|
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc. 400 sqm and exc. 50 mm and n. exc. 100 mm deep and including applying evenly a tack coat of Cationic Bitumen Emulsion (RS 1)conforming to IS : 8887 @ 0.20-0.30 Kg / Sqm on bituminous Surface / WBM Surface of road by mechanical sprayer complete all as specified and directed. |
| 2 | M&L consolidated thickness 75 mm or less, premixed bituminous macadam laid, spread using mechanical paver with 4% binder content by weight of total mix, using paving bitumen binder of grade VG-30 grade by weight of total mix, rolled and compacted to required gradient and camber using power roller of capacity exc. 8 tonne but not exc. 12 tonne complete all as specified and directed. |
| 3 | M&L bituminous premixed semi-dense asphaltic concrete 30 mm consolidated thickness with 5.5 % binder content using paving bitumen of grade VG-30 penetration by weight of total mix laid using mechanical paver, rolled and compacted to required gradient and camber using power roller of capacity exc. 8 tonne but not exc.12 tonne power roller and including preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bag to remove loose dirt and incuding applying evenly a tack coat of Cationic Bitumen Emulsion (RS 1) conforming to IS : 8887 @ 0.20-0.30 Kg / Sqm over existing black top surfaces by mechanical sprayer complete all as specified and directed. |
| 4 | Note: For design purpose min. binder content is specified as 5.5% for VG-30 grade bitumen and it shall not reduce under any circumstances. During design stage, if binder content exceeds 5.5% no extra payment shall be made to contractor for excess use of binder. |
| 5 | M&L preparing bituminous surfaces of road and inluding marking with 2.5 mm thick centre lines, stop lines, dashes, arrows etc. and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instructions complete all as specified and directed. |
| 6 | S&F in repair road studs (Cat Eye) two way reflective of Size 100 x100 x 25 mm (min size) and max size according to manufacturer made with ABS material, scratch and abrasion resistant, micro plastic, temperature resistant body complete all as specified and directed. |
| 7 | S&F in repairs solar cat eye aluminum alloy shall (100 % water proofing design according to 65) of size 125 x 125 x 25 mm (shank 65 mm) of high efficiency mono rystafie solar panel 2.4V / 0.3 watt one NI-ed rechargeable battery (1.2V / 1600 MA) consisting of super bright LED with 10,000 to 18,000 mcd as per manufactures instructions complete all as specified and directed. |
| 8 | M&L providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), and including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed. |
| 9 | M&L preparation of new concrete surfaces of any description not otherwise described over 10 cm width or girth and including applying two coats of synthetic enamel paint over a coat of priming paint as per manufactures instructions complete all as specified and directed. |
| 10 | M&L prepration of old painted concrete surfaces over 10 cm girth or width, not otherwise described and including applying one coat of synthetic enamel paint complete all as specified and directed. |
| 11 | M&L 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in subbase of flooring / hard standing and including demolition complete all as specified and directed. |
| 12 | M&L 50 mm thick M Sand (stone dust) cushioning for laying of pecast concrete Interlocking tiles and including watering and consolidation complete all as specified and directed. |
| 13 | M&L 100 mm thick, M 50 grade machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 using grey cement & pigment and including demolition complete all as specified and directed. |
| 14 | M&L PCC 1:2:4, type B1 (using 20 mm graded stone aggregate) as in coping , kerbs kneelers, apex stones, mass concrete, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specificed and directed. |
| 15 | M&L moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering for berm filling both sides of road complete all as specificed and directed. Please Enable Macros to View BoQ information M&L 50 mm thick M Sand (stone dust) cushioning for laying of Precast Concrete Interlocking Tiles including watering and consolidation complete all as specified and directed. |
