|
| 1 | Dismentalling of RCC Slab |
| 2 | Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantledmaterialsuptoalead of1000meters, stackingserviceableandunservi ceablematerials separately as per technical clause 202 of MORT&H specifications |
| 3 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary soil, Mechanical Means, Depth up to 3 m |
| 4 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical SpecificationsPCC Grade M15, Height up to 5 m |
| 5 | Plain/Reinforced cement concrete M-25 in sub structure complete as per drawing and technical specifications.with batching plant transit mixer and concrete pump |
| 6 | Plain/Reinforced cement concrete M-30 in sub structure complete as per drawing and technical specifications.with batching plant transit mixer and concrete pump upto ht 5mtr |
| 7 | Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and MoRT&H Specifications |
| 8 | Drainage Spouts complete as per drawing no. SD/205 and MoRT&H MoRT&H specification clause 2705 with 6 meter long GI 100 mm dia drainage GI light grade pipe (For Bridges) |
| 9 | Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification. |
| 10 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work,mettalic or plastered,concrete surface to give an even shade. |
| 11 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 12 | Applying priming coat with cement primer in all shades on newly plastered or concrete exterior surface |
| 13 | Painting New letters and figures on black synthetic enamel paint to an even shade on surface |
| 14 | Cement concrete 1:4:8 with stone aggregate 40mm gauge mixing By Mechanical Means using concrete mixer volumetric type. |
| 15 | Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer-inCharge |
| 16 | Hazard Marker sign board 300x900mm rectangular as per IRC 67- 2012 with high intensity Microprismatic grade retro reflective Sheeting type IV as per ASTM D 4956 09 and IRC 67 2012, fixed over 4mm thick Aluminium Composite Material (ACM) sheeting having skin thickness of 0.4 to 0.5 mm on both sided and fixing the same with suitable size aluminium alloy rivets @ 200 mm c/c to back support frame of 25x25x3mm angle iron supported on a square hollow steel section post 60x60x3.2mm conforming to IS 4923 firmly fixed to ground including foundation concrete M-25 of size 0.45x0.45x0.60m for vertical post complete as per clause 801 of MORT&H specifications using high intensity microplastic grade retro reflective sheeting type XI as per ASTM D 495609 and as per IRC 67 2012 |
| 17 | re-handling of earthwork |
| 18 | Extra for laying earth as per specification for compaction in 20 Cm. layers and dressing including the cost of rolling and watering as per P.W.D specifications. |
| 19 | Provision of an Reinforced cement concrete crash barrier at the edges of the road, approaches to bridge structures and medians,constructed with M-40 grade concrete with HYSD reinforcement conforming to IRC:21 and dowel bars 25 mm dia, 450 mm long at expansion joints filled with pre-moulded asphalt filler board, keyed to the structure on which it is built and installed as per design given in the enclosure to MOST circular No. RW/NH -33022/1/94-DO Ill dated 24 June 1994 as per dimensions in the approved drawing and at locations directed by the Engineer, all as specified |
| 20 | Providing weep holes in Brick masonry/Plain/ Reinforced concrete abutment, wing wall/ return wall with 100 mm dia PVC pipe, extending through the full width of the structure with slope of 1V :20H towards drawing foce. Complete as per drawing and Technical Specifications |
| 21 | Excavation of soil using hydraulic tractor trolly including cutting and loading in trolly and transporting to embankments all locations including lifts and leads Please Enable Macros to View BoQ information |
