|
| 1 | Taking down chowkhat with shutter (without taking down shutters from the frame) area n.exc 1.5 sqm each complete all as specified and directed. |
| 2 | All as per BOQ Serial item No.1 above but area exc 1.5 sqm but n.exc 4.0 Sqm each complete all as specified and directed. |
| 3 | Resuring, Easing /adjusting without taking down shutter; area of shutter exc 1.0 sqm not exc 2 sqm complete all as specified and directed. |
| 4 | S&F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm plain colour PVC sheet reinforced with M.S Square tube fixing in opening complete all as specified and directed. |
| 5 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC 'C' channel having PVC sheet strip of 20 mm width stuck inside with solvent cement for top rail and bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fitted in the MS frame welded/seated to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site complete all as specified and directed. |
| 6 | S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for largegates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 7 | S&F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 8 | S&F 30 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) and fitted to chowkats complete all as specified and directed. |
| 9 | S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 10 | S&F Factory made single extruded WPC(Wood polymer composite) solid door frames of size 45 x 70mm comprising of virgin PVC polymer of K value 58-60 (Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), mimimum compressive strength of 58 N/Sqmm and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof & fire retardant & fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 11 | S&F Factory made single extruded WPC(Wood polymer composite) solid flush door shutter of 30mm size comprising of virgin PVC polymer of K value 58-60(Suspension grade), calcium carbonate & natural fibres and non-toxic additives fabricated with mitre joints after applying PVC solvent cement and screwd with full body threaded star headed SS screws having minimum density of 650 Kg/cum, screw withdrawal strength of 1800 N(Face) & 900 N (Edge), mimimum compressive strength of 50 N/Sqmm, modulas of elasticity 850 N/sqmm & resistance to spread of flame of class A category with property of termite/borer proof, water/moisture proof & fire retardant & fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS screws, complete all as specified and directed. |
| 12 | S&F Aluminium anodised (powder coated) Three track sliding window frame with shutters with (2 nos glazed and one wire gauzed shutter) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete with glazing and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers including deco aluminium grill with the following section of frame and shutter complete all as specified and directed:- (A) Sections for shutter :- (i) \\"H'' section 38 x 20 x 1.50 mm thick. (ii) 'Interlock' section 38 x 20x 1.50 mm thick. (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick.(B) Section for frame :- (i) Top & Sides 92.36 X 29.70X 1.60mm thick. (ii) Bottom 92.36 X 29.70 X 1.60mm thick |
| 13 | Taking down shutters of any description area exceeding 1 Sqm and not exc 2 Sqm each at any storey of building complete all as specified and directed. |
| 14 | S&F 18/19mm thick prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as specified & as directed. |
| 15 | S&F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (when open) 30 mm at any storey of building complete all as specified & as directed. |
| 16 | S&F Hasp and staple, safety type,brass with mild steel hinge pin including bolt to hinge plate and fixed with screws at any storey of building complete all as specified & as directed. |
| 17 | S&F 100mm MS Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed. |
| 18 | S&F 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 19 | S&F 200mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 20 | S&F 150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 21 | S&F 100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 22 | S&F 300mm long aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet,cast or extruded section and fixing bolt of extruded section or cast aluminium alloy and fixed complete all as specified and directed. |
| 23 | S&F 140mm long Floor door stopper of brass body and tongue with hard drawn steel spring, fixed in floor complete all as specified and directed. |
| 24 | S&F PVC ventilator fixed type half portion with 4 mm frosted glass and half portion stainless steel wire cloth, 0.63 mm dia of wire and average width of aperture 1.18 mm including taking down old ventilator ant type complte all as spd and directed. |
| 25 | Preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth and M&L for applying two coats of synthetic enamel paint over & including one coat of pink primer complete all as specified and directed. |
| 26 | Preparation of old steel surfaces of any description over 10cm width or girth and M&L for applying one coat of synthetic enamel paint complete all as specified and as directed . |
| 27 | S&F in repairs 3.00 mm sheet glass, ordinary quality and glazing with oil putty in Sq n exc 0.50 Sqm in each pane complete all as specfied and diected. |
| 28 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specfied and directed. |
| 29 | Taking down cement plaster including raking out joints, hacking for key, scrubbing down with water etc including removal of debris outside MoD land complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 30 | M&L for rendering 15mm thick in CM (1:6) on other than fair face of brick work or concrete surfaces and finished the surface even and smooth without using extra cement complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 31 | M&L for rendering 10mm thick in CM (1:3) on brick or concrete surfaces and finished the surface even and smooth without using extra cement as in ceilings complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 32 | M&L for applying 2mm thick wall care putty in 2 layers (each layer n.exc 1mm thick) on new plastered surfaces etc incl necessary arrangement for working platform complete all as specified and directed.Note: Work shall be carried out in bldgs with height upto 12 storey. |
| 33 | M&L for applying two coats of acrylic distemper (colour/shade as approved) over & including one coat of priming chalk whiting on new or previously untreated plastered surfaces incl preparation of surface of wall and incl necessary arrangement for working platform complete all as specified and directed.Note: (i) Work shall be carried out in bldgs with height upto 12 storey.(ii) No separate payment shall be made for change of colour where required. Cost is deemed to be included in unit rate. |
| 34 | Preparation of new plastered surfaces of ceilings and M&L for applying three coats of oil bound distemper over & including a coat of primer complete all as specified and directed. |
| 35 | S&F factory made PVC shutter/shelves in required size and shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain / coloured for kitchen cabinets including required frame work with panels shall be fabricated using adhesive, screws and solvent cement etc where ever required and all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as specified and as directed. |
| 36 | S&F in repairs 4 mm thick HPSC (High pressure steam cured) pre- primed, self embossed textured designer board, water resistant termite resistant, fire resistant for insulation and accustic purpose to be placed in the grid system complete all as specified and directed. |
| 37 | Dismantling of interlocking tile 60-80mm thick including removal of debris outside MoD land complete all as specified and directed. |
| 38 | Supplying and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over & including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 39 | Supplying and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand and complete all as specified and as directed. |
| 40 | S&F in repairs stainless steel curtain rod anodised aluminium alloy 25 mm dia with pair of suitable brackets,finnels and also making good the wall surface to match the existing surfaces complete all as specified and directed. Please Enable Macros to View BoQ information |
