|
| 1 | Excavating in trenches , n.exc 1.5 m wide and n.exc 1.5 m depth for foundation etc or for shafts, wells, cesspits ,manhole pier hole, laying of cables, pipes etc n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in any kind of soilNote : Manual excavation to be done. During excavation if any damage occured to existing cable any type/ water pipe line, it will be contractor responsibilty to get it repair and make functional by providing jointing kit etc without any extra cost. Contractor has to repair it within 24 hrs so that essential service can not be effected due to such damage.If contractor fails to repair it within 24 hrs penalty @ Rs 500/- will be charged to contractor. In this GE decision will be final, conclusive and binding. |
| 2 | Returning, filling in, including spreading, leveling, watering & well ramming in layers n. exc 25 cm thick complete all as directed. |
| 3 | Removal of excavated soil to a distance not exc 50 m and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as directed. |
| 4 | Taking up CI/DI water main (incl all fitting) with spigot & socket ends and lead joints incl burning out & recovering lead from pipe of 100 mm bore for relaying / rerouting of serviceable pipe after cleaning complete all as directed. |
| 5 | Supply, Laying, jointing & testing of Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329 and other relevant standards and metalic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining, 100 mm bore laid in trenchesNote:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 6 | Supply, Laying, jointing & testing of Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329 and other relevant standards and metalic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining, 150 mm bore laid in trenchesNote:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 7 | Supply, Laying, jointing & testing of Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329 and other relevant standards and metalic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining, 200 mm bore laid in trenchesNote:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 8 | Supply, Laying, jointing & testing of Ductile iron (DI), pressure pipes with spigot and socket ends, centrifugally cast, class K-7, with cement mortar lining in inner side as per IS:8329 and other relevant standards and metalic zinc coating followed by a finishing layer of epoxy paint in outer side, suitable for push on joint(rubber gasket joint) in any length with inside cement mortar lining, 250 mm bore laid in trenchesNote:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 9 | M&L DI bend any type, radius and angles, tappers and type (straight, bend, increasing, decreasing, or double socket etc. Tee pipes single branch Y junction, double branch cross (all socket, socket and Spigot or flanged ends) collors, caps and plugs for the Pipes socket and Spigot. All socket and flanged upto bore of 250 mm complete all as specified. |
| 10 | S&F in repairs CI sluice valve of size 250 mm bore with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged complete with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete all as specified :-Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 11 | S&F in repairs CI sluice valve of size 200 mm bore with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged complete with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete all as specified :-Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 12 | S&F in repairs CI sluice valve of size 150 mm bore with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged complete with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete all as specified :-Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 13 | S&F in repairs CI sluice valve of size 100 mm bore with stainless steel spindle and cast iron hand wheel complying with IS:14846-2000, class PN 1.6 both ends flanged complete with 2 Nos rubber insertion gasket joints, nuts, bolts & washers of required size & Nos complete all as specified :-Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 14 | Supply, fixing and testing CI Reflux/ Non Return valve single door pattern with flanged ends PN-1.0 confirming to IS: 5312, ISI marked of size 150 mm dia bore with bypass arrange ment including all fixing accessoriestype Cast iron flanged end with nuts, rubber gasket, bolts (full threaded), nuts & washers complete all as directed: Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 15 | Supply, fixing and testing CI Reflux/ Non Return valve single door pattern with flanged ends PN-1.0 confirming to IS: 5312, ISI marked of size 100 mm dia bore with bypass arrange ment including all fixing accessoriestype Cast iron flanged end with nuts, rubber gasket, bolts (full threaded), nuts & washers complete all as directed: Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 16 | Supply and fixing in repairs Butter fly valve 150mm bore confirming to IS-5312 Part-I, pressure rating PN1.6, Flange drilling as per IS-1538, CI valve body diaphragm, CI disc, Disc face ring -rubber, Aluminium hinge pin, CI hinge and bornze body ring complete including taking out existing UNSV valve all as directed. Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 17 | S&F in repairs 50 mm bore gate valve gum metal class-II screwed down high pressure with clutch handle screwed both ends for Iron pipe including taking out of old unserviceable gate valve complete all as directed. Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 18 | S&F in repairs 40 mm bore gate valve gum metal class-II screwed down high pressure with clutch handle screwed both ends for Iron pipe including taking out of old unserviceable gate valve complete all as directed. Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 19 | S&F in repairs 25 mm bore gate valve gum metal class-II screwed down high pressure with clutch handle screwed both ends for Iron pipe including taking out of old unserviceable gate valve complete all as directed. Note:(i) Contractor has to submit the test certificate and purchase voucher of pipes before claiming payment, to the Engr-in-Charge |
| 20 | Supply and laying PVC insulated and PVC sheathed industrial cable for Submersible pump motors of size 10 Sqmm flat three core copper conductor, 1100 Volts, Confirming to IS-694 complete all as specified and directed. |
| 21 | Supply and fixing in repairs ERW steel tubes column pipe 150 mm dia (ID) (3 mtr long) for water wells conforming to IS 4270-2001 , with flanged end (MS flanges screwed and welded on both ends), including MS nuts, bolts, gasket etc. Note : (i) The pipe shall be heavy duty MS pipe not less than 5.40 mm thick of wall .(ii) The flanges shall have 8 hole and grooves to accommodate the submersible cables and sling wires. Lath work required for drilling hole as per existing to be done by contractor without any extra cost.(iii) MS Flange thickness shall not be less than 8 mm. (iv) The length of pipe shall be of 3.0 mtr with MS flange screwed and welded at both the ends. |
| 22 | Opening completely pressure filter & oxidation chamber of capacity upto 10000 GPH and taking out existing filter media (sand, gravells) stainers and nozzles, removing and depositing filter media to a distance not exceeding 50 m including necessary repair/welding to make the pressure filter vessels complete leak proof for improving the strength and finally reassembling the pressure filter including filling of new strainer, gravles & sand in existing position duly cleaned replacing worn out gasket and nut bolts and washers, complete all as specified and as directed. Note- Strainers, gravels shall be measured and paid seperatley under relevant items. |
| 23 | Material and labour for prepration of old painted steel/iron surfaces of pressure filter chamber by scrapping and cleaning of external and internal surfaces and applying two coats of black bituminious anti corrosive paint internal surface suitable for drinking water and Navy blue paint on outer surface marking the date of cleaning on the body complete all as specified and directed. |
| 24 | Refixing of existing PVC strainer of IRP plant complete all as specified and as directed. |
| 25 | Supply only PVC push type/threaded type strainer suitable for filteration plant ,complete all as specified and as directed. |
| 26 | Supply only special coarse sand passing through 3.125 x 1.56 mm mesh suitable for use in filteration plant complete all as specified |
| 27 | Supply only special coarse sand passing through 1.6 x 3.2 mm mesh suitable for use in filteration plant complete all as specified |
| 28 | Supply only new washed, cleaned, dust free, gravel of grading 25 mm to 20 mm. graded filter media suitable for use in filteration plant complete all as directed |
| 29 | Supply only new washed, cleaned, dust free, gravel of grading 20 mm to 12 mm. graded filter media suitable for use in filteration plant complete all as directed. |
| 30 | Supply only new washed, cleaned, dust free, gravel of grading 12 mm to 06 mm. graded filter media suitable for use in filteration plant complete all as directed. |
| 31 | Supply only new washed, cleaned, dust free, gravel of grading 06 mm to 03 mm. graded filter media suitable for use in filteration plant complete all as directed. |
| 32 | Supply and fixing live catalytic media (green Sand) suitable for use in filltration plant complete all as specified and directed. |
| 33 | Supply only mix of manganese dioxide (MnO2) and treated carbofil in lumps of size 20 mm to 15 mm containing 75% of manganese Dioxide and 25% carbofil suitable for use in filltration plant complete all as specified and directed. |
| 34 | M & L for steel wire rope 12 mm galvanised IWRC as per IS alongwith suitable size clamps & 'U' bolts for holding the submersible pumps and motor of capcity uto 35 HP complete all as specified and directed. |
| 35 | M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundation of pillar complete all as directed. |
| 36 | M&L PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in coping on brick machinary on of pillar and like complete all as directed. |
| 37 | M&L for Mechanical joint for jointing of DI pipe of size 100mm including excavation at site all as specified and directed . |
| 38 | M&L for Mechanical joint for jointing of DI pipe of size 150mm including excavation at site all as specified and directed . |
| 39 | M&L brick work in cum (1:6) as brick pillar for testing of CI pipe line complete all as directed. |
| 40 | M&L 10 mm thick cement plaster in cum (1:6) on brick surface fair and even complete all as directed |
| 41 | M & L for Star delta starter for Pump motor set upto 40 Hp |
| 42 | M & L for Star delta starter for Pump motor set upto 25/30 Hp |
| 43 | M & L for Star delta starter for Pump motor set upto 20 Hp |
| 44 | M&L digital voltmeter 0-500V capacity as per existing after taking out old and unserviceable |
| 45 | M&L digital Ampmeter 96x96 size digital with CT ratio of 0-200 Amp as per existing after taking out old and unserviceable |
| 46 | Dismantling and taking out motor (15 to 25HP) burnout motor winding from the stator of motor and Rewinding with existing gauge PVC copper cable insulation material incl cleaning of slots, insulating papers etc.complete all as directed. Note : 1) Rate of Rewinding in included in qouted rate . 2) Rate is inclusive of lifting and lowering of pump set. |
| 47 | Supplying, lowering, fixing, commissioning and testing submersible pumping set with pump and motor in borewell electrically driven, 415 Volts, three phase,20Hp, AC, having a discharge capacity appx 55 Cum/Hour at a appx head of 70 meters, delivery/discharge dia 100 mm inclujding insertion of GI/ERW column pipe with other connected accessories and necessary electrical connections complete all as specified and directed. (Note- GI column pipe, pipe accessories and submersible cable shall be measured and paid seperately). |
| 48 | Supply and fix in replacement Heavy duty chemical dosing system plunger type suitable to inject solution upto 25 LPH working pressure 10Kg/cm2 comprising dosing pump coupled with three phase electric motor of capacity 0.5 HP,1440 rpm assembly with agitator in one motor ,agitator with SS sweep blade dult FRP coated,FRP tank 150 Ltrs capacity ,complete unit mounted on heavy duty MS fabricated frame duly anticorrosive paint complete with chemical grade PVC NRV , along with control panel for dosing pump power coated MS fabricated box consisting of Led indicator ,digital volt meter, amp meter ,single phase preventor,High voltage low voltage protector. |
| 49 | M&L for opening of sluice valves 150 to 250 mm dia bore after de-scaling and grinding on Lathe Machine and replacement of Spindle, Gutka, valve sheet, brass rings as per existing and complete scaling and proper functioning at site refixing at existing postion inclcluding nut, bolt, washer, gasket, wheel complete all as specified and as directed. |
| 50 | M&L for opening of sluice valves 100 mm dia bore after de-scaling and grinding on Lathe Machine and replacement of Spindle, Gutka, valve sheet, brass rings as per existing and complete scaling and proper functioning at site refixing at existing postion inclcluding nut, bolt, washer, gasket, wheel complete all as specified and as directed. |
| 51 | Repair to existing valve pit chamber of any size with the followings : - |
| 52 | M&L for brickwork with locally available best quality fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in cement mortar (1:4) complete all as specified. |
| 53 | M&L for Rendering 15 mm thick cement plaster in CM 1:4 on fair faces of brick/concrete surfaces finished fair and even, mixed wth water proofing compound admixture (if directed) as per manufacturer's instruction, complete all as specified and directed.Note :- WPC will measuered and paid separatly under relevant item of schedule. |
| 54 | M&L for PCC cement concrete in Type B1 1:2:4 (using 20 mm graded crushed stone aggregate) in lintels upto 1.5 m clear span, cills,steps and other similar bands, plinth courses,string courses and railings upto 60cm in height, copings, apex stones, kerbs and the like including weathering, slightly rounded or chamfered angles and throating as desired complete all as directed by the Engr-in-Charge. |
| 55 | S& F valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit |
| 56 | M&L for preparing of new steel & iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enameled paint over a coat of Red oxide zinc chrome primer zinc chrome complete all as specified and as directed. |
| 57 | M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 1200x1200x900 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc all as directed by Engr-in-Charge. |
| 58 | M&L for brick massonary valve pit with brick in CM (1:6) with 100mm thick PCC work 1:3:6 type C2 from fundation over 75mm thick hard core, sub class B brick full brick thick wall, 15mm thick internal and external plaster at bottom of the pit of size 1500x1500x1200 mm along with valve pit cover made out MS angle iron 50mm x 50mm x 6mm frame work, , MS platecover made out of 3.15mm thick with locking arrangment fixed over the valve pit including a coat of synthetic enamel paint over a coat of red oxide primer complete including necessary frame work welding, drilling etc all as directed by Engr-in-Charge. Please Enable Macros to View BoQ information |
