|
| 1 | Supply of C.I. Foot valve (Screw type) of 80 MM |
| 2 | Supply of starting handle for portable diesel engine pump set etc. complete as required. |
| 3 | Supply of Metal clamp with nut-bolt 75mm |
| 4 | Supply of following rating/ size CI Nipple for 75 MM |
| 5 | Supply of Agricultural cotton hose (heavy duty) in size:- (a) 75 MM |
| 6 | Supply of PVC Green suction hoses (heavy duty) W/P 7 Kgf/cm sq. in size:- 75 MM |
| 7 | Supply of Water suction and Discharge Rubber hose (heavy duty) W/P 7 Kgf/cm sq. Conforming to 3549/1983 in size:- 75 mm |
| 8 | Supply of Gland 8mm |
| 9 | Supply of Nut-Bolt set with washer, 4 soot - 4 Inch long |
| 10 | Supply of Nut-Bolt set with washer, 4 soot - 3 inch long |
| 11 | Supply of Rubber sheet 6mm thick |
| 12 | Supply of Coupling tyre 13 no. |
| 13 | Supply of Coupling plate set along with studs, size-13 no. |
| 14 | Supply of Coupling triangular set with belt, nut bolts, etc. |
| 15 | Supply of Rubber wheel with lock - pin 6 Inch |
| 16 | Supply of Stud 15 no. standard size |
| 17 | Supply of Stud 13 no. standard size |
| 18 | Supply of PVC garden pipe. Size: 25mm |
| 19 | Supply of Overload coil suitable for 40 HP oil immersed type starter |
| 20 | Supply of No volt coil suitable for 40 HP oil Immersed type starter, 440V |
| 21 | Supply of No volt coil Assembly suitable for 40 HP oil immersed type starter |
| 22 | Supply of Main Shaft suitable for 40 HP oil immersed type starter |
| 23 | Supply of Moving Drum suitable for 40 HP oil immersed type starter |
| 24 | Supply of Trip Rod Assembly suitable for 40 HP oil immersed type starter |
| 25 | Supply of Fixed Finger(h) suitable for 40 HP oil immersed type starter |
| 26 | Supply of Fixed Finger(b) suitable for 40 HP oil immersed type starter |
| 27 | Supply of Moving Tip Double suitable for 40 HP oil immersed type starter |
| 28 | Supply of Lock Leaver suitable for 40 HP oil immersed type starter |
| 29 | Supply of Overload coil suitable for 75 HP oil immersed type starter |
| 30 | Supply of No volt coil suitable for 75 HP oil immersed type starter, 440V |
| 31 | Supply of No volt coil Assembly y suitable for 75 HP oil immersed type starter |
| 32 | Supply of Main Shaft suitable for 75 HP oil immersed type starter |
| 33 | Supply of Moving Drum suitable for 75 HP oil immersed type starter |
| 34 | Supply of Trip Rod Assembly suitable for 75 HP oil immersed type starter |
| 35 | Supply of Fixed Finger(h) suitable for 75 HP oil immersed type starter |
| 36 | Supply of Fixed Finger(b) suitable for 75 HP oil immersed type starter |
| 37 | Supply of On load change over switch 630 mm Amp, Open execution type: 2 Nos. (one for DG set and 1 for phase sequece) |
| 38 | Supply of 4 pole MCCB, 200A, 36KA |
| 39 | Supply of 4 pole MCCB,250A, 36KA |
| 40 | Supply of 4 pole MCCB,400A, 50KA Please Enable Macros to View BoQ information |
