|
| 1 | Taking up cast iron water mains 150mm bore (inc all fittings) with spigot and socket ends and lead joint including burning out joints and accessories . complete all as specified and directed by Engineer-in-Charge. |
| 2 | Taking up or down GI tubing and connections of 80mm dia complete with socket/flanged joint and accessories incl cleanning for re-fixing/ re-laying or remove from site all as specified and directed by Engineer-in-charge. |
| 3 | Supply and laying in trenches galvanized steel water tubing medium grade ISI marked with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc. of 150mm bore of pipeline complete from all as specified and directed by Engineer-in-Charge .( Note :- Necessary excavation and earth work shall be measured and paid separately) |
| 4 | Supply and laying in trenches galvanized steel water tubing medium grade socket end ISI marked with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions etc. of 80mm bore of pipeline complete from all as specified and directed by Engineer-in-Charge. (Note :- Necessary excavation and earth work shall be measured and paid separately) |
| 5 | Supply and fixing of mild steel flange, heavy duty having wall thickness 12 mm suitable for 150 mm dia GI pipe including necessary rubber gasket, nuts and bolts etc, welding exceeding 9 mm but not exceeding 20 mm and securing properly with pipe all as specified and directed |
| 6 | Supply and fixing of mild steel flange, heavy duty having wall thickness 12 mm suitable for 80 mm dia GI pipe including necessary rubber gasket, nuts and bolts etc, welding exceeding 9 mm but not exceeding 20 mm and securing properly with pipe all as specified and directed |
| 7 | Excavation in trenches in hard/dense soil n. exc 1.5 mtr wide and n. exc 1.5 mtr depth for LT cable /GI tubing and getting out in any type of soil (soft/hard/dense/ disintegrated/rocky) all as specified. |
| 8 | M&L for returning, filling in including sperading, leveling watering and well ramming in layers n. exc 25 cm thick each layers in soil all as specified and directed. |
| 9 | M&L for removal of surplus soil to a distance not exceeding 50 mtr and deposting where directed and at a level not exceeding 1.5 mtr above the starting point all as specified and directed by Engr-in-Charge. |
| 10 | Supply and fixing of cast iron sluice valve for water supply purpose with C.I. drilled flanged ends (both ends) (integrally cast), stem of SS (AISI410) and bronze (gun metal), class PN- 1.6 conforming to IS- 14846, ISI marked with stainless steel spindle and iron wheel including jointing material complete such as rubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer of size 150 mm bore, complete all as specified and as directed. |
| 11 | Supply and fixing of cast iron sluice valve for water supply purpose with C.I. drilled flanged ends (both ends) (integrally cast), stem of SS (AISI 410) and bronze (gun metal), class PN- 1.6 conforming to IS- 14846, ISI marked with stainless steel spindle and iron wheel including jointing material complete such as rubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer of size 80 mm bore, complete all as specified and as directed. |
| 12 | M&L for construction of valve chamber of size 1200mm x 1200mm x 1200mm with 200mm thick solid concrete block masonary block casted using PCC 1:3:6 TYPE C- 1 mix, built in cement and sand mortar 1:6,and 15 mm thick plaster to internal surface and external surface up to 15 cm below ground level and top of floor in CM 1:4 finished even and smooth without using extra cement 15 mm thick, MS sheet cover including 40mm x 40mm x 3mm MS angle frame embedded in 150 mm thick PCC 1:2:4 type B-1, with 25mm x 6 mm flat iron hold fast, handles, hinges with locking arrangement (including pad lock) and preparation of surface, applying two coats of synthetic enamel paint over one coat of red oxide primer to all steel surface complete including necessary excavation and earth work complete all as specified and as directed. |
| 13 | M&L for construction of valve chamber of size 900 mm x 900 mm x 900 mm with 200mm thick solid concrete block masonary block casted using PCC 1:3:6 TYPE C- 1 mix, built in cement and sand mortar 1:6, and 15 mm thick plaster to thick internal surface and external surface up to 15 cm below ground level and top of floor in CM 1:4 finished even and smooth without using extra cement 15 mm thick, MS sheet cover including 40mm x 40mm x 3mm MS angle frame embedded in 150 mm thick PCC 1:2:4 type B-1, with 25mm x 6 mm flat iron hold fast, handles, hinges with locking arrangement (including pad lock) and preparation of surface, applying two coats of synthetic enamel paint over one coat of red oxide primer to all steel surface complete including necessary excavation and earth work complete all as specified and as directed. |
| 14 | M&L rolled mild steel in compound girders and stanchions lattice girders, arial masts, staging and the like including caps , bases, splices etc. built up from two or more beam or channel sections or angles with plates including all lattice bars, stiffeners, gusset plates,wire mesh etc. conforming to Fe 410-W (Gde-E-250) quality - A, for fabrication and support of GI pipe line work with painting of surface for one coat of primer and two coats of synthetic enamenled paint all as specified and directed by Engineer-in-Charge. |
| 15 | Boulder filling dry, hand packed tightly, as in wire crate apron bunds (wire crate measured separately) |
| 16 | Supply and fix 4 mm dia galvanised steel wire, 150mm x 100mm mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as specified and as directed. |
| 17 | Hand packing (any thickness) at back of walls over arches etc. and raising (or lowering) to the required level complete all as specified and as directed. |
| 18 | M&L for thrust block of size 1m x 1m x 1m, or size as per site requirement made out of RCC M-25, design mix, using 20mm graded crushed stone aggregate for foundations including rafts, footings, basement slabs for holding of raising main of 80 mm pipeline including complete dismantling of old block all as specified and directed. |
| 19 | M&L for thrust block of size 1m x 1m x 1m, or size as per site requirment made out of RCC M-25, design mix, using 20mm graded crushed stone aggregate for foundations including rafts, footings, basement slabs for holding of raising main of 150 mm pipeline including complete dismantling of old block all as specified and directed. |
| 20 | M&L for galvanised iron bends of bore upto 150 mm bore (any type,radius and angles) tapers any type (straight, bend, increasing, decreasing or double socket etc) tee pieces, single branch, 'Y' junction double branch, cross (all socket, spigot) collars, caps plug complete all as specified and directed. |
| 21 | Supply and fix air release valve metal cased body with both end flanged of size 80 mm bore capacity including removing of the U/S and testing complete all as directed by Engineer-in-charge. |
| 22 | Supply and fix air release valve metal cased body with both end flanged of size 150 mm bore capacity including removing of the U/S and testing complete all as directed by Engineer-in-charge. |
| 23 | M&L for formwork to sides of pillers posts, struts, piers,columns and stanchions in square or rectangular complete all as specified and directed |
| 24 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed |
| 25 | M&L 15mm thick cement plaster (1:6) on fair faces of brick work or concrete surfaces complete all as specified and directed |
| 26 | M&L for preparation of new distampered surfaces of walls and applying two finishing coat of oil bound distamper (oil emulsion ) on walls, including 3mm thick wall care putty, complete all as specified and directed. |
| 27 | M&L for preparation of old/existing distampered surfaces of walls and applying two finishing coat of oil bound distamper (oil emulsion ) on walls , complete all as specified and directed. |
| 28 | M&L 75mm thick PCC type B-2 (1:2:4) using 40mm graded stone aggregate as in sub floor, sub, floors and pavings etc complete all as specified and directed. |
| 29 | Dismantling floor earth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off permises |
| 30 | M&L for non-skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the surface over cement screed bed 15 mm thick in CM 1:4 base complete all as specified and directed. |
| 31 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25 cm watering, & removing surplus soil to a distance n exc 50m & making good surface in hard/ldense soil. complete all as specified and directed. |
| 32 | S & F hand rails , half round or other steel section or core for wooden hand - rail straight portion , drilled and countersunk for balusters running bars , for doors, balusters , nosing to steps including emeding in concrete posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching wire, etc: flat iron fillets ( for securing wire mesh etc) including all nescessary drilling , bolting or riveting , etc, and similar work conforming to Fe - 290 Gde E- 165 and screwing etc . wind ties for roof including securing bolts complete all as specifed and directed |
| 33 | M & L for 100 mm dia MS round bars for fixing of chain link fencing with post Fe - 410 W ( Grade E-250) quality or Fe 290 (Gde E-165) complete all as specified |
| 34 | S & F 12 mm dia 50 mm long MS screw bolt machine made with hexagonal or square head at one end and screwed the other, screwed end fixing with washer complete all as specified |
| 35 | M & L PCC 1:3:6 type C-2 ( 40 mm graded aggregate) as in foundation of posts and struts complete all as specified . |
| 36 | S & F mild steel security chain link fancing 60mm x 60mm mesh made out of 3mm dia MS wire and including binding wire complete all as specified and directed |
| 37 | Taking down old u/s CI sluice valve 150/80mm dia with complete dismantling with nut bolts and washer all as specified and directed by Engineer-in-Charge |
| 38 | Taking down old u/s CI air release valve 150/80mm dia with complete dismantling with nut bolts and washer all as specified and directed by Engineer-in-Charge |
| 39 | Schedule of Credit Works as listed in Schedule 'A' has been attached in tender in PDF format amount of schedule i.e Rs 57,90,731.00 shall be deducted from the total amount of BOQ to arive at the contract sum. Please Enable Macros to View BoQ information |
