|
| 1 | Description of work |
| 2 | E/W in surface excavation not exeeding 30 cm in depth but exeeding 1.5 m in width as wel las10 sqm on plan including getting out and disposal of exavated earth upto 50 mtr and lift upto 1.5 mtr as directed by E/I all kinds of soil Chapter 4 SI 1 DSR/PWD spec.2.1.1 |
| 3 | Providing and laying in position in C.C. specified grade excluding the cost of centering, shuttering , finishing and reinforcement (1:4:8) with cement, Fine sand and 40mm gauge Brick ballast i/c all as per pwd specifications no 4.1.8 |
| 4 | Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 II. Brick masonry in 1:4 cement mortar Ref. to MORD spec 600 & 1200 |
| 5 | Plastering with cement mortar (1:4), 12 mm thick on brickwork in substructure as per technical specification Clauses 613.4 & 1204 600 |
| 6 | Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802,804,805,806,807,1202 and 1204 |
| 7 | WBM Grading 3 Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. (A) By Manual Means |
| 8 | Providing and Laying of Interlocking Concrete Block Pavements having thickness 80 mm as per drawings and Technical Specification Clause 1504. |
| 9 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 1km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. As per PWD schd Chaper 4 SI 5 DSR/PWD spec 2.25( a+c) |
| 10 | Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 R.C.C. grade M-25 |
| 11 | Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 Ref. to MORD spec.100 |
| 12 | Supply/Fixing of 2'6\\"X4'size granite stone for inauguration or information including all etc.complete AS per senction SE |
| 13 | Supply of Informatory M.S.sign board 1.20 x 0.90mt. Made of 18 gauge M.S. Sheet fixed in ISA 40x40x5 mm frame supported in back side by 40x5 mm flat iron on all four side along with two vertical post of 2.15 mt. From bottom of frame of angle iron ISA 40x40x5 mm with 150 mm long horizontal leg (hold fast) at bottom braced with 40x5 mm flat iron electrically welded and painted with one coat red oxide primor SI.No. 503 Please Enable Macros to View BoQ information |
