|
| 1 | Cat (A) -Items to be supply and fixing |
| 2 | Excavating in trenches in soft/loose soil not exc. 1.5 m wide and not exc.1.5 m in depth; for foundation, getting out etc. complete. |
| 3 | Excavation over areas in soft/loose soil not exceeding 1.5 m deep and getting out etc. complete. |
| 4 | M & L for moorum filling in floors & paving, laid in layers not exceeding 15 cm thick in each layer, spread, leveled, watering, & rammed, level the surface to a true plain surface etc. complete. |
| 5 | M & L for hardcore of broken stone of gauge not exc. 63mm, deposited, spread, leveled in layers not exc.15 cm thick, filing of voids with moorum, watered, leveled etc. complete. |
| 6 | M & L Cement concrete in foundation, Type-B-2 1:2:4 (40 mm graded aggregate) for filling and mass concrete with necessary formwork, compaction, curing etc. complete. |
| 7 | S & F mild steel work in framed work such as barred iron doors conforming to Fe.290.Gde-E-165 Make:- Jindal, TATA, SAIL or equivalent etc. complete. |
| 8 | M & L Cement concrete in Posts Type B1, 1:2:4 (20mm graded aggregate) including necessary formwork, compaction, curing etc. complete. |
| 9 | M&L for Brickwork with fly ash bricks in C. M. 1:6 with sub class “B” bricks, straight or curved on plan exc. 6m mean radius including scaffoldings, curing etc. complete. |
| 10 | M & L Cement concrete Type B1 1:2:4 (20 mm graded aggregate) for coping over wall & throating with necessary formwork, compaction, curing etc. complete. |
| 11 | S & F mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, Make:- Jindal, TATA, SAIL or equivalent etc. complete. |
| 12 | Supply only chain link MS galvanized fencing, any size or type etc. complete. |
| 13 | Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts etc. complete. |
| 14 | S&F TMT bars 10mm dia. & over, ISI mark, cut to length, bent to shape required, including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete. |
| 15 | S& F TMT bars 6 to 8 mm dia., ISI mark, cut to length, bent to shape required including cranking, binding with mild steel wire (annealed) not less than 0.9mm dia. etc. complete. |
| 16 | M & L for 100mm thick cement concrete in floor Type B-1, 1:2:4 using 20mm graded aggregate with finishing the concrete even without using extra cement, compaction, curing etc. complete. |
| 17 | M & L Sand/crushed stone dust filling in under floors or filling below paver blocks including watering and consolidating, watering etc. complete. |
| 18 | S & F Super glaze series 60mm thick interlocking cement concrete coloured rubber moulded paver blocks, compressive strength M-35 grade with gray cement and pigment, etc. complete. |
| 19 | M & L PCC in kerb stone Type B1 1:2:4 mix (20mm graded aggregate) including necessary formwork, compaction, curing etc. complete. |
| 20 | M & L for 150mm thick cement concrete in floor Type B-1, 1:2:4 using 20mm graded aggregate, finishing cement concrete surface even & smooth using extra cement, compaction, making impression with expanded metal whilst the concrete is green, curing etc. complete. |
| 21 | Rendering plaster 15 mm thick in C.M. 1:4 including finishing the surface even and smooth without using extra cement, using necessary scaffolding, curing etc. complete. |
| 22 | Returning, refilling excavated Soil in trenches, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick etc. complete. |
| 23 | Removing excavated soil materials not exc. 50 m and depositing where directed at level n. exc. 1.50m above the starting point etc. complete. |
| 24 | M & L for Synthetic enamel painting - 2 coats on ironwork over 01 coat of primer of Make- Asian / Berger / Nerolac / Shalimar of equivalent paints of 1st quality etc. complete. |
| 25 | M & L Cement painting on walls of new surfaces - 2 coats over one coat of primer including all preparatory works, curing wall surfaces etc. complete. Please Enable Macros to View BoQ information |
