|
| 1 | Part -A |
| 2 | SITC of Powder Coated Double Door , free standing , Weather proof , Cubical type made of 16 SWG MS sheet , back closed Feeder Piller (Power Distribution panel) suitable for operation on 415V, 3 Phase ,50Hz AC supply ,consisting of following and as per specification attached I/c interconnection with suitable size Pvc insulated copper conductor cable .The Panel shall for suitable for Out door Installation with suitable shade to restrict entry of rain water i/c louvers on both sides to provide cross ventilation for air cooling and grouted the same in CC foundation with minor civil work etc as required. |
| 3 | INCOMING |
| 4 | (a) 250 A Rating 4 Pole MCCB with Breaking Capacity 36 KA , Ics=100% of Icu and thermal release range 200-250 A and Separator Terminals and 3 nos.LED indicating lamp set with individual MCB and wiring for phase indication complete as reqd. - 1 nos. Make (L&K formerly L&T/ Schneider Electric / Siemens) |
| 5 | OUTGOING |
| 6 | a) 100 Amp 4 pole MCCB ,Ics=100% Icu Breaking capacity 10KA at 415 V and Separator Terminals = 07 Nos. Make (L&K formerly L&T/ Schneider Electric / Siemens) |
| 7 | (b) 0-500 V 96 mm x 96 m Digital type flush mounted voltmeter with in built selector switch-1 Nos. |
| 8 | c) 4 strip 1.00 Mtr long 250 amp alu bus bar-1 Set |
| 9 | d)50 X 50 x 6 (mm) size Angle iron base frame 500 mm Height above floor (04 legs) suitable to house the panel - This base shall be grouted in the floor made of 1:2:4 C.C. (cement concrete Plat for structure to be prepared by the agency) |
| 10 | Note -1.Apoxx size of Panel is 1250mm(H) x1450mm(W) x300mm (D) .2 Panel should have suitable 16 SWG MS Sheet rain shed in all sides . |
| 11 | 2.Drawing for the panel shall be got approved from Engineer-in-charge before fabrication of panel. The panel shall be fabricated as per specification attached and shall be offered for inspection at factory before despatch to site. |
| 12 | 3.The ITC of panel shall be carried out as per ditection and as per convinence of Site In charge to ensure minimum interruption in AC power supply . |
| 13 | SITC of Powder Coated Double Door , free standing , Weather proof , Cubical type made of 16 SWG MS sheet , back closed Feeder Pillar (Power Distribution panel) suitable for operation on 415V, 3 Phase ,50Hz AC supply ,consisting of following and as per specification attached I/c interconnection with suitable size pvc insulated copper conductor cable .The Panel shall for suitable for Out door Installation with suitable shade to restrict entry of rain water i/c louvers on both sides to provide cross ventilation for air cooling and grouted the same in CC foundation with minor civil work etc as required . |
| 14 | INCOMING |
| 15 | (a) 400 A Rating 4 Pole MCCB with Breaking Capacity 36 KA , Ics=100% of Icu and thermal release range 320-400 A and Separator Terminals and 3 nos.LED indicating lamp set with individual MCB and wiring for phase indication complete as reqd. - 1 nos. Make (L&K formerly L&T/ Schneider Electric / Siemens) |
| 16 | OUTGOING |
| 17 | a) 250 Amp 4 pole MCCB ,Ics=100% Icu Breaking capacity 10KA at 415 V and thermal release range 200-250 A and Separator Terminals = 03 Nos. Make (L&K formerly L&T/ Schneider Electric / Siemens) |
| 18 | a) 125 Amp 4 pole MCCB ,Ics=100% Icu Breaking capacity 10KA at 415 V and Separator Terminals = 01 Nos. Make (L&T/ Schneider Electric / Siemens) |
| 19 | b) 100 Amp 4 pole MCCB ,Ics=100% Icu Breaking capacity 10KA at 415 V and Separator Terminals = 02 Nos. Make (L&K formerly L&T/ Schneider Electric / Siemens) |
| 20 | (c) 0-500 V 96 mm x 96 m Digital type flush mounted voltmeter with in built selector switch-2 Nos. |
| 21 | d) 4 strip 400 Amp Alu bus bar-1 Set |
| 22 | e)50 X 50 x 6 (mm) size Angle iron base frame 500 mm Height above floor (04 legs) suitable to house the panel - This base shall be grouted in the floor made of 1:2:4 C.C. (cement concrete Plate for structure to be prepared by the agency) |
| 23 | Note -1.Apoxx size of Panel is 1250mm(H) x1650mm(W) x300mm (D) .2 Panel should have suitable 16 SWG MS Sheet rain shed in all sides . |
| 24 | 2.Drawing for the panel shall be got approved from Engineer-in-charge before fabrication of panel. The panel shall be fabricated as per specification attached and shall be offered for inspection at factory before despatch to site. |
| 25 | 3.The ITC of panel shall be carried out as per detection and as per convenience of Site In charge to ensure minimum interruption in AC power supply . |
| 26 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 27 | Above 35 sq. mm and upto 95 sq. mm Meter |
| 28 | Above 95 sq. mm and upto 185 sq. mm |
| 29 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required |
| 30 | Above 35 sq. mm and upto 95 sq. mm Meter |
| 31 | Above 95 sq. mm and upto 185 sq. mm |
| 32 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required |
| 33 | Above 35 sq. mm and upto 95 sq. mm Meter (clamped with25x3mm MS flat clamp) |
| 34 | Above 95 sq. mm and upto 185 sq. mm (clamped with25/40x3mm MS flat clamp) |
| 35 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as . |
| 36 | 3 ½ X 95 sq. mm (38mm) |
| 37 | 3 ½ X 120 sq. mm (45mm) |
| 38 | 3 ½ X 185 sq. mm (57mm) |
| 39 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 40 | Transportation of appox 250 meter , 3 1/2 x120 sq mm PVC insulated PVC sheathed alu conductor armoured cable of 1.1 KV grade from TE Haldwani to Sanchar Vihar Colony Indra nagar Dehradun i/c loading at TE Haldwani and unloading at TE Dehradun etc complete as required. |
| 41 | Providing and fixing pre coated galvanised iron profile sheets of of 0.45mm thick of size 3.6 mtr x 1.05 mtr epoxy primer on both side of the sheet and polyester top coat 15-18 microns. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete including cutting to size and shape wherever required. |
| 42 | Providing steel Structural fabrication work bolted or welded in built up sections, and framed work, for Shed of Panel to protect from rain water made out of following sections i/c fixing in position and applying a priming coat including painting with synthetic enamel paint al least two coats all complete. |
| 43 | MS Square Pipe 40mm X 40mm X 1.6mm thick |
| 44 | MS Square Pipe 40mm X 75 mm X 1.6mm thick |
| 45 | MS Square Pipe 75mm X 75mm X 2 mm thick |
| 46 | Part B -Departmental Supply |
| 47 | Supplying 3 1/2 x120 sqmm Alu Conductor armoured cable of 1.1 Kv grade etc as reqd - 250 Mtr Please Enable Macros to View BoQ information |
