|
| 1 | 3.00 BHP Submersible pumps Providing erecting and giving test of submersibleto confirmng to IS 8034 and motor confirmingto IS 9283 with waterproof winding pump shall be suitable for various head and discharge with stainless steel shaft . Motor suitable for working 415 V +/- 10 % 3 ph 5o Hz A C supply with cable guard etc complete -3.00 BHP Submersible pumps – 1No. |
| 2 | Supplying and erection G.I. Pipe of following dia. And class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbing with Sockets and necessary material etc. complete.65mm dia. G.I. Pipe (Heavy class) 630.00 + (127.00+10%) |
| 3 | Supplying and erection GI pipe of B- Class in position suction delivery for centrifugal pump, vacuum pump and drop pipe for submersible pipe. Plumbing with Sockets and necessary material etc. complete.50 mm dia G.I.Bend.(180.00 +2%) +(42.00+20%) |
| 4 | 50 mm dia G.I.Tee (254.00 +2% ) + (42.00 +20% ) |
| 5 | Supplying and erecting flat flexible 3 core 4.0 sq.mm PVC sheathed A) submersible type copper cable 3 Core – 2.50Sqmm. |
| 6 | B) Aluminium Conductor PVC armoured 4 core cable 4 sqmm |
| 7 | Providing & supplying & jointing ISI mark CIDF Reflux (NRV) Valve including, railway fright, inspection charges, unloading from railway wagon .Loading in to truck, transport to the departmental store / site of work, Unloading, stacking etc. complete 50 mm dia. Reflux valve PN-1 grade. |
| 8 | providing double flange sluice valve confirming for IS 14846 including worn gear arrangement asper pressuer , stainless steel50 mm dia. Sluice valve PN-1 grade |
| 9 | Lowering , Laying and Jointing in position following C.I.D/F Reflex valve and sluice valve |
| 10 | Providing,and supplying C.I. D/F angle type spring loaded pressure releif valves of approved makes and quality including inspection charges etc complete50 mm dia.pressure relief valve PN-1 grade |
| 11 | Lowering, laying and fixing in proper alignment and position all types of C.I. D/F angle type spring loaded pressure relief valves including cost of all material, labour, cost of conveyance from stores to site of work and giving satisfactory hydraulic testing, etc. complete. (For all |
| 12 | Supplying & erecting automatic control panel for 3 Ph, 415 volt, A.c. Submersible/centrifugal pump set upto 7.5 HP consisting of DOL starter having relay range 9-14 AMP,S.P.P., Combined ammeter/voltmeter, phase indicating lamp enclosed in CRCA powder coated Vibration proof enclosure with IP 54 protection. Control Panel should offer single phasing, phase reversal, phase imbalance etc |
| 13 | Supplying an erecting cast iron earthplate 60 X 60 X 0.6 cm. buried in specifically prepared earth pit( top edge of of plate 1.5 m. below ground level ) refilling with 30.00kg charcole and salt in alternate layers , necessary length of double earth strip connection to the plate with cadminium plate GI nutbolts 12 mm dia with bituminious compound connected to the nearest switchgear with end socket as per direction and duly tested by earth tester and recording the results supplying and erecting and erecting 19 mm dia vertical gi pipe 1.5 M long with funnel and mesh at top is included in the scope of work. Plate type electrod. |
| 14 | Supplying and erecting metal work in CRCA sheet including Iron work for cutting bending welding , treated with antitrust treatment and duly powder coated or painted withone coat of lead paint and 2 coat paint complete |
| 15 | Supplying and erecting marine plywood 12 mm thick for panel board |
| 16 | Providing & erecting 3 Pole MCCB upto 100A, 415V, with short circuit rating 25 kA (Ics=100% of Icu ), adjustable thermal (overload) setting and fixed magnetic setting with provided leads, provision for installation of shunt/ UV/ trip alarm contact and MCCB should have phase barriers both sides, in provided enclosure on iron /GI frame as per specification no. SW-SWR/MCCB ... upto 100 Amp |
| 17 | Point wiring for light/ fan/bell consealed type in min 20 mm PVC conduit with 1.5 sq.mm FR grade copper wires, modular type swich and socket, earthing required accessaries .etc complete. |
| 18 | Providing MSEB Charges |
| 19 | Excavation for foundation/ pipe trenches in earth, soils of all types, sand gravel and soft murum, including removing the excavated material upto a distance of 50 meters & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.A)Lift 0 to1.50m |
| 20 | Excavation for foundation/pipe trenches in hard murum and boulders, W.B.M. road including removing the excavated material upto a distance of 50 M beyond the area and lifts as below, stacking and spreading as directed by Engineer-in-charge, normal dewatering, preparing the bed for foundation and excluding back- filling, etc. complete.A)Lift 0 to1.50m |
| 21 | Excavation for foundation/ pipe trenches in soft rock and old cement and lime masonry foundation asphalt road including removing the excavated material upto a distance of 50 M beyond area and lifts as below, stacking as directed by Engineer-in-charges, normal dewatering, preparing the bed for foundation and excluding backfilling, etc. complete.A)Lift 0 to1.50m |
| 22 | Filling in plinth and floors murum bedding in trenches with approved murum from foundation 15 cm to 20 cm layers including watering and compaction complete. |
| 23 | Providing and supplying in standard lengths Polyethelene Pipes, confirming to IS 4984 /14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM in all respect etc. complete.63 mm Dia HDPE Pipe 10 Kg/sqcm |
| 24 | Lowering, Laying and Jointing H. D. P. E./ M. D. P. E. pipes in proper position including all specials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II90 mm Dia HDPE Pipe10Kg/sqcm |
| 25 | Providing and supplying Air valves as per IS-10845 and MJP’s standard specifications of approved mark and quality of following diameters including all taxes (Central and local), railway fright, inspection charges unloading from railway wagons, loading into truck, transportation upto departmental stores/ site, unloading and stacking etc. complete.15mm type pn-1 |
| 26 | Lowering, Laying and fixing in proper alignment and position all types of C.I. Air valves as directed by Engineer in-charge including cost of conveyance from stores to site of work, cost of all material and giving satisfactory hydraulic testing, etc complete |
| 27 | Providing and fixing in position air valve shaft including providing and fixing GI Medium Class or 6 mm thick M.S. pipe shaft 2.70 M long over branch flange of air valve tee, providing PCC block of M-150 concrete 150 mm thick around the air valve tee including encasing of vertical shaft in PCC M-150 as shown in type design together with providing and making flanged joints wherever required and fixing of air valve over the shaft excluding cost of air valve and branch flanged air valve tee. etc. complete as per type design and as directed by Engineer-in-charge for following diameters of pipe lines (type design attached.) |
| 28 | Providing and laying in situ Cement concrete in proporation .... of trap metal for foundation and bedding, including balling out water manually, formwork, compacting and curing etc. complete.P.C.C 1:2:4 ( M-15 ) |
| 29 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete |
| 30 | Structural Steel Frame Platfrom And HDPE Tank 5000 Ltr St. Ht. 6M Excavation for foundation / pipe trenches in earth soil of all types, sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 31 | Excavation for foundation / pipe trenches in hard murum and boulders including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 32 | Excavation for foundation / pipe trenches in soft rock by controlled blasting, including trimming & leveling the bed by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 33 | Providing and laying in situ CementConcrete M-15 of trap/ granite / quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, compaction, curing, etc. complete. (Cement 5.90 bags/cum)PCC M-15 |
| 34 | Providing and laying in situ Cement Concrete of trap/ granite / quartzite /gneiss metal for RCC work in foundation like raft, grillage, strip foundation and footing of RCC columns and steel stanchions including normal dewatering, form work, compaction, finishing and curing, etc. complete. (By weigh batching and mix design for M250 and M-300 only. Use of L&T, A.C.C., Ambuja, Birla Gold, Manikgad, Rajashree, etc. cement is permitted.) (Excluding M.S. or Tor reinforcement)a) For RCC M-250 grade for Foundation & Footing |
| 35 | Providing and fixing in position steel bar reinforcement of various diameters for RCC pipes, caps, footings, foundation, slabs, beams, columns, canopies, staircases. newels, chajjas, lintels, pardies, copings, fins, arches, etc. as per detailed designs, drawings and schedules; including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required, etc. complete. (including cost of binding wire) Tor Steel |
| 36 | Providing structural steel work in rolled sections like joists, channels, angles, tees, etc. as per detailed designs and drawings including fixing in position without connecting plates, braces, etc. and one coat of anticorrosive paint and over it two coats of oil painting, of approved quality and shade, etc. complete |
| 37 | Providing and fixing M.S. cchequerred plate flooring of 6 mm thickness on M.S.angles including welding, cutting and fabricating the plate to the required square or round shape, making holes in the plate, including providing and applying of anticorrosive paint, etc.complete as directed by Engineer-in-charge. |
| 38 | Providing & fixing in position of M.S.Ladder 0.50M wide consisting of 75 x 10 mm M.S.flats as strigers and 16mm dia. M.S.bars in double rowsas steps placed at 25cm c/c including cost of materials & labour involved, welding, ancharing and applying 3 coat of anti-corrosive paint, etc. complete as directed by Engineer-in-charge. etc complete. |
| 39 | Providing and fixing G.I. pipe railing having 1.0 M height consisting 50x50x6 mm thick M.S. angles as verticals at 1.5Mc/c and additional posts at every corner bends to curved shape with 2 rows of 25mm dia. G.I. pipes of medium class variety as horizontal and painting 3 coats of anticorrosive oil painting of approved colour quality and shade including cost of labour, transporting bends to curved shape, etc. complete. |
| 40 | Providing & fixing in position of sintex or equivalent high density polyethylene UV stabilised conforming to I.S.12701, water storage tank with necessary connection, testing & all required accessaries etc complete. |
| 41 | Providing ISI mark G.I. pipe of following class and dia. excluding GST levied by GOI & GOM in all respect, inspection charges, transportation to stores, etc. complete as per IS-1239/2004.65mm.(8.02kg./m) |
| 42 | Lowering, laying and jointing G. I. pipes and specials of following class and diameter including conveyance from stores to site of works, all labour, etc. complete either underground or in verticalposition, as directed by Engineer-in-charge. |
| 43 | Providing and supplying GI Pipe Specials such as Tee, bend,…etc 10 % of pipe cost |
| 44 | Providing and fixing corrugated galvanised iron sheets of 0.63 mm thick (24B.W.G.) for roofing without wind tiles including fastening with galvanised iron screws and bolts, lead and bitumen washers as per drawing etc. complete.( |
| 45 | Distribution SystemExcavation for foundation / pipe trenches in earth soil of all types, sand, gravel & soft murum including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M |
| 46 | Excavation for foundation / pipe trenches in hard murum and boulders including removing the excavated material upto a distance of 50 m & lifts as below, stacking & spreading as directed, normal dewatering, preparing the bed for foundation & excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 47 | Excavation for foundation / pipe trenches in soft rock by controlled blasting, including trimming & leveling the bed by chiselling where necessary & removing the excavated material & stacking it in measurable heaps within a distance of 50 m from the area & lifts as below, normal dewatering, excluding the backfilling etc complete.a) Lift 0 to 1.50 M. |
| 48 | Filling in plinth and floors / trenches murum bedding with approved murum from excavated materials from foundation in in 15 to 20 cm. layers including watering, compaction etc. complete. |
| 49 | Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 /14151 / 12786 /13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint /compression fitting joint or flanged joint excluding coupler/ specials, including transportation and freight charges, inspection charges, loading / unloading charges, conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays &rains, excluding GST levied by GI & GOM in all respect etc. complete.63 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 50 | Lowering , laying & jointing with HDPE/ G.I. pipes and specials of following class and dia. including conveyance from stores to site of work, all labour, giving satisfacyory hydraulic test , etc. complete either underground or in verticle position , H. D. P. E./ M.D.P.E. pipes in proper position including all specials by compression fitting/ electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by Engineer-In-Charge.63 mm dia. HDPE Pipe (8 kg/cm) PE-100 |
| 51 | Providing double flanges Sluice Valve conferming IS 2906/14846 Incl worn gear arrangement as per test pressure stainless steel spindle, cap,inl. All taxes transportation etc. complete50 mm dia. S.V.( PN-1) |
| 52 | Lowering & laying and jointing in position following CIDF/Refluxe valve,Butterfly valve and Sluice valve incl. cost of all labour jointing material incl. nuts bolts and giving satisfactory hydraulic tesing etc complete.65 mm dia. S.V. (PN-1) |
| 53 | Providing & constructing B.B. masonry valve chamber with 15 cm thick 1:3:6 proportion PCC bedding , B.B. masonry in C.M. 1:5 proportion, precast R.C.C. frame & cover etc. complete..As above of 60 x 45 cm internal size and depth upto0.9M with precast R.C.C. slab cover. |
| 54 | Providing and laying in situ Plain Cement concrete in proportion M-150 of trap metal for foundation & bedding, including out water manually, form work, capacity & caring etc…… complete... |
| 55 | Refilling the trenches with available excavated stuff with soft material first over pipeline and then hard material in 15 cm layers with all leads and lifts including consolidation, surcharging, etc. complete. |
| 56 | Providing and making UPVC/MDPE pipe consumer service connection on Distribution main by drilling hole with suitable means , including all labour , UPVC/MDPE Pipe of required length with or without Road crossing as described below, including cost of specials like Saddle/Clamp Saddle of suitable material, and diameter suitable for Distribution main, 15mm /20mm/ 25mmA) Household Connection without water meter (Comression Saddle+ISI Mark Ferrul)for HDPE & PVC pipe For MDPE/UPVC Pipe SerFor MDPE/UPVC Pipe Service Connection on Disribution main For 15 mm Service connection(With Road Crossing) For 15 mm Service connection |
| 57 | (Without Road Crossing) For 15 mm Service connection Please Enable Macros to View BoQ information |
