|
| 1 | Overhauling of the following ratings/models of diesel engine i/c dismantling of engine from base frame by cutting of nut bolts i/c loading/unloading by skilled labour, to & fro cartage, replacement of parts/accessories i/c piston, piston rings, lube oil filter, diesel filter, gear pump, nozzle, cylinder liner, axle, rubber wheels, connection pipe set, head repair and crank gringing i/c grinding, polishing etc., replacement of all packings complete in all respects, required body studs & nuts, mobil oil and minor repair works along with dynamic balancing with existing pump i/c installation, testing and commissioning on full load etc. as required complete in all respects. (Make: Kirloskar) (a) 6 BHP rating (Model no. TAF 1) |
| 2 | Servicing of the following ratings/models of diesel engine i/c replacment of following parts/ accessories (i) Oil filter,(ii) Diesel filter, (iii) Rubber wheels, (iv)Connection pipes,(v) Coupling Set,(v) Return pipe (vi) Nozzle set, (vii) Engine oil i/c replacement of all required packings complete in all respects, required body studs & nuts, and minor repair works along with dynamic balancing with existing pump i/c installation, testing and commissioning on full load etc. complete as required. (a) 6 BHP rating (Model no. TAF 1) |
| 3 | Repairing of the following dia/models of storm water pump i/c dismantling of pump set from base frame by cutting of nut bolts of suction side and delivery side and holding of delivery line by dead flange and thrust support and suction line by holding with tripod arrangement i/c loading/unloading by skilled fabour, to & fro cartage along with replacement of its parts/accessones i/c gland plate/spilt gland, MS Lock nut with Lock washer, Keys of impeller & coupling, stud of Gland plate and all packings i/c oiling, greasing replacement of required body studs & nuts, coupling tyre, required machining works for proper balancing of complete pump unit and minor repair works and dynamic balancing with existing motor i/c installation, testing and commissioning on full load etc. as required complete in all respects (Make: Kirloskar).Having suction of 150 mm (Model no. SHM 150/26) |
| 4 | Having suction of 200 mm (Model no. SHM 200/32) |
| 5 | Replacement of shaft of following dia/models of storm water pump etc. as required (Make: Kirloskar) Having suction of 150 mm (Model no. SHM 150/26) |
| 6 | Having suction of 200 mm (Model no. SHM 200/32) |
| 7 | Replacement of shaft sleeve of following dia/models of storm water pump etc. as required (Make: Kirloskar) Having suction of 150 mm (Model no. SHM 150/26) |
| 8 | Having suction of 200 mm (Model no. SHM 200/32) |
| 9 | Replacement of Impeller of following dia/models of storm water pump etc. as required (Make: Kirloskar) Having suction of 150 mm (Model no. SHM 150/26) |
| 10 | Having suction of 200 mm (Model no. SHM 200/32) |
| 11 | SITC of metal clad, powder coated, compartmentalized cubical panel board as per CPWD electrical specifications including insulated aluminum bus bars, supports, interconnection, erection of switchgears with depth 30 cm to 60 cm and making provisions for termination of incoming/outgoing cables/ bus ducting and making foundation etc as required. (Suitable for 400 Amp TP & N) |
| 12 | Providing and fixing following rating and breaking capacity andpole MCCB with thermomagnetic release and terminalspreaders in existing cubicle panel board including drilling holesin cubicle panel, making connections, etc. as required. 100 A, 16 KA,TPMCCB |
| 13 | 150 A, 16 KA,TPMCCB |
| 14 | 250 A, 35 KA,TPMCCB |
| 15 | Supply of On load change over switch 630 mm Amp, Open execution type: 2 Nos. (one for DG set and 1 for phase sequece) Please Enable Macros to View BoQ information |
