS HAVE BEEN CONSIDERED FOR OVERHAULING OF TWO CB) | SERVICE CHARGES TOWARDS DEPUTATION OF SERVICE ENGINEER FOR MECHANISM DRIVE OVERHAULING OF 245 KV CIRCUIT BREAKER (06 DAYS HAVE BEEN CONSIDERED FOR OVERHAULING OF TWO CB) |
| 37 | TO-FRO CHARGES ON LUMP SUM BASIS PER VISIT | TO-FRO CHARGES ON LUMP SUM BASIS PER VISIT |
