|
| 1 | PART-(A) Construction of 33 kv lineCarriage of Material-Safe Loading carriage including unloading & proper stacking of following store materials from from any store of MVVNL to site. (33/11 KV Sub-station Payagpur Distt-Bahraich) |
| 2 | STP 11.0 Mtr. Long |
| 3 | 33 KV Pin Insulattor(Polymeric) |
| 4 | MS earthing rod of 20x2500mm & 6 SWG earth Wire |
| 5 | M.S. TOP Channel 125x65x3200mm |
| 6 | Cost of ACSR Dog conductor (including sag charges, cutting and wastage) |
| 7 | 33KV 3x300sq.mm XLP Cable |
| 8 | 33 KV cable jointing kit suitable for 3x300sq.mm XLP Cable (O/D Type) |
| 9 | 33KV Cable Jointing Kit for 3x300 mm sqr cable Straight Through |
| 10 | Errection of Cable riser Double Pole support-The excavation of foundation pit of size (750x450) mm and having depth of 1/6 of the full length of the support. Errection of support, complete with providing & Fixing of all clamps and other accesories as per respo drawing. The work includes carriage and handling of supports from sectional store to pit site, fixing of Top Channel and cross bracing sets as well as any fabrication work if required. (Nuts & Bolts of different sizes, Top channel clamps, Bracing angle Clamp, E-Bracket, Disc fitting, bolt and nuts, stone pad as per norms etc shall be provided by Contractor.) |
| 11 | STP,SP 55 Round Pole 11 Mtr. Long |
| 12 | Concreting and plinthing of Poles-Grouting of supports in PCC 1:4:8 (cement, sand, & 20 mm size stone Grit). Grouting will be done in the block of size (450x450)mm x 1/6th of full length of support, upto ground level, 300mm plinth above the ground level with C.C 1:3:6 (Cement, Coarse sand and Stone grit of 20mm of size with muffing as per respo drawing). |
| 13 | STP,SP 55 Round Pole 11 Mtr. Long |
| 14 | Making jumpers on Section Points, by providing and fixing of P.G. Clamps of proper sizes, suitable for Dog Conductor |
| 15 | Sectional Double Pole structure |
| 16 | Laying of Cable |
| 17 | Laying of 33 KV 3x300 Sq.mm XLPE Cable In Double circuit in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine a sand, Ist class bricks, Inter axial spacing between the two cable should be in between 0.25 to 0.40m, the two cables should be separated by a partition of single bricks along the cable and stone's slab/brick on top of the each cable, including back filling of soil and proper ramming. |
| 18 | Laying of 33 KV 3x300 Sq.mm XLPE Cable by drill method in Double Circuit with the help of H.D.D. machine (Trenchless technology method by Deep Drilling System) with proper testing. |
| 19 | Installation of Heat Shrinkable Type cable jointing kits 3x300 mm.sqr. Cable |
| 20 | Straight through |
| 21 | End termination O/D kit |
| 22 | Hoisting of 33 KV Cable |
| 23 | Hoisting of 33 KV Cable on existing/erected support by MS Pipe 150 mm dia 3 mtr long suitable for 3x300 sq mm cable fixing of proper support and its clamping, jumpering properly as per RESSPO Norms. (MS pipe, supporting channel and clamps shall be provided by contractor). |
| 24 | Miscellaneous Work |
| 25 | Supply & fixing of danger board at each location. |
| 26 | Earthing of support with M.S. Earth rod of (20x2500 mm) long including excavation of pit and driving M.S. rod 0.5 mtr. Below the ground level and connecting the electrode with help of G.I. wire No 8 SWG and earthing lug. (G.I. Wire, bolt and nut and lugs shall be provided by the contractor.) |
| 27 | Wraping of barbed wire on 33 KV SP-72/SP-55 ST Poles as anti climbing device for a length of 0.9 Mtr. Wire pitch /Gap 33 mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. From the ground complete with providing and fixing of lower end & upper end clamps made of M.S Flat 40x5mm complete with nuts&bolts. (All the material will be supplied by the contractor). |
| 28 | Painting of following supports/structures with 2 coats of synthetic enamel Aluminium Paint after one coat of ready mix primer including cost of all material, as well as rubbing/cleaning of surface as required for proper completion of work. |
| 29 | Single Pole STP 11 mtr. Long. |
| 30 | Supply & installation of cable route marker with engraving, including excavation, PCC foundation, fixing, backfilling, and all materials, labor & consumables, complete. |
| 31 | High voltage (HV) testing of 33 kV, 3C x 300 sq.mm UG cable after laying & termination, including IR test, application of test voltage, and reporting, complete. |
| 32 | Stringging and Sagging of Conductor-Laying, Spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with Line chart including binding and fixing of all accessories in 03 Nos. Conductor in Parallel. |
| 33 | Dismantling of existing 33 KV UG/Overhead cable by careful excavation from ground, including removal from existing pole structure, and re-erection by lifting, dressing, and fixing on another pole with proper supports, clamps, and accessories, including all labour, tools & tackles, and restoration of site as required. Please Enable Macros to View BoQ information |
