|
| 1 | Excavation in trenches in soft/loose soil, n. exc. 1.5 M wide and n.exc 1.5 M in depth, to required level and gradient for laying of pipe etc and getting out complete all as specified and directed by Engr-in-Charge. |
| 2 | Returning, filling in, including spreading, leveling, watering and well ramming in layers n.exc 25cm thick in soft/loose soil complete all as specified and directedby Engr-in-Charge |
| 3 | Removing excavated materials (soft/loose soil) to a distance n.exc. 50 M and depositing where directed at a level n.exc. 1.5 M above the starting point complete all as specified and directed by Engr-in-Charge |
| 4 | Taking up or down for 100mm bore old steel tubing and connections complete all as specified & directed by Engr-in-Charge. |
| 5 | All as per item No-4 above but 80mm bore. |
| 6 | All as per item No-4 above but 50mm bore. |
| 7 | All as per item No-4 above but 40mm bore. |
| 8 | All as per item No-4 above but 25mm bore |
| 9 | All as per item No-4 above but 20mm bore. |
| 10 | All as per item No-4 above but 15 mm bore. |
| 11 | Refixing/relaying for the 100 mm bores old steel tubing in new or old position including new ISI GI fittings after cleaning by suitable chemical, roding, cutting to required length, screwing ends etc. as per site requirement complete including existing connection with required size of Tee or MS clamp with rubber bush all as specified and directed by Engr-in-Charge for the following bores: -Note: GI pipe retrieved from item No. 4 here-in-before shall be used after cleaning . |
| 12 | All as per item No-11 above but 80mm bore.Note: GI pipe retrieved from item No. 5 here-in-before shall be used after cleaning complete all as specified and directed by Engr-in-Charge |
| 13 | All as per item No-11 above but 50mm bore.Note: GI pipe retrieved from item No. 6 here-in-before shall be used after cleaning. |
| 14 | Supply, laying and jointing for the 100mm bore in trenches/on floor/wall, galvanized steel tubing medium grade including ISI marked GI fittings, including cutting to reducing length, screwing and connecting with existing line including fix existing connection with required size of Tee or MS clamp with rubber bush complete all as specified and directed by Engr-in-Charge |
| 15 | All as per item No-14 above but 80mm bore. |
| 16 | All as per item No-14 above but 50mm bore. |
| 17 | All as per item No-14 above but 40mm bore. |
| 18 | All as per item No-14 above but 25mm bore. |
| 19 | All as per item No-14 above but 20mm bore. |
| 20 | All as per item No-14 above but 15mm bore. |
| 21 | Taking up/down 100 mm bore of cast iron/ductile iron water mains(including all fittings), with spigot and socket ends and lead joints including burning out joints and receiving lead complete all as specified and directed by Engr-in-Charge .-. |
| 22 | All as per item No-21 above but 150mm bore. |
| 23 | All as per item No-21 above but 200mm bore. |
| 24 | All as per item No-21 above but 250mm bore. |
| 25 | M&L for 100 mm bore centrifugally cast (spun) ductile iron pressure pipes for water mains with socket & spigot ends conforming to IS 8329/2000 any length for classification of K7 suitable for rubber gasket joint (push on type) with cement mortar lining inside the pipe with outside zinc coating complete all including existing connection with required size of Tee or MS clamp with rubber bush as complete all as specified and directed by Engr-in-Charge. Note :Cutting of pipe, fittings for pipe shall be measured and paid separately under respective items of Sch 'A' |
| 26 | All as per item No-25 above but 150mm bore. |
| 27 | All as per item No-25 above but 200mm bore. |
| 28 | All as per item No-25 above but 250mm bore. |
| 29 | M&L for push on tyton (rubber gasket) joints for 100 mm bore DI pipe complete all as specified and directed by Engr-in-Charge |
| 30 | All as per item No-29 above but 150mm bore. |
| 31 | All as per item No-29 above but 200mm bore. |
| 32 | All as per item No-29 above but 250mm bore. |
| 33 | Cutting existing Cast Iron pipes in position (comprising of two cuts) for insertion of new iron fittings (tees, branches etc) complete of the size 100 mm bore of pipe complete all as specified and directed by Engr-in-Charge |
| 34 | All as per item No-33 above but 150mm bore of pipe. |
| 35 | All as per item No-33 above but 200mm bore of pipe. |
| 36 | All as per item No-33 above but 250mm bore of pipe. |
| 37 | S&F GM gate valve with iron wheel ISI marked IS-778 screwed down for iron pipe or ferrule including fittings such as union , socket, nipple , check nut etc of size 50 mm including cutting of existing GI pipe and fixing properly and taking down of old unserviceable PVC stop valve/gun metal gate valve complete all as specified and directed by Engr-in-Charge |
| 38 | All as per item No. 37 above but of size 40mm dia. |
| 39 | All as per item No. 37 above but of size 25mm dia. |
| 40 | All as per item No. 37 above but of size 20mm dia. |
| 41 | M & L for repairs to leakage of cast iron pipe line 500 mm dia size including excavation earth work in any type of soil, burning out old lead, cleaning joint and filling with fresh pig lead and cocking to make joint leak free complete all as specified and directed by Engr-in-Charge |
| 42 | All as per item No. 41 above but of size 400 mm bore |
| 43 | All as per item No. 41 above but of size 300 mm bore |
| 44 | All as per item No. 41 above but of size 250 mm bore |
| 45 | All as per item No. 41 above but of size 200 mm bore |
| 46 | All as per item No. 41 above but of size 150 mm bore |
| 47 | All as per item No. 41 above but of size 100mm bore |
| 48 | All as per item No. 41 above but of size 80mm bore |
| 49 | M&L for 400mmx400mm size \\"D\\" joint made out of CI collar and rubber ring ccomplete all as specified and directed by Engr-in-Charge |
| 50 | All as per item No-49 above but for 300mmx3000mm size. |
| 51 | All as per item No-49 above but for 250mmx250mm size. |
| 52 | All as per item No-49 above but for 200mmx200mm size. |
| 53 | All as per item No-49 above but for 150mmx150mm size. |
| 54 | All as per item No-49 above but for 100mmx100mm size. |
| 55 | All as per item No-49 above but for 80mmx80mm size. |
| 56 | All as per item No-49 above but for 50mmx50mm size. |
| 57 | S&F cast iron fittings for spigot socketed pipe like bends (any type, radius and angle), tapers any type (straight , bend, increasing, decreasing or double socket etc), Tee pieces, single branch, 'Y' junction, double branch, cross (all socket and spigot) collars, caps and plugs etc suitable for pipe line up to 400 mm bore complete all as specified and directed by Engr-in-Charge |
| 58 | S&F ductile iron fittings for spigot socketed pipe like bends (any type, radius and angle), tapers any type (straight , bend, increasing, decreasing or double socket etc), Tee pieces, single branch, 'Y' junction, double branch, cross (all socket and spigot) collars, caps and plugs etc suitable for pipe line up to 400 mm bore complete all as specified and directed by Engr-in-Charge |
| 59 | M & L in repairs 80mm bore Cast Iron sluice valve both ends flanged PN-1.6 with iron wheel (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed by Engr-in-Charge |
| 60 | All as per item No- 59 above but of size 100mm bore |
| 61 | All as per item No- 59 above but of size 150mm bore |
| 62 | All as per item No- 59 above but of size 200mm bore |
| 63 | All as per item No- 59 above but of size 250mm bore |
| 64 | All as per item No- 59 above but of size 300mm bore |
| 65 | M & L in repairs 80mm bore Cast Iron Non Return valve (NRV) both ends flanged PN-1.6 (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed by Engr-in-Charge |
| 66 | All as per item No- 65 above but of size 100mm bore |
| 67 | All as per item No- 65 above but of size 150mm bore |
| 68 | All as per item No- 65 above but of size 400mm bore |
| 69 | M & L in repairs 80mm bore Cast Iron Foot valve one ends flanged (ISI Marked including nuts, bolts, washer and 3 mm thick rubber insertion sheet complete all as specified and directed by Engr-in-Charge |
| 70 | All as per item No-69 above but 100 mm bore. |
| 71 | All as per item No-69 above but 150 mm bore. |
| 72 | All as per item No-69 above but 200 mm bore. |
| 73 | All as per item No-69 above but 250 mm bore. |
| 74 | S & F in repairs of spindle of sluice valve 500mm bore (stainless steel) including check nuts made out of stainless steel complete all as specified and directed by Engr-in-Charge |
| 75 | All as per item No 74 above but 400mm bore |
| 76 | All as per item No 74 above but 300mm bore |
| 77 | All as per item No 74 above but 250mm bore |
| 78 | All as per item No 74 above but 200mm bore |
| 79 | All as per item No 74 above but 150mm bore |
| 80 | All as per item No 74 above but 100mm bore |
| 81 | All as per item No 74 above but 80mm bore |
| 82 | M & L for road cutting for laying of pipe line and making good after laying to match with surrounding area with PCC 1:2:4 type B-1 using 20 mm graded stone aggregate for a depth of 30 cm from top and balance portion shall be filled with approved earth complete all as specified and directed by Engr-in-Charge. |
| 83 | M&L for boring of holes under road, pavement, hard standing by trenchless technology using necessary machinery and labour for laying underground pipe GI/DI up to size 300mm complete all as specified and directed by Engr-in-Charge at site.. Note : Pipes will be measured and paid separately. |
| 84 | M&L for construction of valve chamber of size 1000x1000x1000 mm internal size including necessary earth work excavation, PCC 1:4:8 type D2 for foundation, fly ash brick work in cement mortar 1:4, PCC 1;2:4 type B1 for coping, 15 mm thick rendering in cement mortar 1:4 including provision of mild steel cover 3 mm thick with hinge on 40x40x6 mm angle iron frame work with 2 coats of synthetic enamel paint over a coat of zinc chrome primer and locking arrangments complete all as specified |
| 85 | M&L for construction of valve chamber of size 2000x2000x2000 mm internal size including necessary earth work excavation, PCC 1:4:8 type D2 for foundation, fly ash brick work in cement mortar 1:4, PCC 1;2:4 type B1 for coping, 15 mm thick rendering in cement mortar 1:4 including provision of mild steel cover 3 mm thick with hinge on 40x40x6 mm angle iron frame work with 2 coats of synthetic enamel paint over a coat of zinc chrome primer and locking arrangments complete all as specified |
| 86 | S&F Cast Iron Air Valves with two air Outlets, 250 mm dia bore and fixing up in cast iron water supply mains complete as specified. Please Enable Macros to View BoQ information |
