|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level. DSR 4.1 |
| 2 | 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) DSR 4.1.3 |
| 3 | 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size). DSR 4.1.8 |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: DSR 6.1 |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.1.1 |
| 6 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level inall shapes and sizes in : DSR 6.4 |
| 7 | Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 8 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. DSR 8.2 |
| 9 | Granite of any colour and shade DSR 8.2.2 |
| 10 | Area of slab over 0.50 sqm DSR 8.2.2.2 |
| 11 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. DSR 18.1 |
| 12 | 15mm nominal bore DSR 18.10.1 |
| 13 | 20 mm nominal bore. DSR 18.10.2 |
| 14 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : DSR 18.17 |
| 15 | 15 mm nominal bore DSR 18.17.1 |
| 16 | 20 mm nominal bore DSR 18.17.1A |
| 17 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : DSR 18.46 |
| 18 | 15 mm nominal bore DSR 18.46.1 |
| 19 | 20 mm nominal bore DSR 18.46.2 |
| 20 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. DSR 18.48 |
| 21 | Supplying and Installation of 400 Ltrs Capacity Drinking Water Cooler having (+10%) following specification, full body stainless steel SS 304, ISI marked of approved make |
| 22 | Storage Capacity: 400 Ltrs |
| 23 | Cooling Capacity: 150 LPH |
| 24 | Tank Material: SS 304, Body SS |
| 25 | BIS Approval IS 1475 |
| 26 | Make Blue Star/Voltas/Climatrol approved by BIS |
| 27 | Supplying & Fixing of Water Purifier with 3 Stage Purification system consisting of sediment filter, Activated Carbon Filter and Ultravoilet treatment having purification capacity of 200 LPH, water control sensor for automatic control of purifier as per level of water cooler and valve for back flushing of sediment filter complete of make Aquaguard, Kent, Blue Star or equivalent make in the same range of AOR |
| 28 | Providing and fixing of Voltage Stablizer suitable for (4 KVA) 15 Ampere capacity working range 150 VAC to 285 VAC with low and high voltage cut off protection , built in thermal overload protection, digital / analog display for input / output voltage, wall mouted type, with metal cabinet complete of make V-Guard model VND 400 or equivalent model of Deol, Luminous, Microtech |
| 29 | Cooler Stand of MS angle ( 40 x 40x 5) Height up to 1'-6'' H.T Complete.) |
| 30 | Providing & fixing IRC encloser jali of mesh size 40 mm x 40 mm of 10 gauge with frame work of MS angle 40x40x5 mm and MS flat 32x5 mm including painting with two coats of synthetic enamel paint over a coat of steel arrangeent all as specified. (Size of angle grid should not be more than 12 sft) with two coats of black paint as per site requirement as desired by EIC Please Enable Macros to View BoQ information |
