|
| 1 | Earthwork in excavation in foundation in ordinary soil including lift up to 1:5 meer( 5ft) and lead upto 30 m ( 100 ft) and including filling, watering & ramming of excavated earth into the trenches or into the space between the building and the sides of foundation treenches or into the plllnth and removal and disposal of surplus earth as direction by the Engineer- in- charge upto a distance of 30m(100ft) from the foundation trenches. SI No 252 |
| 2 | Concrete with 4 cm. gauge stone ballast fine sand of 1.25fm and cement in proportion of 1:4:8 in foundation and under floors with ass labour for completion of work SI No. 281 |
| 3 | R.C.C. work with cement approved coarse sand and 2 cm gauge approved stone ballast in the proportion of 1:1.5:3 in Slab excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B,W.G.G.I. binding wire and including necessary crentering & shuttering etc. and also including supply of all material labour and T&P etc. required for proper completion of the work. binding wire cost being included in the item. SI. No. 284(NS) |
| 4 | Mild steel or iron in plain work such as R.C.C. / R.B.(when not included in over all rates) wrought to requied sape as necessary including bending for proper completion of the work and including supply of steel , its wastage and hooks and authorised overlapping shall be masaured. SI. No. 504 |
| 5 | First class brick work in 1:6 cement and Coarse sand mortar in foundation plinth including supply of all materials, labour and T&P etc. required for proper completion of work. As per SOR 303(NS) |
| 6 | First class brick work in 1:6 cement and Coarse sand mortar in Superstructure plinth including supply of all materials, labour and T&P etc. required for proper completion of work. As per SOR 303(NS),308&309. |
| 7 | 12mm Cement plaster with cement mortar in proportion of 1:4 cement & coarse sand of single coat for interior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm in girth and finished even and smooth. |
| 8 | Providing and applying white cement based putty of average thickness 1 nimm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete As per DSR itern 13.80 |
| 9 | Wall painting with premium acrylic emulsion paint of interior grade, havingVOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brandand manufacture, including applyingadditional coats wherever required to achieveeven shade and colour. As Per DSR Item 13.83 |
| 10 | Providing and fixing in position collaspsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6mm, with 40mm dia steel pulleys, complete with bolts, nuts, looking arrangement, stoppers, handles, including applying a priming coat of approved steel primer As per DSR Item 10.30 |
| 11 | Light fitting including supply of all material T & P. |
| 12 | 2.50 cm thick 1:2:4 plain cement concrete floor with cement, aproved coare sand and 2 cm graded approved stone laid in panels finished with 3 mm flooring coat of neat cement or cement and marble dust in 5:1 as specified over & including 8 cm thick base concrete consisting of cement, local sand and brick ballast 4 cm gauge in the proportion of 1:4:8 and removing any over lappign mortar at the joints of panels if any and giving them a uniform finish including supply of all materials, labour and T&P etc. required for proper comletion of the work. as per item 601. |
| 13 | M.S. or iron work heavy sizes such as trusses, Builty up gates record rack roof work gates etc including rivetting or welding where necessary . wrought to required from including supply to steel bolt, nuts wastage etc and their fixing required for proper completion of the work. As per SOR Item 503. |
| 14 | Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.1.00 mm thick with zinc coating not less than 275 gm/m² |
| 15 | Site Clearance |
| 16 | GST 18% Please Enable Macros to View BoQ information |
