|
| 1 | Repairing of the following dia/models of storm water pump i/c dismantling of pump set from base frame by cutting of nut bolts of suction side and delivery side and holding of delivery line by dead flange and thrust support and suction line by holding with tripod arrangement i/c loading/unloading by skilled fabour, to & fro cartage along with replacement of its parts/accessones i/c gland plate/spilt gland, MS Lock nut with Lock washer, Keys of impeller & coupling, stud of Gland plate and all packings i/c oiling, greasing replacement of required body studs & nuts, coupling tyre, required machining works for proper balancing of complete pump unit and minor repair works and dynamic balancing with existing motor i/c installation, testing and commissioning on full load etc. as required complete in all respects (Make: Karloskar). Having suction of 100 mm (Model no. SHM 80/26) |
| 2 | Having suction of 150 mm (Model no. SHM 150/26) |
| 3 | Having suction of 200 mm (Model no. SHM 200/32) |
| 4 | Replacement of shaft of following dia/models of storm water pump etc. as required (Make: Kirloskar) Having suction of 100 mm (Model no. SHM 80/26) |
| 5 | Having suction of 150 mm (Model no. SHM 150/26) |
| 6 | Having suction of 200 mm (Model no. SHM 200/32) |
| 7 | Replacement of shaft sleeve of following dia/models of storm water pump etc. as required (Make: Kirloskar) Having suction of 100 mm (Model no. SHM 80/26) |
| 8 | Having suction of 150 mm (Model no. SHM 150/26) |
| 9 | Having suction of 200 mm (Model no. SHM 200/32) |
| 10 | Replacement of Impeller of following dia/models of storm water pump etc. as required (Make: Kirloskar) Having suction of 100 mm (Model no. SHM 80/26) |
| 11 | Having suction of 150 mm (Model no. SHM 150/26) |
| 12 | Having suction of 200 mm (Model no. SHM 200/32) |
| 13 | Replacement of bearing of following dia/models of storm water pump etc. as required (Make: Kirloskar) Having suction of 100 mm (Model no. SHM 80/26) |
| 14 | Having suction of 150 mm (Model no. SHM 150/26) |
| 15 | Having suction of 200 mm (Model no. SHM 200/32) |
| 16 | Repairing of following rating Electrical Motor by rewinding, varnishing including dismentaling of motor from pump by heavy labour i/c loading, unloading, to and fro cartage, complete with repairing of connection plate, fan, fan cover and required balancing, making connection, installation, testing & commissioning on full load etc. as required complete in all respects (old material will be retained by contractor) 5 HP |
| 17 | 15 HP |
| 18 | 25 HP |
| 19 | Replacement of bearing (support bearing) of following rating electrical Motor etc. as required. 5HP (SKF make bearing no. 63082ZVA201) |
| 20 | 15HP (SKF make bearing no. 63082ZVA208) |
| 21 | 25HP (SKF make bearing no. 63082ZVA208) |
| 22 | Replacement of bearing (load bearing) following rating electrical Motor i/c machining of shaft, hardchroming whereever required and polishing etc. as required complete in all respects. 5HP (SKF make bearing no. 63082ZVA201) |
| 23 | 15HP (SKF make bearing no. 63082ZVA208) |
| 24 | 25HP (SKF make bearing no. 63082ZVA208) |
| 25 | (A) P&F / Replacement of M.S. Black pipe (9.5 mm thickness) confirming to IS:3589 with required nut bolts & packing sheet etc complete as required. 450 mm dia (9.5 mm thick) |
| 26 | Providing and fixing of M.S. Flange with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 450 mm (25 mm thickness) |
| 27 | Providing and fixing of M.S. Blind Flange with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 450 mm (25 mm thickness) |
| 28 | Replacement of swing type Non Return Valve of CI Body with Door, bronze to Rubber rings confirming to IS 5312 (Part 1 & 2), PN 1.6 complete as required : (A) 80mm |
| 29 | (B) NRV 100 MM |
| 30 | (C) NRV 150 MM |
| 31 | (d) NRV 250 MM |
| 32 | Providing and fixing of M.S. Bend with required nut bolts & packing sheet etc. complete as required of following Dia. (a) 450 mm (10mm thick), length 0.75 m Please Enable Macros to View BoQ information |
