|
| 1 | Excavation for foundation/pipe trenches in hard murum & boulder including excavated materials including normal dewtering etc complete. |
| 2 | Excavation for foundation / pipe trenches insoft rock by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete. |
| 3 | Excavation for foundation / pipe trenches in hard rock by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete. |
| 4 | DismantlingdeadpipelineofM.S./R.C.C./ C.I./P.S.C. andG.I./A.C./P.V.C./S.W./H.D.P.E.pipeincludingcostofnecessary excavation and refilling of trenches, breaking the joints, lifting thepipesand stacking to the place as directed by Engineer-in-chargewithall leadsand lifts including cleaning the surface, etc. complete.250 mm dia AC |
| 5 | Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointingmaterial like mechanical connector i. e. thread /insert joint / quick release coupler joint /compression fitting joint or flanged jointexcluding coupler/specials, includingtransportation and freight charges, inspectioncharges, loading / unloading charges,conveyance to the departmental stores &stacking the same in closed shade dulyprotecting from sunrays & rains, excluding GSTlevied by GI & GOM in all respect etc. complete, 250 mm dia 12.5 kg/cm HDPE |
| 6 | Lowering, Laying and Jointing H. D. P. E./M.D. P. E. pipes in proper position including allspecials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent ISCode complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II 250 mm dia 12.5 kg/cm HDPE |
| 7 | Hydraulic testing of H. D. P. E./ M. D. P. E. pipe line to specified pressure including cost of all materials and labour and water for testing for specified length including cutting, placing end cap making arrangement for filling safe water using reciprocating type pumps which should be able toprovide specified test pressure gauges and othernecessary equipments, labour, operation charges,etc. required for testing. The rate under this itemshall also include cost of retesting, if necessaryandreinstatingtooriginalposition..250 mm dia 12.5 kg/cm HDPE |
| 8 | Providing D.I. pipes (push on joints pressure pipes of D. I. of following class and diameters confirming to the I. S. specification inclusive cost of jointing materials (Rubber gasket of EPDM Quality ) excluding GST levied by GOI & GOM inall respect including Third party inspection charges of TPI Agency approved by MJP including Transit insurance, Railway Freight, Unloading from railway wagon, Loading into Truck, Transportation to departmental store, unloading, stacking etc. completed as directed by Engineer in charges (IS 1536/2001 for pipes andIS 158/1969 and IS 12820/1989 or latest edition/ revision with amendments for Rubber Gaskets. 250 mm dia DI pipe K-9 |
| 9 | Lowering laying and jointing with SBR ruber gaskets C.I. S/S pipes of various classes with CI / MS specials of following diameter in proper position, grade and alignment as directed by Engineer-in-charge including conveyance of material from stores to site of work, including cost of jointing materials and rubber ringslabouretc.complete.250 mm dia DI pipe K-9 |
| 10 | Hydraulic testing of C.I./D.I. pipe line to specified pressure including cost of all materials and labour andwater for testing for specified lengthincludingcutting,placingendcapmaking arrangement for filling safe water using reciprocating type pumps which should be able toprovidespecifiedtestpressuregaugesandother necessary equipments, labour, operation charges,etc. requiredfor testing.Therateunderthis itemshall also includecost of retesting, ifnecessary and reinstating to original positionusingwatersuppliedbythecontractor. |
| 11 | Providing and supplying ISI mark GI pipe of following class and dia including all taxes,loading and unloading, octri,transportation including etc complete 65 mm dia GI Pipe B class |
| 12 | 50 mm dia GI B class pipe |
| 13 | 25 mm dia GI B class pipe |
| 14 | 15 mm dia GI B class pipe |
| 15 | Lowering and laying, jointing of ISI mark GI pipe of following class and dia including hydraulic testing etc complete.65 mm dia GI Pipe b class |
| 16 | 50 mm dia GI B class pipe |
| 17 | 25 mm dia GI B class pipe |
| 18 | 15 mm dia GI B class pipe |
| 19 | Hydraulic testing of G. I. pipe line to specifiedpressure including cost of all materials and labourand water for testing for the length upto 1km usingreciprocating type pumps which should be able toprovide specified test pressure gauges and othernecessary equipments, labour operation charges etc.required for testing, The rates under this item shallalso include cost of retesting if necessary andreinstatingtooriginalpostion. |
| 20 | 50 mm dia GI B class pipe |
| 21 | 25 mm dia GI B class pipe |
| 22 | 15 mm dia GI B class pipe |
| 23 | Providing ISI mark CI double short body type manually operated sluice valve of following dia including all taxes ,loading and unloading ,transportation etc complete.250 mm dia Sluice valve PN 1 |
| 24 | 65 mm dia Sluice valve PN 1 |
| 25 | 50 mm dia Sluice valve PN 1 |
| 26 | Providing ISI mark CI double short body type manually operated Non return valve of following dia including all taxes ,loading and unloading ,transportation etc complete.250 mm dia NRV valve PN 1 |
| 27 | Lowering and laying ,jointing of MJP standard Sluice valve,NRV of following class and dia including testing etc complete.250 mm dia SluiceV valve PN 1 |
| 28 | 250 mm dia Non R valve PN 1 |
| 29 | 65 mm dia Sluice valve PN 1 |
| 30 | 50 mm dia Sluice valve PN 1 |
| 31 | Supply of CI Mechanical compression coller coupling sutaible for ci spun pipe and complete with sealing rubber gasket etc complete, 250 mm dia |
| 32 | Providing and supplying D.I. fittings with ISI mark Mechanical joint confirming to tables12 to table31of IS9523/2000upto latest amendments includingcost ofSBR/EDPMgaskets, Nuts, Bolts, Washers and Ductile iron follower glands. Fittingsshouldbewith internallyOrdinaryportland cementmortor linedand externallymetallic zinc coating/zinc richpaintwith finishing layer of blackbitumen coating including transportationandexcludingall statutary dutiesandtaxessuchasGSTleviedbyGolandGoMinall respect etc. complete.250 mm dia |
| 33 | Providing and supplying Air Valves as per IS-14845-2000 and MJP’s standard specifications of approved make and quality offollowing diameters including railway freight,inspection charges, unloading from railway wagons, loading into truck, transportation upto departmental stores, unloding and stacking excluding GST levied by GOI & GOM in allrespectetc.complete., 50 mm dia single ball Air valve PN 1 |
| 34 | 65 mm dia double ball Air valve PN 1 |
| 35 | Lowering, laying and fixing in proper alignment and position all types of C.I. air valves as directed by Engineer-in-chargeincluding cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc. complete.(for all class of valves). |
| 36 | 65 mm dia double ball Air valve PN 1 |
| 37 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6mm thick M.S.pipeshaft2.70M long over branch flange of air valve tee, providingPCCblockofM-150concrete,150mm thick around theair valve tee including encasingof vertical shaft inPCCM-150as shown in typedesign togetherwithproviding andmaking flanged jointswherever required andfixingofairvalvetee,etc.completeasper typedesignandasdirectedbyEngineer-incharge for followingdiameters of pipe lines(typedesignattached.) 200- 400 mm dia |
| 38 | Providing and constructing B.B. masonry valvechamber with 15 cm thick 1:3:6 proportion PCCbedding,excludingexcavation,B.B.masonryinCM1:5proportion precast RCC frame and cover, etc.completeasdirectedbyEngineer-in-charge.As above of 90 x 90 cm internal size and depth upto1.2MwithprecastR.C.Cslabcover. |
| 39 | Providing and supplying C.I. detachable joints suitable for A. C. pressure pipes manufacturedasper IS-1538-1993standardsof followingcalassanddiameter includingcost of insurance, railway freight, inspection charges,unloding fromrailwaywagon, loding into truck,transporting to departmental store, unloading, stacking and cost of rubber rings, nut bolts. excludingGST leviedbyGOI &GOM in all respectetc.complete(IS-1538-1993) 200 mm dia |
| 40 | Supplyof C. I.Mechanical Compression Flanged / Socket Tailpiece (Popularlyknownas I TMFlanged /Socket Tailpiece)suitable for making flanged connection with the plain barrel of C. I.SpunPipes (asper- IS-1536/2001)andD. I.Pipes(asper IS:8329 / 2000).TheTailpiec to be supplied complete with sealingrubber gaske fS.B.R,C.I.FollowerGlandsandM.S.NutBolts.Thewhole assembly should be mechanically and hydraulically tested to the provisionsaslaiddowninIS:1538/1993.Theratesareinclusiveof cost of material, freight charges, loading, transportation and unloadingatdepartementalstore,excludingGST,250 mm dia |
| 41 | Supply of C. I.Mechanical JointDoubleSocket 900 (11/4’’) Bendsasdimensionallydescribed inTable-14of IS-13382/ 1992 complete with sealing rubber gasket of SBR (dimensionally describedinIS-12820/1989)withcast ironfollowerglandandmild steel nut bolts coated or otherwise protected fromrusting and suitableforC.I.pipes.,250 mm dia |
| 42 | Supply of CI Mechaincal joint Double Socket Reducersas described inTable-21of IS-13382/1992 completewithsealing rubbergasketofSBR(dimensionallydescribedinIS-12820/1989) with cast iron follower glandandmild steel nut bolts coatedor otherwiseprotectedfromrustingandsuitableforC.I.pipes. 250 x150 mm |
| 43 | Providing and supplying GI special in position with necessary materials etc complete,50 mm dia and 65 mm dia Bend union,tees,coupler,elbows(9826+10016) |
| 44 | Providing and laying in situ following grades of C.C.of trap/granite/gneiss metal for foundations and bedding including dewatering, formwork, compacting and curing, finishing, etc complete |
| 45 | Providing and fixing on wall/ceiling/floor 15 mm dia CPVC pipe with necessary fitting,remaking good the demoshied portion etc complete.including removing existing pipe line if necessary and convryaing and stacking the same in PWD chouky or as directed etc complete. |
| 46 | Providing and fixing 15 mm dia.concussion push button type brass/gun metal self closing tap including necessary socket complete. |
| 47 | Refilling the trenches from excavated stuff with soft material in 15 cm layers with all leads & lifts including consolidation surcharging … etc complete. |
| 48 | Providing, installing and giving satisfactory field testing of flanged ends Bulk water meter of following type and as mentioned below with FGI-250 cast iron body, class \\"B\\" conforming to IS : 2373, to read in metric system,alongwith manufacturer's test and guarantee certificate including cost of all materials and labour with ISI mark etccomplete.250 mm dia |
| 49 | Providing,and fixingC.I.Strainer for water meters including cost of all material and labour.of \\"T\\"(Basket)Type with flange dends and with stainless steel or brass meshwith openings of2.5.mm to 3 mm and suitable for operating pressure of 16 Kg./cm2 and test pressure of 24 Kg./cm2 ,250 mm dia |
| 50 | Dewatering the excavated trenches and pools of water in the building trenches/pipeline trenches,well works by using pumps and other devices including disposing off water to safe distance as directed by Engineer-in-charge (including cost of machinery, labour, fuel),etc.complete.(Bd-A9/261) Please Enable Macros to View BoQ information |
