|
| 1 | Chair Writing (FD-1107) M&L for replacement of damaged/ broken parts of chair writing with first class shesham wood and fitted or readjusting as per Drg complete chair as specified & shown on Drg as directed by Engineer-in-Charge for the following :-Front legs |
| 2 | Rear legs |
| 3 | Front/back rails for seats |
| 4 | Bottom stiffeners |
| 5 | Hand rests |
| 6 | Re-Canning of chair CB With arms with new PVC plastic 2 mm thick half round white plastic cane and Border canning with 4mm wide Plastic cane complete including taking out old damaged cane carefully as specified & shown on drg as directed by Engineer-in-Charge. |
| 7 | Polishing with Hi-gloss French polish to match with the existing complete to the Chair writing wooden including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge. |
| 8 | Table Office Clerk WoodenTaking out Unserviceable table top from Table office clerk and Supply & fixed new table top made with 18 mm thick pre laminated particle board exterior grade conforming to grade -1 & type III(PL particle-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge. |
| 9 | Taking out Unserviceable/ damaged legs from table office clerk and Supply & Fixed new legs of table office clerk made of seasoned Shisham wood matching with the existing shape & sizes including PVC or rubber shoe at the bottom of leg to match the existing complete as specified & directed by Engineer-in-Charge. |
| 10 | Taking out Unserviceable/ damaged front or back rails from table office clerk and Supply & Fixed new rails of table office clerk made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge. |
| 11 | Taking out Unserviceable/ damaged side rails from table office clerk and Supply & Fixed new side rails of table office clerk made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge. |
| 12 | Taking out Unserviceable/ damaged center stiffener from table office clerk and Supply & Fixed new center stiffener of table office clerk made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge. |
| 13 | Taking out Unserveceable/ damaged side stiffener from table office clerk and Supply & Fixed new side stiffener of table office clerk made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge. |
| 14 | Taking out unserviceable/ damaged drawers from Table office clerk and Supply & Fixed new table drawers made with 12mm thick seasoned sheasham wood except bottom & bottom of drawers shall be of 6mm thick ply wood commercial type BWR grade Make: Century/ Kit Ply or Sudarshan Including PVC or wooden Knob complete as shown on drg & directed by Engineer-in-Charge. |
| 15 | Varnish polishing to match with the existing complete to the Table office clerk including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge. |
| 16 | Teapoy wooden (FD – 232, 278 AND 34)Taking out Unserviceable top from Teapoy wooden and Supply & Fixed new top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge |
| 17 | Taking out Unserveceable leg from Teapoy wooden and S&F new leg made of seasoned Shisham second class wood including rubber shoe with screws at the bottom of leg matching with the existing shape & size, complete all as specified & directed by Engineer-in-Charge. |
| 18 | Taking out Unserveceable front/back rails from Teapoy wooden and S&F new front/back rails made of seasoned Shisham second class wood matching with existing shape & size complete all as specified & directed by Engineer-in-Charge. |
| 19 | Polishing with Hi-gloss French polish to match with the existing complete to the Teapoy wooden including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge. |
| 20 | Table writing with Drawer [FD-249,275 & 33]Taking out Unserveceabletabke top from Table writing and Supply & fixed new table top made with 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge. |
| 21 | Taking out Unserveceable/ damaged legs from table writing and Supply & Fixed new leg made of seasoned Shisham wood matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge. |
| 22 | Taking out Unserveceable/ damaged front or back rails from table writing and Supply & Fixed new rails made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge. |
| 23 | Taking out damaged centre stiffener from table writing and Supply & Fixed new centre stiffeners made of seasoned Shisham wood to matching with the existing shape & sizes complete as specified & directed by Engineer-in-Charge. |
| 24 | Taking out Unserveceable/ damaged Shutter from table writing and Supply & Fixed new Shutter made of 18 mm thick Pre-laminated particle board Exterior BWR grade one side teak face of Make: Novapan/ Kit Ply sides covered with 4mm thick teak wooden or PVC beading all around the shutter including piano type hinges, 40 mm dia PVC knob & 6 lever steel lock with duplicate key of godrej patteren best quality complete as shown in drg & as directed by Engineer-in-Charge. |
| 25 | Taking out unserveceable/ damaged back plywood from box of table writing and Supply & Fixed new back made with 6mm thick plywood commercial Exterior grade BWR Make: Century/ Kit ply or Sudarshan complete as Shown on drg & directed by Engineer-in-Charge. |
| 26 | Varnish polish to match with the existing complete to the Table writing including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge. |
| 27 | Table Computer (ICF)Supply & fixing in replacement of old unserviceable table top & Buttom made out of 18 mm thick pre laminated particle board exterior grade conforming to grade -1 & type III(PL Particle-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification) with 1mm thick PVC beading |
| 28 | (b)Removing existing U/S telescopic channel ,Supply & fixing in replacement of old unserviceable computer table telescopic channel for Key board as per existing size 20/25 mm as shown on drawing and as directed. |
| 29 | Supply & fixing in replacement of old unserviceable table Side (left & Right) made out of 18 mm thick pre laminated particle board exterior grade conforming to grade -1 & type III(PL particle-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification) with1mm thick PVC beading |
| 30 | Table centre (FD- 174, 235 AND 274)Taking out Unserveceable top from table center and Supply & Fixed new top made of pre-laminated particle board one side teak face Exterior grade BWR 18mm thick Make: Archid/ Century/ Asis ply duly covered with 4mm thick teak wood beading with polishing all around the table top complete all as shown in drg & directed by Engineer-in-Charge. |
| 31 | Taking out Unserveceable leg from table center and S&F new leg made of seasoned Shisham second class wood including rubber shoe at the bottom of leg matching with the existing shape & size complete all as specified & directed by Engineer-in-Charge. |
| 32 | Taking out Unserveceable long rail from table center and S&F new front/ back rail made of seasoned Shisham second class wood matching with existing shape & size complete all as specified & directed by Engineer-in-Charge. |
| 33 | Taking out Unserveceable side rails from table center and S&F new side rails made of seasoned Shisham second class wood matching with the existing shape & size complete as directed by Engineer-in-Charge. |
| 34 | Polishing with Hi-gloss French polish to match with the existing complete to table center including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge. |
| 35 | Table peg (FD – 236, 277 AND 25)Taking out Unserveceable top from table peg and Supply & Fixed new top made of 18 mm thick pre laminated MDF board exterior grade conforming to grade -1 & type III(PL MDF-13 Designation )as per IS 14587), One side teak face in Baverian beach shade and balancing white lamination on other side Make(as specified in particular specification )including 6 mm thick first class hard wood (MP Teak) edging all around the top complete as shown in drg & directed by Engineer-In-Charge. |
| 36 | Taking out Unserveceable leg from table peg and S&F new leg made of seasoned Shisham second class wood including rubber shoe at the bottom of legs fixed with steel screws matching with the existing shape & size complete all as specified & directed by Engineer-in-Charge. |
| 37 | Taking out Unserveceable front/ back rails from table peg and Supply & Fixed new front/ back rails made of seasoned Shisham second class wood matching with existing shape & size, complete all as specified & directed by Engineer-in-Charge. |
| 38 | Polishing with Hi-gloss French polish to match with the existing complete to the Table Peg including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
| 39 | Polishing with Hi-gloss French polish to match with the existing complete to the Table Peg including preparation of old wooden surface complete all as specified & directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
