|
| 1 | Providing,erecting and giving test of 150mm diameter submercible pumps set confirming to IS 8043 and IS 9283 pump shall be sutaible for various delivery head and discharge with stainless steel pumps shafts and bronze impellars. Motor suitable for working on 415 volts +10% 3 ph,50 hz AC supply. suplly cable guards, thrust carbon/ fiber bearing to accept entire hydraulic thrust, waterproof winding shall be provided. The pump sets shall be suitable for |
| 2 | Supplying and erecting, flat flexible submersible cable with, copper conducter, PVC insulated,and PVC sheathed 3 core x6 sqm |
| 3 | Providing erecting multi programmable automatic control unit suitable for submersible pump sets with test and trial with 2 years guarantee and also five visits for periodical maintenance during the guaranteed period. The control unit shall be suitable for programming independently for 2 shifts, shall incorporate running time compensation arrangement for loss of time due to power failure and shall have protections against under voltage over voltage, single phasing, wrong phase sequence and low water level with time delay to prevent nuisance tripping suitable for single pump set for single pump. |
| 4 | Excavation for foundation/pipe trenches in hard murum & boulder including excavated materials including normal dewtering etc complete. |
| 5 | Excavation for foundation / pipe trenches insoft rock by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete. |
| 6 | Excavation for foundation / pipe trenches in hard rock by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete. |
| 7 | DismantlingdeadpipelineofM.S./R.C.C./ C.I./P.S.C. andG.I./A.C./P.V.C./S.W./H.D.P.E.pipeincludingcostofnecessary excavation and refilling of trenches, breaking the joints, lifting thepipesand stacking to the place as directed by Engineer-in-chargewithall leadsand lifts including cleaning the surface, etc. complete.50 mm dia |
| 8 | Providing and supplying ISI mark GI pipe of following class and dia including all taxes,loading and unloading, octri,transportation including etc complete 80 mm dia GI Pipe B class |
| 9 | 50 mm dia GI pipe B class |
| 10 | 15 mm dia GI B class |
| 11 | Lowering and laying, jointing of ISI mark GI pipe of following class and dia including hydraulic testing etc complete.80 mm dia GI Pipe B class |
| 12 | 50 mm dia GI pipe B class |
| 13 | 15 mm dia GI B class |
| 14 | Hydraulic testing of G. I. pipe line to specified pressure including cost of all materials and labour and water for testing for the length upto 1km usingreciprocating type pumps which should be able to provide specified test pressure gauges and other necessary equipments, labour operation charges etc.required for testing, The rates under this item shall also include cost of retesting if necessary and reinstatingtooriginalpostion.80 mm dia GI Pipe B class |
| 15 | 50 mm dia GI pipe B class |
| 16 | 15 mm dia GI B class |
| 17 | Providing ISI mark CI double short body type manually operated sluice valve of following dia including all taxes ,loading and unloading ,transportation etc complete. 80 mm dia Sluice valve PN1 |
| 18 | 65 mm dia Sluice valve PN1 |
| 19 | 50mm dia Sluice valve PN1 |
| 20 | Lowering and laying ,jointing of MJP standard Sluice valve,NRV of following class and dia including testing etc complete. 80 mm dia Sluice valve PN1 |
| 21 | 65 mm dia Sluice valve PN1 |
| 22 | 50mm dia Sluice valve PN1 |
| 23 | Supply of CI Mechanical compression coller coupling sutaible for ci spun pipe and complete with sealing rubber gasket etc complete 65 mm dia |
| 24 | 80 mm dia |
| 25 | Providing and supplying Air Valves as per IS-14845-2000 and MJP’s standard specifications of approved make and quality offollowing diameters including railway freight,inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in allrespectetc.complete. |
| 26 | Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-chargeincluding cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete.(for all class of valves). |
| 27 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6mm thick M.S.pipeshaft2.70M long over branch flange of air valve tee, providingPCCblockofM-150concrete,150mm thick around theair valve tee including encasingof vertical shaft inPCCM-150as shown in typedesign togethe r with providing andmaking flanged jointswherever required and fixing of air valvetee,etc.completeasper type design and asdirectedbyEngineer-incharge for followingdiameters of pipe lines(typedesignattached.) |
| 28 | Providing and constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding,excludingexcavation,B.B.masonryinCM1:5proportion precast RCC frame and cover, etc. completeasdirectedbyEngineer-in-charge.As above of 90 x 90 cm internal size and depth upto1.2MwithprecastR.C.Cslabcover. |
| 29 | Providing and supplying C.I. detachable joints suitable for A. C. pressure pipes manufacturedasper IS-1538-1993standardsof followingcalassanddiameter includingcost of insurance, railway freight, inspection charges,unloding fromrailwaywagon, loding into truck,transporting to departmental store, unloading, stacking and cost of rubber rings, nut bolts. excludingGST leviedbyGOI &GOM in all respectetc.complete(IS-1538-1993) |
| 30 | Supplyof C. I.Mechanical Compression Flanged / Socket Tailpiece (Popularlyknownas I TMFlanged /Socket Tailpiece) suitable for making flanged connection with the plain barrel of C. I.SpunPipes (asper- IS-1536/2001)andD. I.Pipes(asper IS:8329 / 2000).TheTailpiec to be supplied complete with sealing rubber gaske to fS.B.R,C.I.FollowerGlandsandM.S.NutBolts.The whole assembly should be mechanically and hydraulically tested t the provisions as laid down in IS:1538/1993.Theratesare inclusive of cost of material, freight charges, loading, transportation and unloadingatdepartementalstore,excludingGST |
| 31 | Providing and supplying GI special in position with necessary materials etc complete,50 mm.65mm,75 mm dia bend,tees,union,coupler,elbows |
| 32 | Providing and laying in situ following grades of C.C.of trap/granite/gneiss metal for foundations and bedding including dewatering, formwork, compacting and curing, finishing, etc complete |
| 33 | Providing and fixing on wall/ceiling/floor 15 mm dia CPVC pipe with necessary fitting,remaking good the demoshied portion etc complete.including removing existing pipe line if necessary and convryaing and stacking the same in PWD chouky or as directed etc complete. |
| 34 | Providing and fixing 15 mm dia.concussion push button type brass/gun metal self closing tap including necessary socket complete. |
| 35 | Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging … etc complete. |
| 36 | Providing and fixing 6.00mm thick ISI mark Asbestos Cement Corrugated sheet roofing including galvanised iron 'J' or 'L' hook bolts galvanised iron bnd bituminous G.I. washers, galvanised iron clamps, bolts, nuts and scaffolding etc. complete. |
| 37 | Providing structural steel work and UCR works in single stanchions composed of RSJ, channel, etc with caps,bases, mild steel plates,angles,brackets,cleats, gussets plates,anchor bolts etc as per detailed design and drawing or as directed by engineer in charge including cutting,fabrication,hoisting,errecting fixing in position, making riveted/ bolted/welded/ connections and one coated of anticorrosive paints and over it two coats of oil painting etc complete. |
| 38 | Dismantling the existing submersible pump with GI pipeline up to 10m depth. (For additional depth of each 3 m or part thereof add Rs.50/- per 3 m, inthe rates) |
| 39 | Rewinding of submersible pump motor in Borewell of all types and makesup to and including 5 HP with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc.testing for the original speed, H.P. and no load consumption & guarantee for oneyear. |
| 40 | Replacing the existing nondriving end bearing of original make for electric motor A.C single phase / 3 phase 3 HP to 7.5 HP of all types withRequired alignment of the shaft and testing the same. |
| 41 | Supplying and replacing thermal overload relay for motor starter suitable for upto 12.5 HP. |
| 42 | Refitting existing submersible motor pump in borewell/oen well with pipe as directed in -charge including all labour charges etc complete |
| 43 | Desilting theSupplyWell, IntakeWell / Head Works, Sump of water supply / sewerageworksetc. in wet or dry condition includingliftsupto9Mandleadupto150 M as required beyond the work site, stacking, spreading, including necessary guarding, etc. complete, as directed by Engineer-in-charge. |
| 44 | Dewatering the excavated trenches and pools of water in the building trenches/pipeline trenches,well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel),etc.complete.(Bd-A9/261) Please Enable Macros to View BoQ information |
