|
| 1 | Taking down carefully aluminium point wiring (light, fan, socket or power) complete and making good disturbed surfaces of walls, floors, etc. all as directed.including taking down fittings such as switches, ceiling roses, regulators, sockets,lamp holders etc. |
| 2 | M&L for point wiring with two runs of FRLSH PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawing through in and including PVC casing capping of size not less than 20mm on surface of wall including provn of PVC box/modular metal flush box of suitable size for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm all as specified and directed.One light/fan/call bell point controlled by one switch one way 5 Amps. |
| 3 | All as per Sl Item no.2 but with One 2/3 pin socket outlet 5Amps on independent board. |
| 4 | All as per Sl Item no.2 but with One 3 pin socket outlet 5 Amps on the same board with other switches |
| 5 | All as per item No 2 above but one switch socket combination 15 Amps on independent board with cable 2.5 sq mm size and earth wire 2.5 sqmm . |
| 6 | S&F switch piano flush type single pole one way switch 5 Amps. |
| 7 | S&F switch socket combination 2 in 1, 5 Amps flush type. |
| 8 | S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal all as specified and directed. |
| 9 | S&F ceiling rose surface bakelite 3 terminals 65x50mm all as directed. |
| 10 | Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceilingrose complete. |
| 11 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V ACdecorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 12 | Supply and fix in repair Modular switch 1way 6A,1module |
| 13 | Supply and fix in repair Modular switch 1way 16A,1module |
| 14 | Supply and fix in repair Modular socket, 6A-2/3 pin combined 2 module |
| 15 | Supply and fix in repair Modular socket, 6A/16A-2/3 pin combined 2 module |
| 16 | M&L for Repairs to Surface/recessed mounting/ ceiling light fitting of 36/40 wattage including replacing all the unserviceable parts such as, driver worn out bolts, nuts, screws ,washers, partly wiring etc wherever required and make serviceable all as specified and directed. |
| 17 | M&L for Repairs to Surface/recessed mounting/ ceiling light fitting of 12/15/18 wattage including replacing all the unserviceable parts such as, driver worn out bolts, nuts, screws ,washers, partly wiring etc wherever required and make serviceable all as specified and directed. |
| 18 | S&F in repair Lamp holder angle type made of PVC/Polycarbonate with back plate. |
| 19 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC surface / recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 20 | Supply and fixing round/square shape 12 watt 220 volts AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete. |
| 21 | Supply and fixing round/square shape 15 watt 220 volts AC surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copperconductor cable of suitable size complete. |
| 22 | Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including taking down old unserviceable light fitting complte. |
| 23 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holderconnecting up with three core flexible copper conductor cable of suitable size. |
| 24 | S&F in replacement of MCCB 125 amps 4 pole 16 KA 415 volt complete including taking down all as specified & directed. |
| 25 | S&F in replacement of MCCB 100 amps 16 KA 4 pole complete all as specified & directed. |
| 26 | S&F in replacement of MCCB 63 amps 10KA complete all as specified & directed. |
| 27 | S&F in replacement, sheet metal enclosure distribution box suitable for MCB'S 4 way TPN 415 volts with 200 Amps rated bus bar double door complete including connecting up all as specified and making good distrubed surface |
| 28 | All as per item No. 27 above but 8 way SPN with 200 Amps rated bus bar , 240 volts |
| 29 | All as per item No 27 above but 4 way SPN with 200 Amps rated bus bar , 240 volts |
| 30 | S&F in replacement MCB Single pole, 240 volts 5 to 32 Amps 10 KA rupturing capacity, C series |
| 31 | S&F in replacement MCB Single pole, 240 volts 40 Amps 10 KA rupturing capacity, C series |
| 32 | S&F in replacement MCB Single pole & neutral 240volts 20 to 32 Amps, 10KA rupturing capacity, C series |
| 33 | S&F in replacement MCB triple pole 415 volts 25 to 63 Amps 10KA rupturing capacity, C series. |
| 34 | S&F in replacement MCB TPN 415 volts 40 to 100 Amps 10KA rupturing capacity, C series. |
| 35 | Taking down sub main wiring of any size complete all as specified and directed. |
| 36 | M&L for sub main wiring with two single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 4 sq mm drawn through suitable size of non-metallic PVC rigid conduit with 4 sqmm copper conductor cable as earth conductor of 4.0 sq mm and conduit accessories fixed up in surface including connecting up complete all as specified and directed. |
| 37 | M&L for sub main wiring with two single core stranded copper conductor unsheathed PVC insulated cable 1100V grade, 6 sq mm FRLSH drawn through suitable size of non-metallic PVC rigid conduit with 6 sqmm copper conductor cable as earth conductor of 6.0 sq mm FRLSH and conduit accessories fixed up in surface including connecting up complete all as specified and directed. |
| 38 | M&L for replacement of submain wiring alongwith earth wire with 4x10.0 sq. mm +1x10.0 sq. mm earth wire sq mm sizes of FRLS for is PVC insulated copper conductor, single core cable in existing /surface/recessed as required in PVC Conduit. |
| 39 | Taking down Exhaust fan of any size type and make after disconnecting the electrical connections ,cleaning, servicing , greasing removing and replacing all the unserviceable spare ,painting with two coats of synthetic enamel paint by means of suitable spray gun after cleaning and prepairing the suface including writing the MES No. ,fixing the same back to the original location all as directed. Note for item No. 40, 41 & 42 : (i) All the replaced spare for unserviceable spares will be measured and paid separately (ii) The rate quoted shall be deemed to include the cost of painting and minor spares such as split pin , screws washers etc. |
| 40 | Supply only ball bearing suitable for exhaust fans 300/450mm dia sweep. |
| 41 | Supply only Capacitor 4 mfd for exhaust fans. |
| 42 | Supply only gun metal bush suitable for exhaust fans of 300/450 mm sweep. |
| 43 | Supply only twin core flexible wire 1 Sqmm for connecting up ceiling fans, exhaust fans/wall mounting fan etc. |
| 44 | Taking down old burnt out copper winding wire from exhaust fan of any sweep and rewinding by using the same gauge of copper wire super enameled including heating and varnishing,cleaning, servicing,greasing ,refixing at siteand testing for smooth functioning complete all as specified & directed. |
| 45 | Supply only modular white cover plate with frame, 2 module ISI marked complete all as specified and as directed. |
| 46 | Supply only White cover plate with frame, 4 module ISI marked complete all as specified and as directed. |
| 47 | Supply and fix White cover plate with frame, 6 module ISI marked complete all as specified and as directed. |
| 48 | Supply only White cover plate with frame, 8 module ISI marked complete all as specified and as directed. |
| 49 | Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers connected to and including GI earth wire 4.0 mm dia upto 7.5 mtr by means of bolts, nuts, check nuts and washers, and protected by light grade 20 mm dia and connected to main control board and GI pipe medium grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c and PCC chamber pit with P C C 1:2:4 Type C2 (including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 metre and testing after completion including dismantling of old unserviceable earthing all as specified and shown on plate No 3 of SSR Part-I 2009 |
| 50 | S&F in replacement earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried inground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire |
| 51 | S&F in replacement for 20 mm bore galvanised steel water tubing medium grade with all fitting laid in trenches including taking out old unserviceable pipe complete all as specified. |
| 52 | Repair / servicing including trouble shooting /repair of geyser 25 to 50Ltrs capacity checking of serviceability of individual parts such as thermostat, heating element, pressure release valve, inlet/outlet connections etc, replacing worn-out fasteners and defective components and testing including taking down the geysers and refixing the same after repairs. Note : Spare parts including replacement will be measured and paid separately under relevant item. Rate quoted shall include replacement of worn-out fasteners. |
| 53 | Supply only heater coil of geyser all 1.5 KW as per existing make / model / size conforming to relevant IS.(as required at site) |
| 54 | All as per item No 53 above but 2.0 KW (as required at site) |
| 55 | Supply only thermostat for any type /make/capacity of geyser .(as required at site) |
| 56 | Supply only pressure release valve 15mm dia with new one for any type /make/capacity of geyser . |
| 57 | Supply only PVC flexible connection of 15 mm dia 600 mm long with check with new one suitable for cold/hot water connection of geysers |
| 58 | Supply and Fix in replacement 20 mm Non return valves, cast copper alloy, for GI Pipes pipe all as directed |
| 59 | Taking the copper or steel container carefully from the geyser, descaling, rectifying leakage by braising, resetting the insulating (glass wool), testing for the required pressure replacing rubber gaskets, worn-out fasteners etc,. with new ones complete all as directed by Engineer in charge. |
| 60 | Supply and Fix Base plate of Water Heater of 25 / 50 Ltrs Capacity all as directed |
| 61 | S&F in replacement of Single pole and neutral Sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB SP 20 Amps, 240 Volts, AC,50 HZ, completete all as directed and specified, including taking down old unserviceable plug socket and offering for credit. Please Enable Macros to View BoQ information |
