|
| 1 | Part A (Materials Provided by contractor) |
| 2 | 1x16 mm² LT cable |
| 3 | Dead end clamp |
| 4 | F Bracket |
| 5 | 11 KV Polymer Pin Insulator |
| 6 | 11 KV X arm |
| 7 | Clamp for 11 KV X arm |
| 8 | Number Plate with Clamp |
| 9 | Danger Board with Clamp |
| 10 | Barbed wire |
| 11 | Bolts, Nuts, & Washers |
| 12 | LT Schakle Insulator |
| 13 | MS Earthing Complete |
| 14 | LT AB Cable clamp with nut & bolt |
| 15 | I Hook |
| 16 | J Hook |
| 17 | Suspension clamp |
| 18 | Neutral PRC |
| 19 | Al. Paint |
| 20 | Red oxide Paint |
| 21 | 11 KV Guarding angle |
| 22 | 11 KV Guarding Clamp |
| 23 | GI wire 6 SWG |
| 24 | GI wire 8 SWG |
| 25 | 11 KV Polymer Disc Insulator |
| 26 | 11 KV Polymer Disc fitting |
| 27 | PG clamp for Dog |
| 28 | 11 KV Stay Set Complete |
| 29 | MS channel T-off 125x65x1300 mm |
| 30 | Clamp for T off |
| 31 | Three Phase Distribution Box |
| 32 | Holding clamp for Distribution Box |
| 33 | PART - B- WORKShifting, Loading Carriage & Unloading of following materials from store centre Gorakhpur to work site |
| 34 | PCC Pole 8.5 Mtr. Long |
| 35 | ST Pole 11 m long |
| 36 | ACSR weasel Conductor |
| 37 | ACSR Dog Conductor |
| 38 | 3x120+1x95+1x16 mm² LT AB Cable |
| 39 | Erection of Single pole structure on 8.5 Mtr. PCC pole for LT AB Cable Single Circuit including all works of evocation of pit, pole erection grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (LT clamps with bolt and nut danger board with clamp, barbed wire, Installation of distribution Box, earthing, etc. complete). |
| 40 | Erection of Single pole structure on 8.5 Mtr. PCC pole for 11 KV Line including all works of evocation of pit, pole erection, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (11 KV Cross arm with clamp, bolt and nut danger board with clamp, Pin Insulator, barbed wire, earthing, etc. complete). |
| 41 | Erection of Single pole structure on 11 mtr ST Pole for 11 KV Line including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (11 KV X arm with clamps, Dropper angle danger board with clamp, Aluminium paint, red oxide paint, Pin Insulator barbed wire earthing, etc. complete) . |
| 42 | Guarding of 11 KV Line for Road/Line Crossing with all Fitting complete work. |
| 43 | Labour charges for Hanging of LT AB Cable on new erected pole with LT AB Cable clamp, complete. |
| 44 | Charges for making section and jumpering with related Weasel/Dog conductor as per site requirement. |
| 45 | Shifting, loading, Carriage and re-installation of Existing 10/16 KVA T/F From Existing place to Shifted Place with installation related all materials i.e. installation of fitting and equipment. as per site requirement and instruction of supervision authority. (Including earthing of Transformer Distribution Box with clamp) complete work. |
| 46 | Dismentling charges of existing PCC Pole 8.5 mtr. |
| 47 | Dismentaling of old ACSR Weasel conductor and rolling in pieces. |
| 48 | Dismentaling of old AB Cable and rolling in pieces. |
| 49 | Shifting, Loading, Carriage & Unloading of old and damaged 11 KV/LT Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur. Please Enable Macros to View BoQ information |
