|
| 1 | Earth work Excavation for pipe line in trenches and pits up to 1.5 meters depth in open area where disposal of surplus earth is done alongwith alignment, including trimming and dressing sides, levelling of beds of trenches to correct grade, cutting joint holes, refilling; consolidation and watering of refill in 15cm layers and Restoration of unmetalled or unpaved surface to its original condition excluding cost of shoring and timbering but including the cost of dewatering of rain water, diversion for traffic, night signals, providing & fixing caution boards, watching, fencing etc. (a) Depth upto 1.5 mtr. |
| 2 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 3 | First class brick masonary 229 mm thick laid in cement sand mortar 1.6 in foundation and plinth including supply recarriage of bricks cement . |
| 4 | 10mm thick cement plaster 1.4 on sides walls (-) Rs.1.25/- for scaffolding. |
| 5 | 10mm thick cement plaster 1:4 on bed and top. |
| 6 | Reinforced cement concrete 1:2:4 hand mixed but including steel reinforcement |
| 7 | Cement Conc.1:2:4 including supply, carriage & with stone ballast or shingle |
| 8 | Cement concrete 1:4:8 with brick ballast 40mm gauge |
| 9 | Laying of DWC Pipe 300mm dia Trenches & Laying same to correct allignment (Complete) |
| 10 | Providing and fixing of G.I pipe 50 mm for air vent valve complete in all respect to the specification of engineer in charge |
| 11 | Wrought Iron and mild steel ladders, framed grills, grating etc. complete fixed in position in D-tank |
| 12 | Providing & fixing M.S. foot rests made of 23x25 mm square bar including fixing in Haudis complete with cement concrete 1:2:4 |
| 13 | Providing and fixing of Alfa Alfa Valve fitted on riser pipe to act as Nakka (D regulators) 300mm Dia |
| 14 | Centreing &shuttering for Concerte faces |
| 15 | Providing & Fixing of Steel Shutter Gate Assembly in Main Pipeline complete in all respect. 300mm dia |
| 16 | Dismantling of Brick work in Cement |
| 17 | Providing and fixing DWC of 90 Degree bend SN4 testing commisioning and complete in all respect to the specification of engineer in charge (300mm) |
| 18 | Providing and fixing DWC of 45 Degree bend SN4 testing commisioning and complete in all respect to the specification of engineer in charge (300mm) |
| 19 | Providing and fixing DWC of equal tee bend SN4 testing commisioning and complete in all respect to the specification of engineer in charge (300mm) |
| 20 | Providing and fixing MS Service Saddle (6kg/cm2) pressure including testing, commissioning and complete in all respect to the specification of enginner in charge (300X50mm) |
| 21 | Providing and fixing DWC end cap SN4 300mm dia Please Enable Macros to View BoQ information |
