|
| 1 | Providing of following material of standard make / best quality (PVVNL approved GTP-DRG with type test) after inspection of competent committee at manufacturing site of the items with actual guarantee period for complete the work of HT line as per RESPO norms by the contractor at his own cost : - |
| 2 | ST Pole 11 Mtr. long. |
| 3 | PCC Pole 8.5 Mtr. long. |
| 4 | Stone Pad. |
| 5 | Concreating of Pole. |
| 6 | Earthing Complete for pole. |
| 7 | 11 KV 3Cx120 Sq.mm. XLPE Cable. |
| 8 | 11 KV Outdoor Termination kit for 3Cx120 Sq.mm. XLPE Cable. |
| 9 | G.I. Pipe 6\\" Dia |
| 10 | 06 Mtr long pieces of HDPE pipe 140mm Dia for road crossing. |
| 11 | MS Top channel size 100x50x2280/2400mm |
| 12 | MS Dropper channel size 100x50x2280/3200mm |
| 13 | Support MS Angle GI Pipe 75x75x6x2028 with clamp |
| 14 | Holding Clamp with nut & bolts |
| 15 | 11 KV V-type Cross Arm |
| 16 | F-Bracket with Bolt & Nuts |
| 17 | ACSR Rabbit Conductor. |
| 18 | 11 KV Polymeric Pin Insulator |
| 19 | 11 KV Pin with nut & bolt. |
| 20 | 11 KV Polymeric Disc fitting. |
| 21 | 11 KV Disc Insulator. |
| 22 | MS Guarding Angle. |
| 23 | GI Wire 6 SWG |
| 24 | GI Wire 10 SWG |
| 25 | Eye Bolt. |
| 26 | MS T-off channel size 100x50x1640mm |
| 27 | Danger Plate with clamp and nut & Bolts |
| 28 | Barbed Wire GI. |
| 29 | MS Angle for Cross Bracing size 65x65x6x2700mm |
| 30 | Stay Set Complete |
| 31 | Concreating of Stay. |
| 32 | PG Clamp with nut & bolts |
| 33 | 11 KV VCB O/G FDR CTR 200/100/5A, 350 MVA 1250A. |
| 34 | 11 KV VCB I/C FDR CTR 600/300/5A, 350 MVA 1250A. |
| 35 | 11 KV 3Cx300 Sq.mm. XLPE Cable. |
| 36 | 11 KV Outdoor Termination kit for 3Cx300 Sq.mm. XLPE Cable. |
| 37 | Plinth & Foundation for 11 KV VCB. |
| 38 | Sundary Items. |
| 39 | Cable RCC / Stone Route Marker yellow colour with proper marking. |
| 40 | Erection / Fixing of following material after proper inspection for complete the work of HT line as per RESPO norms by the contractor at his own cost : - |
| 41 | Stone Pad. |
| 42 | Concreating of Pole. |
| 43 | 11 KV Outdoor Termination kit for 3Cx120 Sq.mm. XLPE Cable. |
| 44 | G.I. Pipe 6\\" Dia |
| 45 | MS Top channel size 100x50x2280/2400mm |
| 46 | MS Dropper channel size 100x50x2280/3200mm |
| 47 | Support MS Angle GI Pipe 75x75x6x2028 with clamp |
| 48 | Holding Clamp with nut & bolts |
| 49 | 11 KV V-type Cross Arm |
| 50 | F-Bracket with Bolt & Nuts |
| 51 | 11 KV Polymeric Pin Insulator |
| 52 | 11 KV Pin with nut & bolt. |
| 53 | 11 KV Polymeric Disc fitting. |
| 54 | 11 KV Disc Insulator. |
| 55 | MS Guarding Angle. |
| 56 | GI Wire 6 SWG |
| 57 | GI Wire 10 SWG |
| 58 | Eye Bolt. |
| 59 | MS T-off channel size 100x50x1640mm |
| 60 | Danger Plate with clamp and nut & Bolts |
| 61 | Barbed Wire GI. |
| 62 | MS Angle for Cross Bracing size 65x65x6x2700mm |
| 63 | Concreating of Stay. |
| 64 | PG Clamp with nut & bolts |
| 65 | 11 KV VCB O/G FDR CTR 200/100/5A, 350 MVA 1250A. |
| 66 | 11 KV VCB I/C FDR CTR 600/300/5A, 350 MVA 1250A. |
| 67 | 11 KV Outdoor Termination kit for 3Cx300 Sq.mm. XLPE Cable. |
| 68 | Plinth & Foundation for 11 KV VCB. |
| 69 | Sundary Items. |
| 70 | Cable RCC / Stone Route Marker yellow colour with proper marking. |
| 71 | CHEMICAL EARTHING WORK (SUPPLY AND INSTALLATION) AS PER FOLLOWING:-Note :- The all material and labour shall be provided by the contractor with 36 month guarantee for resistance value less than one OHM. |
| 72 | Providing of earthing electrode :-Material Description : GI Electrode, Galvanization : 150 Micron (Min),IS Standard : IS 3043 / IEEE - 837, Short Time Current Rating kA (rms) For 1 Sec : 42 KA For 1 Sec, Dia of Electrode : 50mm, Length of Electrode : 3000mm, Weight of Electrode : 15 Kgm, Pipe Thickness : 4mm or As per IS : 1239 4mm, Inside Filling Material : Crystalline Conductive Mixture, Inner Strip : 3100 X 50 X 6 mm,Terminal Hole Dia : 16 MM. Technology : Metal Thermal Spray (Joints) Protection Earthing Resistance Value in Different Soil Conditions with ERIC Backfill Compound : Normal Soil - Upto 2 Ohms, Sand. Muran Soil - Upto 4 Ohms, Rock Soil - Upto 4 Ohms,Electrode Testing Cetificate : CPRI Testd. Surrounding Filling Material (ERIC):- Product : ERIC (Earth Resitance Improvement Compound), IS Standard : IS 3043/IEEE 837, Chemical Composition : Graphite, Activated Carbon, Bentonite, ETC., Resistivity Value : >0.2 Ohm Per Meter, Melting Temperature : 2500 Degree Centigrade,Specific Gravity : 2.6, PH Value of Chemical : 7-9, Solubility in water : 3.54, Colour : Light cream/Ash, Main Caution ; Sodium, Moisture Capacity at 105 Degree : 10%, Weight of Chemical used / Earthing Pit : 50 Kg, Water Absorbing Capacity : 20 Times, Environmental Effects : Eco Friendly. Test Certifictae : ROHS Certified, Thermal Stability : Testsed, Corrosion Resistance : Tested, Swell Test Certificate : Yes, Ph Value Test Certificate : Yes. Installation Parameter :- Need Hole Dia : 6\\"-8\\" Need Hole Depth : 3 Meter,Guarantee : 36 Month. |
| 73 | Providing and fixing of GI strip of size 50 mm x 6 mm suitable for T/F. |
| 74 | Providing and fixing of PVC Pit covers for above earthing electrode terminals. |
| 75 | The Excavation of foundation pit in CC road/ mix soil/ normal soil/ soft & hard rack by using heavy duty compressor and its back filling and leveling etc. The size of the pit will be 600x600x1800 mm for each pole and having a depth of 1/6 of the full length of the support. |
| 76 | Erection of PCC pole 8.5 Mtr. including fitting of all reqired accessories of HT line as per RESPO schedule. |
| 77 | Erection of ST pole 11 Mtr. including fitting of all reqired accessories of HT line as per RESPO schedule. |
| 78 | Grouting of each pole (In ratio of 1:4:8 in Cement, sand and Brick Ballast) in size 450mmx450mmx1800 mm as per RESPO schedule Complete in all respects. |
| 79 | Plinth of each ST pole as per RESPO schedule Complete in all respects. |
| 80 | Grouting of stay rod 1800x16 mm & Fixing, Tighting & nozzling of stay wire 5 kg with the pole of required tension with clamps, bolt & nut. |
| 81 | Excavation of earth and driving of M.S. earthing rod of size 20x2500 mm in earth and jointing through G.I wire of 6 SWG between support and earth electrode by providing proper size of bolts and nuts etc. as per RESPO schedule Complete in all respects. |
| 82 | Laying, Lifting and final Binding, Sagging of ACSR Rabbit Conductor including fixing of all accessories as per RESPO schedule Complete in all respects. |
| 83 | Drilling of suitable dia 140 mm by trenchless method by horizontal boring machine at a depth of 1.5 mtrs below the ground level for road crossing / laying of 11 KV cable with Road Restoration in accordance with GPR Survey. Any damage to Road part from estimate shall be responsibility of contractor shall take NOC permission from concerned Authority & Restore as per their norms. |
| 84 | Laying and interconnecting of above 06 Mtr long pieces of HDPE pipe (140 mm Dia) (PVVNL approved) in trench for road crossing / laying of 11 KV cable complete in all respects.. |
| 85 | Digging of pits of size 4 mtr x 4 mtr x 1.5 mtr for cable loop. |
| 86 | Providing & Fixing of HDPE Socket suitable for HDPE pipe 140mm dia. |
| 87 | Tree prunning / cutting as per work site requirement. |
| 88 | Laying and pulling of 11 KV XLPE Cable (3Cx120 / 300 Sq.mm.) through HDPE pipe for road crossing complete in all respects. |
| 89 | Laying of 11 KV XLPE Cable 3Cx120 / 300 Sq.mm. in trench by open cut method with brick, sand & Tali, back filling complete in all respects as per RESPO norms for laying of 11 KV cable with Road Restoration in accordance with GPR Survey. Any damage to Road part from estimate shall be responsibility of contractor shall take NOC permission from concerned Authority & Restore as per their norms. |
| 90 | Laying of 11 KV XLPE Cable (3Cx120 / 300 Sq.mm.) in air / loop / riser as per work site requirement complete in all respects. |
| 91 | Hi port test for 11 KV XLPE Cable (3Cx120 Sq.mm. - 2280 Mtr. & 3Cx300 Sq.mm. - 120 Mtr.). |
| 92 | Hoisting of 11 KV XLPE cable on double pole structure through GI pipe 6 inch dia 3 mtr long fixed on pole structure including its jumpering complete with clamps, bolts and nuts. Please Enable Macros to View BoQ information |
