|
| 1 | Taking down cement plaster on brick, concrete stone surfaces etc including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed |
| 2 | M & L 10 mm thick rendering on cement mortar 1:6 on brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed |
| 3 | Material and labour for 10mm thick rendering in cement mortar (1:3) on brick or concrete surfaces of ceiling finshed even and smooth without using extra cement. complete all as specified and directed |
| 4 | M & L for 15mm thick rendering in cement mortar 1:4 on brick , concrete and roof surface with WPC @ 200ml per 50Kg by weight of cement finishing the surfaces even & fair, complete all as directed.(WPC will be measured and paid separately). |
| 5 | Supply only Liquid water proofing compound. |
| 6 | Material and labour for Complete removal of existing treatment for old wall surface, including washing down and stopping of distempered surfaces and applying two coat of distempered oil emulsion over 1mm thick wall care putty all as specified and directed. |
| 7 | Material and labour for 1 mm thick wall care putty on wall all as specified and directed. |
| 8 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified and directed. |
| 9 | Material and labour for preparation of old previously treated plastered surface of ceilings including cornices etc, and cleaning by brooming down and applying two coat of white wash on ceilig all as specified and directed. |
| 10 | Material and labour for preparation of old distempered surface of walls including washing down and stopping of distempered surfaces and applying one coat of distempered oil emulsion all as specified and directed. |
| 11 | M & L for preparation of new external plasterd surface of wall and ceiling apply of birla white putty, make the surface smooth by rubbing with emary paper and applying two coats of weather proof paint over a coat of water thinkable cement primer complete all as specified and directed |
| 12 | M & L for preparation of old plasterd surface of wall and ceiling apply make the surface smooth by rubbing with emary paper and applying one coats of weather proof paint complete all as specified and directed |
| 13 | M & L for preparing new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 14 | M&L Preparing new plastered surfaces of wall and applying Two coats of acrylic distemper/ distemper oil emulsion (OBD), over a coat of 1mm thick wall care putty all as specified including preperation of surfaces complete all as specified and directed |
| 15 | M&L Preparing newly plastered surfaces of ceilings and applying three coats of white wash, complete all as specified and directed. |
| 16 | M&L for writing letters or figureswith synthetic enamel paint (Block. Roman, Italic or Indian) n exc. 30 cm high,complete all as directed. |
| 17 | Dismantling of wall and ceiling boards any type and thickness including cover fillets, complete all as specified and directed. |
| 18 | Supply and fix 600mmx600mmx4mm thick ‘E’ Board Classic (Make-Everest industries Ltd) as in false ceiling including supply and fixing GI ‘Tee” grid frame work made of special section of M.S galvanized sheet 0.30mm thick , bottom portion painted with cellular nitro painting, warping the suspending wire around the existing wooden/steel purlin /rafter for suspending grid frame work of size 605mmx605mm suspended with 4 mm dia GI wire @ 1200mm c/c on main Tee and fixed to T-grid with the help of level clip or as per manufacturer direction. The section consisting of main Tee 37mmx24mmx0.60mm, cross runner tee 37mmx24mmx0.60mm and perimeter angle of 24mmx24mmx0.50mm thick. Perimeter angle to be fixed to wall with GI screw of 40mm long @ 450 mm c/c along the perimeter of wall including applying two coats of distemper oil emulsion complete all as specified and directed |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off from the site, complete all as directed. |
| 20 | M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in sub floor finishing cement concrete surface even and smooth using extra cement complete all as specified and directed |
| 21 | M&L for 15 mm thick screed bed in CM 1:4 for laying floor tiles, complete all as specified and directed |
| 22 | M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding .18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade, complete all as specified and directed. |
| 23 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 24 | M&L for dark shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 25 | M&L for light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting, dados and riser to steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 26 | M & L for 10mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished rough to receive tiles . |
| 27 | M & L for 450x300x7mm mm thick glazed coloured ceramic tiles on vertical surface of wall set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade. |
| 28 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc and removal of rubbish from site, complete all as specified and directed.. |
| 29 | M&L18- 20 mm thick granite (of any type) work (table rubbed and polished) in cooking platforms in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including moulding of edged,complete all as specified and directed. |
| 30 | M&L for 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding of edges if reqd, complete all as specified and directed. |
| 31 | Demolition of precast cement concrete articles and precast concrete block walling built in cement mortar, comlpete all as directed |
| 32 | M&L for precast cement concrete 1:3:6 type C1 using 20 mm graded aggregate block solid building blocks or slabs in not exc 10cm thick (with plain or interlocking joints as directed ) complete set in CM 1:4 |
| 33 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for, complete all as directed. |
| 34 | M&L Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips. complete all as specified and directed |
| 35 | Material and labour for form work to slabs, chajja with fair finish surfaces complete all as specified and directed. |
| 36 | Material and Labour for reinforced Cement Concrete nominal mix 1:2:4 (using 20 mm graded crushed stone aggregate) type B1 in CM 1:6 as in chajjas, slabs work including removing rubbish off the premises complete all as specified and directed. |
| 37 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.50 Sqm but not exc 4 Sqm, complete all as directed. |
| 38 | Taking down shutters of any description not exc1.00 sqm each,complete al as directed. |
| 39 | S & F mild steel bands, straps, clamps, hold fasts, wall ties and similar articles conforming to Fe-290-O, complete all as specified and directed. |
| 40 | S & F 2nd class hard wood plain solid straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed |
| 41 | S&F 35 mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail and panel of 9 m BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rails and stiles as per IS 1003 ( part I) kiln seasoned and chemically pressure treated complete all as specified and directed |
| 42 | S&F 30 mm thick second class hard wood glazed and skelton shuters , open rebated and prepared to receive galss , gauze , etc, divided into squares, with plain , chamfered or rounded fitted with cut and mitred and rebated shash bars any numbers beads for securing glass, etc sizes of members of shutters as speified in SSR Part I section 8 , clause 8.24, complete all as specified and directed. |
| 43 | S&F 30mm flush shutters, solid core construction with particle board core and plywood face panels, commercial type on both side and both face is covered with decorative face veneer with lipping/frame tp match all as completed and specified as directed. |
| 44 | S & F for 18mm Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work as in shutters for kitchen cabinate/cupboard shutters etc complete all as specified and directed, |
| 45 | S&F solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed. |
| 46 | S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 47 | S & F 100mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 48 | S& F Aluminium anodised barrel tower bolts 150mm long of extruded section and fixed |
| 49 | S & F 150mm size extruded aluminium alloy handles, fabricated type anodised |
| 50 | S&F pre coated mild steel floor door stopper ,tongue anodized 140mm length including vulcanised rubber piece |
| 51 | Supply and Fix in repair toilet paper holder supar of brass chromium plated fitted to wall with CP/ brass screws of Make - SONA (Code AL 1001 ) complete all as specified and directed” |
| 52 | S&F in repair Harrison rails( curtain rail), mild steel,chromium plated with fixing brackets,stops,rollers etc, complete all as sspecified and directed. |
| 53 | S & F aluminium alloy, anodised, sliding door bolts 250 mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 54 | Hacking out old broken glass (any thickness, size quality or description) from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 55 | S & F sheet glass 3mm thick ordinary quality and glazing with oil putty/glazing clips/beadings in squares n exc 0.50 Sqm in each pane. |
| 56 | S & F 3mm thick figured glass, pin head glazing with oil putty/glazing clips/beading in squares n exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 57 | S&F for 50mm dia, polished, hard wood knobs fixed with screws, complete all as specified and directed. |
| 58 | S&F for Continuous (piano) hinges, mild steel, bright finish or electro galvanised, 30 mm wide flap (when open), complete all as specified. |
| 59 | S&F in repair for continuous (piano) hinges, mild steel, bright finish or electro galvanised, 30 mm wide flap (when open), fixed in repairs, complete all as specified. |
| 60 | Supply and fixed in repair 15mm angle valves, cast copper alloy chromium plated(fancy type), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 61 | S & F 75mm size mild steel butt hinges medium weight cold rolled and fixed. |
| 62 | S & F 100mm size extruded aluminium alloy handles, fabricated type anodised |
| 63 | S&F for 100 mm size hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws, complete all as specified. |
| 64 | S & F in repair vitreous china wash down water closet pan of pedestal pattern, white with 'P' or 'S' traps, including connecting to trap and to flushing pipe etc complete all as specified. |
| 65 | Dismantling of PVC(SWR),in any position and in any description pattern including all fittings etc complete all as specified and directed. |
| 66 | Supply and fix in repairs PVC (SWR) WC connector 110mm dia with lip ring with rubber ring joints fixed to walls complete all as specified and directed. |
| 67 | Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 68 | Supply and fix 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified and directed. |
| 69 | Supply and fix 110mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 70 | Supply and fix 110mm bore PVC (SWR) junction single , (single T) equal or unequal with access door complete all as specified and directed. |
| 71 | Supply and fix 75mm bore PVC (SWR) bends any radius with access door complete all as specified and directed. |
| 72 | Supply and fix 110mm bore PVC (SWR) vent cowl complete all as specified and directed. |
| 73 | S&F in rep PVC (SWR) floor trap, 75mm dia outlet, plain with grating incl jointing with solvent cement, complete all as specified and directed. |
| 74 | Supply and Fix in rep 15mm bore galvanised iron tube, medium grade, with all new fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 75 | Supply and fix in rep 20mm bore galvanised iron tube, medium grade, with all new fittings, fixed to walls and ceiling or laid in floor complete all as specified and directed. |
| 76 | S&F in repair 15mm brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed in bath shower,wash basin & kichen sink with complete all as specified and directed. |
| 77 | Supply and Fix in repairs plate rack made of stainless steel 0.50mm thick,over all size 762mm(H)x787mm(W)x254mm(D) complete all as specified and directed. |
| 78 | S & F in repairs chromium plated fancy type 15mm dia stop cock, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 79 | S & F in repairs chromium plated fancy type 15mm dia bib tap, cast copper alloy with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specifed. |
| 80 | S & F in repairs chromium plated fancy type pillar taps 15mm dia cast copper alloy with capstan heads, screwed down high pressure, with lettered \\"hot or cold\\" with long screwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed |
| 81 | S&F in Repairs vitreous china wash hand basin white flat back of size 550mmx400 mm including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia complete all as specified and directed |
| 82 | S & F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve, float, chain and pull and brackets etc complete all as specified and directed |
| 83 | S & F in repair PVC connection 15mm dia 450 mm long with brass check nuts and washers complete all as specified and directed |
| 84 | S & F in repair plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed |
| 85 | S&F in repair for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 86 | S&F in repair CP towel ring of PTMT fixed with chromium plated brass screws (Min wt 90 gms) |
| 87 | S&F in repair soap dish, any type, fiexd to plugs with chromium plated brass screws complete all as specified and directed |
| 88 | S&F in repair CP towel rail 450mm long of PTMT fixed with chromium plated brass screws (Min wt 190 gms) complete all as specified and directed |
| 89 | Supply and fix in repairs, stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to steel frames with tinned tacks, or galvanized wire staples, or fixed to wooden frames with first class hard wood bead, complete all as specified and directed. |
| 90 | M&L Welding in repairs exc 2.5 cm but n.exceeding 2.5cm in length (thickness of metal to be welded not exceeding 6mm) including cleaning preparing the surface and holding the members in true position for maintenance of steel items such as gates, grills, doors, windows etc., complete all as specified and as directed. |
| 91 | Supply and fix, clolthes hook/hangers stainless steel set of five casted on strip, complete all as specified and directed. |
| 92 | S &F in repairs 15mm swivel shower of PTMT any colour (minimum weigth-40gms) including 15mm shower arm, 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gm) complete all as specified and directed. |
| 93 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 94 | S&F in Repairs of Single piece European water closet white colour with soft seat cover, 5D Powerful syphonic flushing system and rimless bowl, size 67x36x74.5 cm complete all as specified and directed |
| 95 | S&F in repair Looking mirror 600 mm x 450 mm beveled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden plugs with steel screws in repairs, complete all as specified. |
| 96 | S& F for Cabinet mirror with plastic / ABS body with selve complete all as specified and directed |
| 97 | S & F in repairs stainless steel sinks with drainage board made out of 1.00 mm thick sheet for kitchen with plugs, washers, waste pipes, including bedding in cement mortar to dwarf wall or including fixing cast iron cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm with bowl size 410mm x 330mm x 160mm, with and including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, complete all as specified. |
| 98 | S&F in repairs sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, including PVC waste pipe and CP waste coupling 32 mm dia and making good to disturbed surfaces, complete all as specified and directed. |
| 99 | S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight - 20mm-210gm) Please Enable Macros to View BoQ information |
